How to Inspect and Replace Sway Bar Bushings on Chrysler Sebring?

Review the sway bar bushings to make sure their retainer is not separated or their bushing is not damaged. Should you need to change the bushings, open the slit and pull them out of the sway bar. While introducing the sway bar into the vehicle, put it in last, just like you removed it. Position the bend in the end closer to you on the side so that it leans upward. Attach the sway bar to the forward lateral link attaching links and mount the bushings on the links, then fasten the bushings with the retaining nuts tightened to a torque of 35 Nm (26 ft. lbs.). Place the sway bar bushing clamps near the rear suspension crossmember in a loose fashion, center the sway bar in the vehicle body to prevent contact and also prevent it from touching any other part of the suspension. Put in 27 Nm (19 ft. lbs.) of torque to secure the sway bar bushing clamps to the rear crossmember. Having installed the wheel and tire, tighten the stud nuts in the right pattern to halfway specifications and then tighten them again to reach the full specifications of 135 Nm (100 ft. lbs.). When you are done, lower the car back onto the ground.

How to Service a Sway Bar Bushing on Chrysler Sebring?

The first step to replace the front sway bar bushing is to bend back the retainer's four crimp spots. After that, remove the sway bar bushing retainer. Pull back the top of the bushing and take it off the sway bar by peeling it off. When you install the sway bar, put a bushing on the sway bar so that the slit on the bushing points to the front of the vehicle. Lastly, slip the retainers back onto the bushings of the sway bar.

OEM Chrysler Sebring Sway Bar Bushing

Stabilizer Sway Bar Bushing

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

14 Sway Bar Bushings found

View related parts
Chrysler Sebring Stabilizer Bar Bushing, Rear Part Number: 4782339AA
$6.71 MSRP: $11.85
You Save: $5.14 (44%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bushing - Sway Bar; Suspension Stabilizer Bar Bushing, Rear; Sway Bar Bushing; Bushing; Bushing Stabilizer Bar
- Position: Rear
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006 Chrysler Sebring | Base, GTC, Limited, Touring | 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L GAS
View related parts
Chrysler Sebring Stabilizer Bar Bushing, Rear Part Number: 4782338AA
$10.37 MSRP: $15.40
You Save: $5.03 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bushing - Sway Bar; Suspension Stabilizer Bar Bushing, Rear; Bushing; Bushings; Bushing Stabilizer Bar
- Position: Rear
- Replaces: 4695744
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1999-2006 Chrysler Sebring | Base, GTC, LX, LXi, Limited, TSi, Touring | 2.4L L4, 2.5L V6, 2.7L V6, 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.0 L GAS
- 1996 Chrysler Sebring | 2.4L L4, 2.5L V6
View related parts
Chrysler Sebring Stabilizer Bar Bushing, Front Part Number: 5272590AC
$18.13 MSRP: $26.80
You Save: $8.67 (33%)
ADD TO CART
Product Specifications
- Other Name: Bushing - Stabilizer Bar; Front Suspension Stabilizer Bar Bushing; Sway Bar Bushing.; Stabilizer Bar Cushion; Bushings; Bushing Stabilizer Bar
- Position: Front
- Replaces: 5272590AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2010 Chrysler Sebring | Base, LX, Limited, Touring | 2.4L L4, 2.7L V6, 3.5L V6, 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS
View related parts
Chrysler Sebring Stabilizer Bar Bushing, Rear Part Number: 5272649AC
$10.83 MSRP: $14.80
You Save: $3.97 (27%)
ADD TO CART
Product Specifications
- Other Name: Cushion - Sway Eliminator; Rear Suspension Stabilizer Bar Bushing Kit.; Bushings; Cushion Sway Eliminator
- Position: Rear
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2010 Chrysler Sebring | Base, LX, Limited, Touring | 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS
View related parts
Chrysler Sebring Stabilizer Bar Cushion Part Number: 4879307AA
$5.26 MSRP: $6.67
You Save: $1.41 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bushing - Sway Eliminator; Suspension Stabilizer Bar Bushing Kit.; Bushings; Cushion Sway Eliminator
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2006 Chrysler Sebring | Base, GTC, LX, LXi, Limited, TSi, Touring | 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.0 L GAS
View related parts
Chrysler Sebring Stabilizer Bar Bushing, Front Part Number: 5272589AC
$18.05 MSRP: $26.80
You Save: $8.75 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bushing - Stabilizer Bar; Front Suspension Stabilizer Bar Bushing; Sway Bar Bushing.; Stabilizer Bar Cushion; Bushings; Bushing Stabilizer Bar
- Position: Front
- Replaces: 5272589AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2010 Chrysler Sebring | Base, LX, Limited, Touring | 2.4L L4, 2.7L V6, 3.5L V6, 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS
View related parts
Chrysler Sebring Stabilizer Bar Bushing, Front Part Number: MR589817
$7.50 MSRP: $8.60
You Save: $1.10 (13%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bushing - Sway Bar; Suspension Stabilizer Bar Bushing, Front; Sway Bar Bushing; Bushings; Bushing Stabilizer Bar
- Position: Front
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2005 Chrysler Sebring | LX, LXi, Limited | 6 Cyl 3.0 L GAS
View related parts
Chrysler Sebring Stabilizer Bar Bushing Part Number: MR297507
Product Specifications
- Other Name: Bushing - Stabilizer Bar; Sway Bar Bushing; Bushings; Bushing Stabilizer Bar; Bushing
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1995-2000 Chrysler Sebring | LX, LXi | 4 Cyl 2.0 L GAS, 6 Cyl 2.5 L GAS
View related parts
Chrysler Sebring Stabilizer Assembly Cushion Part Number: 4616987
Product Specifications
- Other Name: Bushing - Sway Eliminator; Suspension Stabilizer Bar Bushing Kit.; Stabilizer Bar Cushion; Bushings; Shaft, Front Suspension Sway; Cushion Sway Eliminator
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1996-2000 Chrysler Sebring | JX, JXi | 4 Cyl 2.4 L GAS, 6 Cyl 2.5 L GAS
View related parts
Chrysler Sebring Stabilizer Bar Bushing, Rear Part Number: MR297629
Product Specifications
- Other Name: Bushing - Sway Bar; Suspension Stabilizer Bar Bushing, Rear; Sway Bar Bushing; Bushings; Bushing Stabilizer Bar
- Position: Rear
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2004 Chrysler Sebring | Base | 4 Cyl 2.4 L GAS
View related parts
Chrysler Sebring Stabilizer Bar Bushing Part Number: MR297501
Product Specifications
- Other Name: Bushing - Sway Bar; Sway Bar Bushing; Cushion; Bushings; Bushing, Front Suspension Stabilizer; Bushing Stabilizer Bar
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1995-2000 Chrysler Sebring | LX, LXi | 4 Cyl 2.0 L GAS, 6 Cyl 2.5 L GAS
View related parts
Chrysler Sebring Stabilizer Bar Bushing, Rear Part Number: MR272717
Product Specifications
- Other Name: Bushing - Sway Bar; Rear Suspension Stabilizer Bar Bushing Kit.; Bushings; Bushing Stabilizer Bar
- Position: Rear
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2005 Chrysler Sebring | Base, LX, Limited | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS
View related parts
Chrysler Sebring Stabilizer Bar Bushing Part Number: 4616087
Product Specifications
- Other Name: Bushing - Sway Bar; Sway Bar Bushing; Stabilizer Link Bushing; Sway Bar Bushing (Rubber Ms - Z77, Plate Steel-4480A1Bd5-1R)
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1996-2000 Chrysler Sebring | JX, JXi | 4 Cyl 2.4 L GAS, 6 Cyl 2.5 L GAS
View related parts
Chrysler Sebring Stabilizer Bar Bushing, Front Part Number: MR589815
Product Specifications
- Other Name: Bushing - Sway Bar; Suspension Stabilizer Bar Bushing, Front; Sway Bar Bushing; Bushings; Bushing Stabilizer Bar; Suspension Stabilizer Bar Bushing
- Position: Front
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2005 Chrysler Sebring | Base, LX | 4 Cyl 2.4 L GAS

Chrysler Sebring Sway Bar Bushing

Choose OEM Sway Bar Bushing that meet Chrysler factory standards. Chrysler designs and tests every component for precision and durability. Each Sway Bar Bushing follows strict manufacturing steps to lock in quality and fit. If your Chrysler Sebring matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Sebring parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

When it comes to car stability and a comfortable ride the Sway Bar Bushing installed on Chrysler Sebring means a lot. These bushings are intended to help the car to better to overcome ostiles, decrease sound level and maintain the sway bar, which allows not to roll during turns. Most of Chrysler Sebring models usually have both the front and rear sway bar bushings that enhance stability of the car. Eventually, the Sway Bar Bushing may get worn out and this will make the car respond poorly, develop rattling, and squeaking noises. Such symptoms can transform into other worse handling issues affecting safety as indicated below. The Sway Bar Bushing requires periodic service and renewal of lubrication in Chrysler Sebring to enhance its performance: this is in regard to the fact that such elements should be fixed as soon as possible if there are indications of their wear out.

Chrysler Sebring Sway Bar Bushing Parts and Q&A

Stabilizer Bar Bushing, Rear
4782338AA
Q: How to Inspect and Replace Sway Bar Bushings on Chrysler Sebring?
A:
Review the sway bar bushings to make sure their retainer is not separated or their bushing is not damaged. Should you need to change the bushings, open the slit and pull them out of the sway bar. While introducing the sway bar into the vehicle, put it in last, just like you removed it. Position the bend in the end closer to you on the side so that it leans upward. Attach the sway bar to the forward lateral link attaching links and mount the bushings on the links, then fasten the bushings with the retaining nuts tightened to a torque of 35 Nm (26 ft. lbs.). Place the sway bar bushing clamps near the rear suspension crossmember in a loose fashion, center the sway bar in the vehicle body to prevent contact and also prevent it from touching any other part of the suspension. Put in 27 Nm (19 ft. lbs.) of torque to secure the sway bar bushing clamps to the Rear Crossmember. Having installed the wheel and tire, tighten the stud nuts in the right pattern to halfway specifications and then tighten them again to reach the full specifications of 135 Nm (100 ft. lbs.). When you are done, lower the car back onto the ground.
Stabilizer Bar Cushion
4879307AA
Q: How to Service a Sway Bar Bushing on Chrysler Sebring?
A:
The first step to replace the front sway bar bushing is to bend back the retainer's four crimp spots. After that, remove the sway bar bushing retainer. Pull back the top of the bushing and take it off the sway bar by peeling it off. When you install the sway bar, put a bushing on the sway bar so that the slit on the bushing points to the front of the vehicle. Lastly, slip the retainers back onto the bushings of the sway bar.