How to Maintain a Knock Sensor on a 4-Cylinder Engine on Chrysler Sebring?

Before serving the knock sensor on a 4-cylinder engine, disconnect its electrical connection, located in the side of the cylinder block. Attach a crow foot socket and pull the knock sensor to take it out. To install, insert the new knock sensor in the same space in front of the starter, then tighten it to 10 N.m (7 ft. lbs.). Failure to tighten properly can negatively affect the vehicle's spark control. After that, line up the electrical connector and unfasten it from the knock sensor.

How to Service a Knock Sensor Positioned Beneath the Intake Manifold on Chrysler Sebring?

Before handling the knock sensor which is located in the cylinder block under the manifold, first disconnect the manifold plenum and remove the passenger side head. Take out the knock sensor by unplugging the connector and using a crows foot socket. Make sure to tighten the installed knock sensor into the cylinder block with 10 Nm (7 ft. lbs.) of force to stop it from affecting spark control. Reach in behind and place the passenger side cylinder head, secure the electrical connector to the knock sensor and finish by installing the intake manifold plenum.

OEM Chrysler Sebring Knock Sensor

Engine Knock Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 Knock Sensors found

View related parts
Chrysler Sebring Knock Sensor Part Number: 4606093AF
$119.31 MSRP: $182.00
You Save: $62.69 (35%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Knock; Ignition Knock (Detonation) Sensor; Throttle Sensor; Sensor Knock
- Replaces: 4606093AC, 4606093AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2005 Chrysler Sebring | GTC, Limited, Touring | 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS
View related parts
Chrysler Sebring Knock Sensor Part Number: 4606093AD
$103.54 MSRP: $157.00
You Save: $53.46 (35%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Detonation; Ignition Knock (Detonation) Sensor; Sensor; Sensor Detonation
- Replaces: 4606093
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2004-2010 Chrysler Sebring | Base, GTC, LX, Limited, TSi, Touring | 2.7L V6, 3.5L V6, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS
View related parts
Chrysler Sebring Knock Sensor Part Number: 5033316AB
$128.23 MSRP: $194.00
You Save: $65.77 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Knock; Ignition Knock (Detonation) Sensor; MAP Sensor; Sensor Knock
- Replaces: 5033316AA, 56028563AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2003-2010 Chrysler Sebring | 2.4L L4
View related parts
Chrysler Sebring Knock Sensor Part Number: MD304933
Product Specifications
- Other Name: Sensor - Knock; Ignition Knock (Detonation) Sensor; Sensor Knock
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2005 Chrysler Sebring | Base, LX | 4 Cyl 2.4 L GAS
View related parts
Chrysler Sebring Knock Sensor Part Number: MD159216
Product Specifications
- Other Name: Sensor - Knock; Ignition Knock (Detonation) Sensor; Sensor, Electric Control Knock Stamped# F1T15571; Sensor, Electric Control Knock (Detonation); Sensor Knock
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2005 Chrysler Sebring | LX, LXi, Limited | 6 Cyl 3.0 L GAS
View related parts
Chrysler Sebring Knock Sensor Part Number: 4557667
Product Specifications
- Other Name: Sensor - Knock; Ignition Knock (Detonation) Sensor; Sensor, Knock, 3.3-3.8 Engine; Sensor, Knock; Sensor Knock
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2002, 1995-1999 Chrysler Sebring | LX, LXi | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS, 6 Cyl 2.5 L GAS
View related parts
Chrysler Sebring Knock Sensor Part Number: 4557667AB
Product Specifications
- Other Name: Sensor - Detonation; Sensor Detonation
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2004 Chrysler Sebring | Base, GTC, LX, LXi, Limited, Touring | 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS

Chrysler Sebring Knock Sensor

Choose OEM Knock Sensor that meet Chrysler factory standards. Chrysler designs and tests every component for precision and durability. Each Knock Sensor follows strict manufacturing steps to lock in quality and fit. If your Chrysler Sebring matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Sebring parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

The Knock Sensor is located in Chrysler Sebring automobiles and its main function is to detect engine knock, this takes place when the ignition timing is off. We send signals to to PCM so that PCM can advance the ignition timing and reduce the amount of detonation. Usually, Chrysler sebring has piezoelectric knock sensors that transform vibration into an electrical signal and therefore, have constant pressures peaks indicative of the knocking activity. In the recent past, Chrysler sebring has been able to incorporate state of the art knock sensor technology that has ability to alter ignition timing for individual cylinders and also determine boost pressure based on the design of the particular engine. These systems enable the engines to run as close to the 'knock limit' as possible, improvements performance, and predict the knock with lower octane fuels with less danger of harm developing. The development of Knock Sensor in Chrysler Sebring automobile is emblematic of the logic inherent in preserving the durability of an engine when driven under different circumstances.

Chrysler Sebring Knock Sensor Parts and Q&A

Knock Sensor
4606093AD
Q: How to Maintain a Knock Sensor on a 4-Cylinder Engine on Chrysler Sebring?
A:
Before serving the knock sensor on a 4-cylinder engine, disconnect its electrical connection, located in the side of the cylinder block. Attach a crow foot socket and pull the knock sensor to take it out. To install, insert the new knock sensor in the same space in front of the starter, then tighten it to 10 N.m (7 ft. lbs.). Failure to tighten properly can negatively affect the vehicle's spark control. After that, line up the electrical connector and unfasten it from the knock sensor.
Knock Sensor
4557667
Q: How to Service a Knock Sensor Positioned Beneath the Intake Manifold on Chrysler Sebring?
A:
Before handling the knock sensor which is located in the cylinder block under the manifold, first disconnect the manifold plenum and remove the passenger side head. Take out the knock sensor by unplugging the connector and using a crows foot socket. Make sure to tighten the installed knock sensor into the cylinder block with 10 Nm (7 ft. lbs.) of force to stop it from affecting spark control. Reach in behind and place the passenger side cylinder head, secure the electrical connector to the knock sensor and finish by installing the intake manifold plenum.