How to Service a Hazard Warning Switch on Chrysler Sebring?

Before anything else, detach and isolate the remote cable linking the battery negative. After that, take off the upper covering of the steering column. After that, unwind the screws holding the multifunction switch and pull out the wires, raising the switch until it comes off. To install the switch, put it on the steering column and retrofit the retaining screws, tightening them until the force is 2.3 Nm or 20 in. lbs. When that's done, set all the steering shrouds and screws back in place, then tighten the cover retaining screws to 2 Nm (17 in. lbs.) torque. After that, link the black battery cable back to the vehicle.

OEM Chrysler Sebring Hazard Warning Switch

Hazard Warning Emergency Light Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Hazard Warning Switches found

View related parts
Chrysler Sebring Hazard Switch Part Number: MR320634
Product Specifications
- Other Name: Switch - Hazard Warning; Hazard Warning Switch; Hazard Flasher Switch; Switch Hazard Warning
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2005 Chrysler Sebring | Base, LX, LXi, Limited | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS
View related parts
Chrysler Sebring Hazard Switch Part Number: 68031123AB
Product Specifications
- Other Name: Switch - Instrument Panel; Hazard Flasher Switch; Switch
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2009 Chrysler Sebring | LX, Limited, Touring | 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS

Chrysler Sebring Hazard Warning Switch

Choose OEM Hazard Warning Switch that meet Chrysler factory standards. Chrysler designs and tests every component for precision and durability. Each Hazard Warning Switch follows strict manufacturing steps to lock in quality and fit. If your Chrysler Sebring matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Sebring parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

Chrysler Sebring Hazard Warning Switch Parts and Q&A

Hazard Switch
MR320634
Q: How to Service a Hazard Warning Switch on Chrysler Sebring?
A:
Before anything else, detach and isolate the remote cable linking the battery negative. After that, take off the upper covering of the steering column. After that, unwind the screws holding the multifunction switch and pull out the wires, raising the switch until it comes off. To install the switch, put it on the steering column and retrofit the retaining screws, tightening them until the force is 2.3 Nm or 20 in. lbs. When that's done, set all the steering shrouds and screws back in place, then tighten the cover retaining screws to 2 Nm (17 in. lbs.) torque. After that, link the black Battery Cable back to the vehicle.