How to Detach the Muffler from the Exhaust System on Chrysler Sebring?

Before disconnecting the muffler and resonator assembly, wait until the exhaust system cools, as these parts work at extremely high temperatures around the catalytic converter. Since the band clamps are attached with spot-welds, the weld must be removed from the pipe if one of the clamps becomes worn and needs to be replaced. Only use authentic replacement parts or parts that are the same, when you make replacements. First, hoist up the vehicle and put some penetrating oil on band clamp 4. After that, take off the band clamp from strap 4 and clear out the ground strap on the muffler. Hand removal is the only safe way to take off the rubber isolators; using tools can harm them. You can use soapy water or silicone-based lubricant spray to make isolator installation or removal easier, yet it's best to avoid using any petroleum-based products. Following that, detach support isolators 1 from the muffler supports and unmount the muffler/resonator assembly 2.

How to Install a Muffler for Optimal Performance on Chrysler Sebring?

Set the muffler and resonator assembly on top of the catalytic converter pipe and use support isolators before installation. Also check below the vehicle to ensure there is room for all the underbody components and that the support isolators are equal in their loads. Torque the clamp on band 4 starting at 4 Nm (3 ft. lbs.), then continue up to 29 Nm (25 ft. lbs.) and tie the ground strap to the muffler. When the vehicle is lowered, turn on the engine and check the exhaust system for leaks, fixing anything that's broken. It's also important to ensure that there isn't any contact between the exhaust system and the body panels and take action accordingly.

OEM Chrysler Sebring Muffler

Exhaust Muffler

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

19 Mufflers found

View related parts
Chrysler Sebring Muffler & Pipe Part Number: 4764606AF
$165.58 MSRP: $475.00
You Save: $309.42 (66%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Muffler - Exhaust; Direct-Fit Exhaust Assembly; Exhaust System Kit; Resonator; Muffler W/Tpipe; Muffler; Muffler And Tailpipe Exhaust
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006, 2003-2004 Chrysler Sebring | Base, LX, LXi, Limited, TSi, Touring | 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.0 L GAS
View related parts
Chrysler Sebring Muffler & Pipe Part Number: 4578211AB
$253.15 MSRP: $484.00
You Save: $230.85 (48%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Muffler - Exhaust; Exhaust Muffler; Exhaust Muffler Assembly; Exhaust Pipe; Resonator; Muffler; Muffler And Tailpipe Exhaust
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2002-2006 Chrysler Sebring | Base, GTC, LX, LXi, Limited, Touring | 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS
View related parts
Chrysler Sebring Muffler & Pipe Part Number: 4764842AF
$263.46 MSRP: $504.00
You Save: $240.54 (48%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Muffler - Exhaust; Direct-Fit Exhaust Assembly; Exhaust System Kit; Resonator; Muffler; Muffler And Tailpipe Exhaust
- Replaces: 4764842AC, 4764842AE, 4764842AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006 Chrysler Sebring
- 2001-2004 Chrysler Sebring | 2.7L V6
View related parts
Chrysler Sebring Muffler & Pipe Part Number: 4764604AC
$80.07 MSRP: $145.00
You Save: $64.93 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Muffler - Exhaust; Exhaust Muffler; Direct-Fit Exhaust; Exhaust System Kit; Exhaust Pipe; Resonator; Muffler W/Tpipe; Muffler; Muffler And Tailpipe Exhaust
- Replaces: 4764604AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2006 Chrysler Sebring | Base, LX | 2.4L L4, 4 Cyl 2.4 L GAS
View related parts
Chrysler Sebring Muffler W/Tpipe Part Number: MR968605
$117.22 MSRP: $148.60
You Save: $31.38 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Muffler - Exhaust Main; Exhaust Muffler; Exhaust Pipe; Resonator; Muffler; Muffler Exhaust Main
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2003-2005 Chrysler Sebring | LXi, Limited | 6 Cyl 3.0 L GAS
View related parts
Chrysler Sebring Muffler & Pipe Part Number: MR968603
$121.12 MSRP: $153.55
You Save: $32.43 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Muffler - Exhaust Main; Exhaust Muffler; Exhaust Pipe; Resonator; Muffler; Muffler Exhaust Main
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2003-2005 Chrysler Sebring | Base, LX | 4 Cyl 2.4 L GAS
View related parts
Chrysler Sebring Muffler W/Tpipe Part Number: MR450428
Product Specifications
- Other Name: Muffler; Exhaust Muffler; Exhaust Pipe; Resonator; Muffler Exhaust
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2002 Chrysler Sebring | LX, LXi | 6 Cyl 3.0 L GAS
View related parts
Chrysler Sebring Muffler & Pipe Part Number: 5278217
Product Specifications
- Other Name: Pipe Exhaust; Direct-Fit Exhaust; Exhaust System Kit; Exhaust Pipe; Resonator; Muffler; Pipe Assembly, Tail Pipe, W/Muffler
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1996-1998 Chrysler Sebring | JX, JXi | 4 Cyl 2.4 L GAS
View related parts
Chrysler Sebring Muffler & Pipe Part Number: 5278136
Product Specifications
- Other Name: Muffler - Exhaust; Direct-Fit Exhaust; Exhaust System Kit; Exhaust Pipe; Resonator; Muffler; Pipe Assembly, Tail Pipe, W/Muffler; Muffler And Tailpipe Exhaust
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1996-2000 Chrysler Sebring | JX, JXi | 6 Cyl 2.5 L GAS
View related parts
Chrysler Sebring Muffler & Pipe Part Number: 5273758AA
Product Specifications
- Other Name: Muffler - Exhaust; Exhaust Pipe; Resonator; Muffler W/Tpipe; Muffler; Muffler And Tailpipe Exhaust
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006 Chrysler Sebring | Limited, TSi, Touring | 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS
View related parts
Chrysler Sebring Muffler & Pipe Part Number: 4578330AA
Product Specifications
- Other Name: Muffler - Exhaust; Direct-Fit Exhaust Assembly; Exhaust System Kit; Resonator; Muffler W/Tpipe; Muffler; Muffler And Tailpipe Exhaust
- Replaces: 4764606AB, 4764606AC, 4764606AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2006 Chrysler Sebring | Base, GTC, LX, LXi, Limited, TSi, Touring | 2.7L V6, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.0 L GAS
View related parts
Chrysler Sebring Muffler W/Tpipe Part Number: 4764840AC
Product Specifications
- Other Name: Muffler - Exhaust; Exhaust Muffler; Exhaust Muffler Assembly; Direct-Fit Exhaust; Exhaust System Kit; Exhaust Pipe; Muffler And Tailpipe Exhaust; Muffler
- Replaces: 4764840AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2002-2006 Chrysler Sebring | Base, GTC, LX, LXi, Limited, Touring | 2.4L L4, 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS
View related parts
Chrysler Sebring Muffler & Tail Pipe Part Number: 5171096AI
Product Specifications
- Other Name: Exhaust; Exhaust Muffler; Exhaust Pipe; Muffler; Muffler W/Tpipe
- Replaces: 5171096AE, 5171096AG, 5171096AD, 5171096AH, 5171096AF
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2010 Chrysler Sebring | LX, Limited, Touring | 2.7L V6, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS
View related parts
Chrysler Sebring Muffler & Tail Pipe Part Number: 5085559AK
Product Specifications
- Other Name: Exhaust; Exhaust Muffler; Exhaust Pipe; Muffler; Muffler W/Tpipe
- Replaces: 5085559AG, 5085559AF, 5085559AD, 5085559AE, 5085559AI, 5085559AH
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2010 Chrysler Sebring | Base, LX, Touring | 2.7L V6, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS
View related parts
Chrysler Sebring Muffler & Pipe Part Number: 5085741AM
Product Specifications
- Other Name: Converter - Exhaust; Exhaust Muffler; Direct-Fit Exhaust; Exhaust System Kit; Exhaust Pipe; Muffler & Tail Pipe; Muffler W/Tpipe; Muffler And Tailpipe Exhaust; Muffler
- Replaces: 5085741AI, 5085741AG, 5085741AK, 5085741AE, 5085741AH, 5085741AJ, 5085741AL, 5085741AF
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2010 Chrysler Sebring | 2.4L L4
View related parts
Chrysler Sebring Muffler & Pipe Part Number: 5085556AL
Product Specifications
- Other Name: Exhaust Muffler and Pipe Assembly; Direct-Fit Exhaust System Kit; Resonator Assembly.; Muffler & Tail Pipe; Muffler W/Tpipe; Muffler And Tailpipe Exhaust; Muffler
- Replaces: 5085556AG, 5085556AH, 5085556AF, 5085556AI, 5085556AK, 5085556AJ, 5085556AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2010 Chrysler Sebring | Base, LX, Limited, Touring | 2.4L L4, 4 Cyl 2.4 L GAS
View related parts
Chrysler Sebring Muffler & Tail Pipe Part Number: 5085482AN
Product Specifications
- Other Name: Muffler - Exhaust; Exhaust Muffler; Exhaust Pipe; Muffler; Muffler W/Tpipe
- Replaces: 5085482AM, 5085482AH, 5085482AJ, 5085482AK, 5085482AL, 5085482AI
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2010 Chrysler Sebring | Limited | 3.5L V6, 6 Cyl 3.5 L GAS
View related parts
Chrysler Sebring Muffler & Tail Pipe Part Number: 5171098AK
Product Specifications
- Other Name: Muffler - Exhaust; Exhaust Muffler; Exhaust Pipe; Muffler; Muffler W/Tpipe
- Replaces: 5171098AI, 5171098AH, 5171098AJ, 5171098AG
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2010 Chrysler Sebring | Limited | 3.5L V6, 6 Cyl 3.5 L GAS
View related parts
Chrysler Sebring Muffler & Tail Pipe Part Number: 5171095AM
Product Specifications
- Other Name: Exhaust; Exhaust Muffler; Exhaust Muffler Assembly; Exhaust Pipe; Muffler W/Tpipe; Muffler And Tailpipe Exhaust; Muffler
- Replaces: 5171095AE, 5171095AK, 5171095AI, 5171095AL, 5171095AH, 5171095AF, 5171095AG
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2010 Chrysler Sebring | LX, Limited, Touring | 2.4L L4, 4 Cyl 2.4 L GAS

Chrysler Sebring Muffler

Choose OEM Muffler that meet Chrysler factory standards. Chrysler designs and tests every component for precision and durability. Each Muffler follows strict manufacturing steps to lock in quality and fit. If your Chrysler Sebring matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Sebring parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

The Chrysler Sebring Muffler is a vital part of the exhaust system of Chrysler Sebring, of which the models are famous for their durability and high quality. Intending to vent dangerous exhaust fumes away from passengers' compartment also at the same time confining as much engine noise as possible, the Muffler works like a secret passage of tubes and shells aimed to neutralize the noise sound waves so that they cannot penetrate the cabin. Chrysler has manufactured different kinds of mufflers for the sebring, and there are mufflers for this car that are direct fit whose installation is quick since it retains the original tone and quality while others are universal, thereby may need alterations. The factors such as Stainless steel and aluminized steel are proving to be very durable and therefore the Chrysler Sebring Muffler can be regarded as a durability oriented product. In addition to its effect of smoothing the exhaust flow and improving the vehicle's efficiency, this Muffler has an equally important part of the function of meeting the prescriptive noise and emission standards thus making it safer. The Chrysler Sebring Muffler can be regarded as the car part that has some peculiarities in the contemporary auto market due to the availability of specific performance-oriented designs of the part. Apparently, this Muffler enjoys compatibility with different models of Sebring, which reveals the dedication of Chrysler to providing the clients with only the optimal quality coupled with innovation that makes every ride in a Sebring car not only delightful, but also safe. In sum, the Chrysler Sebring Muffler plays an important role of the vehicle to explain it as a reliable and high-performance car in the current and challenging car market.

Chrysler Sebring Muffler Parts and Q&A

Muffler & Tail Pipe
5085559AK
Q: How to Detach the Muffler from the Exhaust System on Chrysler Sebring?
A:
Before disconnecting the muffler and resonator assembly, wait until the exhaust system cools, as these parts work at extremely high temperatures around the Catalytic Converter. Since the band clamps are attached with spot-welds, the weld must be removed from the pipe if one of the clamps becomes worn and needs to be replaced. Only use authentic replacement parts or parts that are the same, when you make replacements. First, hoist up the vehicle and put some penetrating oil on band clamp 4. After that, take off the band clamp from strap 4 and clear out the ground strap on the muffler. Hand removal is the only safe way to take off the rubber isolators; using tools can harm them. You can use soapy water or silicone-based lubricant spray to make isolator installation or removal easier, yet it's best to avoid using any petroleum-based products. Following that, detach support isolators 1 from the muffler supports and unmount the muffler/resonator assembly 2.
Muffler & Tail Pipe
5085482AN
Q: How to Install a Muffler for Optimal Performance on Chrysler Sebring?
A:
Set the muffler and resonator assembly on top of the catalytic converter pipe and use support isolators before installation. Also check below the vehicle to ensure there is room for all the underbody components and that the support isolators are equal in their loads. Torque the clamp on band 4 starting at 4 Nm (3 ft. lbs.), then continue up to 29 Nm (25 ft. lbs.) and tie the ground strap to the muffler. When the vehicle is lowered, turn on the engine and check the exhaust system for leaks, fixing anything that's broken. It's also important to ensure that there isn't any contact between the exhaust system and the body panels and take action accordingly.