How to Maintain and Repair a Fuel Tank on Chrysler Sebring?

Before you service or repair the fuel tank unit, relieve the fuel pressure and then take the fuel tank out, because the fuel reservoir in the fuel pump module won't empty when you drain the tank and spillage might occur when you take off the module. Open the fuel line when you push in the quick connect retainers with your thumb and forefinger on the fuel pump module. After that, press the lock on the electrical connector down, then gently pull the electrical connector away from the module. Make a mark on the vehicle where the fuel pump will be mounted. Attach tool 9340 to the module lock ring and spin it to remove the ring, then pull the fuel pump and O-ring seal from the tank, getting rid of the old seal afterward.

How to Maintain and Fix a Fuel Tank on Chrysler Sebring?

Before servicing or repairing the fuel tank unit, start by removing the fuel pressure, then take out the fuel tank, keeping in mind that the fuel reservoir of the fuel pump module will spill during removal. Start by depressing the quick connect retainers on the fuel line, then simply slide the lock on the fuel pump module's electrical connector to unlock it. Press down on the connector retainer and pull the connector out from the module to release the electrical connection and put a mark near the fuel pump. Punch and hammer the lock ring holding the fuel pump module off with a brass punch, pull the old fuel pump and seal from the tank and throw away the old seal. After cleaning the seal area, add a new seal into the tank, fit the pump into place inside and cover the pump with the lockring which you then tighten with a brass punch and a hammer. Reattach the electrical wiring and fuel line to the pump, place the fuel tank beneath the car, drop the vehicle, link the battery cable and fill up the fuel tank. Let the DRB III(R) scan tool pressurize the fuel system and check if any leaks are found.

OEM Chrysler Sebring Fuel Tank

Gas Tank

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

13 Fuel Tanks found

View related parts
Chrysler Sebring Fuel Tank Part Number: MN106212
Product Specifications
- Other Name: Tank; Tank Assembly
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2002-2004 Chrysler Sebring | Base, LX | 4 Cyl 2.4 L GAS
View related parts
Chrysler Sebring Fuel Tank Part Number: 5013445AB
$581.66 MSRP: $847.00
You Save: $265.34 (32%)
Product Specifications
- Other Name: Tank - Fuel; Tank Fuel
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1999-2000 Chrysler Sebring | JX, JXi | 6 Cyl 2.5 L GAS
View related parts
Chrysler Sebring Fuel Tank Part Number: MR134739
Product Specifications
- Other Name: Tank Assembly, Fuel; Tank Assembly; Tank Fuel
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1996-1998 Chrysler Sebring | LX, LXi | 4 Cyl 2.0 L GAS, 6 Cyl 2.5 L GAS
View related parts
Chrysler Sebring Fuel Tank Part Number: 1700A015
Product Specifications
- Other Name: Tank; Tank Assembly; Fuel Tank Assembly
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2005 Chrysler Sebring | Limited | 6 Cyl 3.0 L GAS
View related parts
Chrysler Sebring Fuel Tank Part Number: 1700A014
Product Specifications
- Other Name: Tank; Tank Assembly; Fuel Tank Assembly
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2005 Chrysler Sebring | Base | 4 Cyl 2.4 L GAS
View related parts
Chrysler Sebring Fuel Tank Part Number: 5093454AC
Product Specifications
- Other Name: Fuel
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2003-2004 Chrysler Sebring | Base, GTC, LX, LXi, Limited, Touring | 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.0 L GAS
View related parts
Chrysler Sebring Fuel Tank Part Number: 5093453AC
Product Specifications
- Other Name: Fuel
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2003-2005 Chrysler Sebring | Base, GTC, LX, LXi, Limited, TSi, Touring | 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS
View related parts
Chrysler Sebring Fuel Tank Part Number: 5093453AE
Product Specifications
- Other Name: Fuel
- Replaces: 5093453AD, 5093453AF
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2005-2006 Chrysler Sebring | Base, GTC, Limited, Touring | 2.7L V6, 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS
View related parts
Chrysler Sebring Fuel Tank Part Number: 68159522AA
Product Specifications
- Other Name: Tank - Fuel
- Replaces: 5085701AD, 5085701AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2010 Chrysler Sebring | Base, LX, Limited, Touring | 2.4L L4, 2.7L V6, 3.5L V6, 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS
View related parts
Chrysler Sebring Fuel Tank Part Number: MN106213
Product Specifications
- Other Name: Tank; Tank Assembly
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2002-2004 Chrysler Sebring | LX, LXi, Limited | 6 Cyl 3.0 L GAS
View related parts
Chrysler Sebring Fuel Tank Part Number: 5013445AD
Product Specifications
- Other Name: Tank - Fuel; Tank Fuel
- Replaces: 5013445AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2002 Chrysler Sebring | GTC, LX, LXi, Limited | 2.4L L4, 2.7L V6, 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L GAS, 6 Cyl 3.0 L GAS
View related parts
Chrysler Sebring Fuel Tank Part Number: 5170943AB
Product Specifications
- Other Name: Fuel
- Replaces: 5170943AA, 5170943AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006 Chrysler Sebring | Base, Limited, TSi, Touring | 2.4L L4, 2.7L V6, 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS
View related parts
Chrysler Sebring Fuel Tank Part Number: 68171752AA
Product Specifications
- Other Name: Tank - Fuel; Tank Fuel
- Replaces: 4766135AC, 68171752AB, 68109940AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2010 Chrysler Sebring | LX, Limited, Touring | 2.4L L4, 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS

Chrysler Sebring Fuel Tank

Choose OEM Fuel Tank that meet Chrysler factory standards. Chrysler designs and tests every component for precision and durability. Each Fuel Tank follows strict manufacturing steps to lock in quality and fit. If your Chrysler Sebring matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Sebring parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

The Fuel Tank of Chrysler Sebring vehicles acts as a modification for the storage of fuel for supplying the engine needs while locating the fuel pump and fuel gauge sender. For example, Chrysler Sebring Fuel Tanks are principally built from either metal or macle, specifically High Density Polyethylene (HDPE) plastic because these materials are specially suited for undercar conditions. Metal tanks are usually susceptible to rust and corrosion and plastic tanks are know to crack under pressure. In the past decade, Chrysler Sebring has incorporated a multitude of type and capacity of Fuel Tanks such as the high capacity military grade polymer tanks, which increase the driving distance. These tanks are designed in such a manner that they do not cause fuel to move or form air pockets within the tank and hence do not produce much noise and they help enhance the efficiency of the vehicle in use. As for all Chrysler Sebring Fuel Tanks regardless their type, the tanks are checked for leaks at the factory, they are supplied with the components necessary for their stable functioning.

Chrysler Sebring Fuel Tank Parts and Q&A

Fuel Tank
68159522AA
Q: How to Maintain and Repair a Fuel Tank on Chrysler Sebring?
A:
Before you service or repair the fuel tank unit, relieve the fuel pressure and then take the fuel tank out, because the fuel reservoir in the Fuel Pump module won't empty when you drain the tank and spillage might occur when you take off the module. Open the fuel line when you push in the quick connect retainers with your thumb and forefinger on the fuel pump module. After that, press the lock on the electrical connector down, then gently pull the electrical connector away from the module. Make a mark on the vehicle where the fuel pump will be mounted. Attach tool 9340 to the module lock ring and spin it to remove the ring, then pull the fuel pump and O-ring seal from the tank, getting rid of the old seal afterward.
Fuel Tank
5093453AE
Q: How to Maintain and Fix a Fuel Tank on Chrysler Sebring?
A:
Before servicing or repairing the fuel tank unit, start by removing the fuel pressure, then take out the fuel tank, keeping in mind that the fuel reservoir of the Fuel Pump module will spill during removal. Start by depressing the quick connect retainers on the fuel line, then simply slide the lock on the fuel pump module's electrical connector to unlock it. Press down on the connector retainer and pull the connector out from the module to release the electrical connection and put a mark near the fuel pump. Punch and hammer the lock ring holding the fuel pump module off with a brass punch, pull the old fuel pump and seal from the tank and throw away the old seal. After cleaning the seal area, add a new seal into the tank, fit the pump into place inside and cover the pump with the lockring which you then tighten with a brass punch and a hammer. Reattach the electrical wiring and fuel line to the pump, place the fuel tank beneath the car, drop the vehicle, link the Battery Cable and fill up the fuel tank. Let the DRB III(R) scan tool pressurize the fuel system and check if any leaks are found.