How to Service and Repair Crossmember Bushings on Chrysler Sebring?

When press-fitting, moisten the bushing place with soapy water. For bushing A, the inner pipe projection should measure 9.0 ± 1.0 mm (0.35 ± 0.04 inch) and for bushing B, the standard is 4.0 ± 1.0 mm (0.16 ± 0.04 inch). Insert the special tool into crossmember bushing C and push to remove the bushing, then use the tool to press in a new one so that the inner pipe projection is 4.0 ± 0.5 mm (0.16 ± 0.02 inch) long.

OEM Chrysler Sebring Crossmember Bushing

Crossmember Mount

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 Crossmember Bushings found

View related parts
Chrysler Sebring Crossmember Bushing, Front Part Number: MR311113
Product Specifications
- Other Name: Bushing - Front Axle Crossmember; Engine Mount Crossmember Insulator; Frame Crossmember Insulator; Center Crossmember Bushing; Bushing Front Axle Crossmember
- Position: Front
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1999-2005 Chrysler Sebring | Base, LX, LXi, Limited | 4 Cyl 2.4 L GAS, 6 Cyl 2.5 L GAS, 6 Cyl 3.0 L GAS
View related parts
Chrysler Sebring Crossmember Bushing, Front Part Number: MB303650
Product Specifications
- Other Name: Bushing - Front Axle Crossmember; Bushing, Front Axle Crossmember; Bushing Front Axle Crossmember
- Position: Front
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1995-1999 Chrysler Sebring | LX, LXi | 4 Cyl 2.0 L GAS, 6 Cyl 2.5 L GAS
View related parts
Chrysler Sebring Engine Cradle Rear Bushing, Front Outer Part Number: MB871921
Product Specifications
- Other Name: Bushing - Front Axle Crossmember; Engine Cradle Insulator, Outer; Engine Cradle Bushing; Bushing, Front Axle Crossmember; Bushing Front Axle Crossmember
- Position: Front Outer
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1995-2005 Chrysler Sebring | Base, LX, LXi | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS, 6 Cyl 2.5 L GAS
View related parts
Chrysler Sebring Engine Cradle Front Bushing, Center Part Number: MB870742
Product Specifications
- Other Name: Bushing - Front Axle Crossmember; Engine Cradle Insulator, Center; Engine Cradle Bushing; Bushing, Front Axle Crossmember; Bushing Front Axle Crossmember
- Position: Front Center
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1995-2005 Chrysler Sebring | Base, LX, LXi | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS, 6 Cyl 2.5 L GAS
View related parts
Chrysler Sebring Engine Cradle Bushing, Inner Part Number: MR244103
Product Specifications
- Other Name: Bushing - Axle Shaft; Engine Cradle Insulator, Inner
- Position: Inner
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2005 Chrysler Sebring | Base, LX | 4 Cyl 2.4 L GAS
View related parts
Chrysler Sebring Suspension Crossmember Isolator, Front Part Number: 4766484AC
Product Specifications
- Other Name: Isolator - Crossmember; Suspension Crossmember Insulator, Front Rearward; Coil Spring Insulator; Isolator; Isolator Crossmember
- Position: Front
- Replaces: 4766484AB, 4766484AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2010 Chrysler Sebring | LX, Limited, Touring | 2.4L L4, 2.7L V6, 3.5L V6, 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS
View related parts
Chrysler Sebring Suspension Crossmember Isolator, Front Part Number: 4766483AB
Product Specifications
- Other Name: Isolator - Crossmember; Suspension Crossmember Insulator, Front Forward; Coil Spring Insulator; Isolator; Isolator Crossmember
- Position: Front
- Replaces: 4766483AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2010 Chrysler Sebring | LX, Limited, Touring | 2.4L L4, 2.7L V6, 3.5L V6, 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS

Chrysler Sebring Crossmember Bushing

Choose OEM Crossmember Bushing that meet Chrysler factory standards. Chrysler designs and tests every component for precision and durability. Each Crossmember Bushing follows strict manufacturing steps to lock in quality and fit. If your Chrysler Sebring matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Sebring parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

Chrysler Sebring Crossmember Bushing Parts and Q&A

Crossmember Bushing, Front
MR311113
Q: How to Service and Repair Crossmember Bushings on Chrysler Sebring?
A:
When press-fitting, moisten the bushing place with soapy water. For bushing A, the inner pipe projection should measure 9.0 ± 1.0 mm (0.35 ± 0.04 inch) and for bushing B, the standard is 4.0 ± 1.0 mm (0.16 ± 0.04 inch). Insert the special tool into crossmember bushing C and push to remove the bushing, then use the tool to press in a new one so that the inner pipe projection is 4.0 ± 0.5 mm (0.16 ± 0.02 inch) long.