How to Service a Power Steering Reservoir on Chrysler Sebring?

Use a siphon pump to first empty as much fluid as you can from the power steering reservoir. Lift the reservoir off the guide and remove the screw that was securing it to the bottle after. Lift the hose clamps holding the power steering fluid pipes in place, put the return hose into the reservoir and remove them all and next take the reservoir out of the vehicle. While installing, join the return and supply hoses to the reservoir with the clamps seated just past the fitting's upset area. Replace the reservoir in the guide on the bottle, then attach the mounting screw and tighten it to 6 Nm (53 inch lbs.). After filling the fluid reservoir, turn on the engine and let it run for just a bit. Adjust the fluid again if necessary until the fluid level stays the same after running the engine. Should it be required, carry out the Power Steering Pump Initial Operation routine and see if there are any leaks.

How to Maintain and Fix a Power Steering Reservoir on Chrysler Sebring?

You should start by taking away the engine appearance cover to service and repair the power steering reservoir. After that, remove the screws or bolts that hold the coolant bottle in place, then move the bottle farther away from the power steering reservoir but keep the fluid lines connected. Drain out as much power steering fluid as you can from the reservoir. After that, take off the hose clamp holding the return hose in place at the fitting and slide the hose off the end of the fluid reservoir. After that, remove the pump supply hose's clamp and pull it off the reservoir fitting. When that's done, use the mounting screw to release the reservoir and lift it out from the cover. Remove the plastic shield from the reservoir.

OEM Chrysler Sebring Power Steering Reservoir

Power Steering Fluid Reservoir Tank

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 Power Steering Reservoirs found

View related parts
Chrysler Sebring Reservoir Assembly Part Number: MN101235
$46.66 MSRP: $93.90
You Save: $47.24 (51%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Reservoir - Power Steering Pump; Power Steering Reservoir; Reservoir; Reservoir Power Steering Pump
- Replaces: MN184023
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2005 Chrysler Sebring | Base, LX, LXi, Limited | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS
View related parts
Chrysler Sebring Reservoir Part Number: 4764092AB
$31.22 MSRP: $46.45
You Save: $15.23 (33%)
ADD TO CART
Product Specifications
- Other Name: Reservoir - Power Steering Pump; Power Steering Reservoir; Reservoir Power Steering Pump
- Replaces: 4764092
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1996-2000 Chrysler Sebring | JX, JXi | 2.0L L4, 2.4L L4, 2.5L V6, 4 Cyl 2.4 L GAS, 6 Cyl 2.5 L GAS
View related parts
Chrysler Sebring Power Steering Pump Reservoir Part Number: 5105338AB
$48.79 MSRP: $71.60
You Save: $22.81 (32%)
ADD TO CART
Product Specifications
- Other Name: Reservoir - Power Steering Fluid; Power Steering Reservoir; Reservoir; Reservoir Power Steering Fluid; Reservoir Power Steering Pump
- Replaces: 5105338AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2008 Chrysler Sebring | Base, LX, Limited, Touring | 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS
View related parts
Chrysler Sebring Power Steering Pump Reservoir Part Number: 5151028AB
$34.09 MSRP: $50.15
You Save: $16.06 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Reservoir - Power Steering Pump; Power Steering Reservoir; Reservoir; Reservoir Kit Power Steering Pump
- Replaces: 5151028AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2009-2010 Chrysler Sebring | LX, Touring | 2.4L L4, 2.7L V6, 3.5L V6, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS
View related parts
Chrysler Sebring Reservoir Hose Part Number: 4764418AC
$48.12 MSRP: $67.90
You Save: $19.78 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Reservoir - Power Steering Pump; Power Steering Reservoir; Reservoir
- Replaces: 4764418AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2006 Chrysler Sebring | Base, GTC, LX, LXi, Limited, TSi, Touring | 2.4L L4, 2.7L V6, 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.0 L GAS
View related parts
Chrysler Sebring Reservoir Part Number: MB910670
Product Specifications
- Other Name: Reservoir - Power Steering Pump; Power Steering Reservoir; Reservoir Assembly, Power Steering Oil; Reservoir Power Steering Pump
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1995-2000 Chrysler Sebring | LX, LXi | 4 Cyl 2.0 L GAS, 6 Cyl 2.5 L GAS
View related parts
Chrysler Sebring Reservoir Part Number: 4766963AA
Product Specifications
- Other Name: Reservoir - Power Steering Fluid; Power Steering Reservoir
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2009-2010 Chrysler Sebring | LX, Limited, Touring | 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS

Chrysler Sebring Power Steering Reservoir

Choose OEM Power Steering Reservoir that meet Chrysler factory standards. Chrysler designs and tests every component for precision and durability. Each Power Steering Reservoir follows strict manufacturing steps to lock in quality and fit. If your Chrysler Sebring matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Sebring parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

Chrysler Sebring Power Steering Reservoir is an important component of power steering system of Chrysler Sebring vehicles for prime performing and reliable manner. This reservoir helps to provide the correct pressure of the power steering fluid and the power steering system is most effective as compared to other power steering mechanisms. Located in a Chrysler Sebring, the Chrysler Sebring Power Steering Reservoir assists in the flow of fluids and operations pressure, which renders a beneficial and positive, impact in relation to multifaceted performance and safety. This reservoir does fit by being compatible with different models of the Sebring cars but it is tailored for each model to address the varied demands of the series so that drivers are guaranteed to get the prime from whichever model they get behind the wheel of. Praising the reliability of this particular OEM part, Chrysler, it is high time to focus on its construction as well as the engineering that went behind the creation of the Power Steering Reservoir. Also, the reservoir is commonly sold separately or in form of replacement kits for easy access for servicing and repairs. Additional, versatile, and adaptability with modifications such as it falls to different up trims of Sebring and compatible with the new revolutionizing technologies on automotive would make the car more attractive. In conclusion, the Chrysler Sebring Power Steering Reservoir is more than just a good Performing component; it is a symbol of the Chrysler focus on quality and perfection and therefore it should be seen as a vital tool to any owner of the Chrysler Sebring who wishes to keep the optical and mechanical appeal and satisfaction from the car at an optimum.

Chrysler Sebring Power Steering Reservoir Parts and Q&A

Reservoir Assembly
MN101235
Q: How to Service a Power Steering Reservoir on Chrysler Sebring?
A:
Use a siphon pump to first empty as much fluid as you can from the power steering reservoir. Lift the reservoir off the guide and remove the screw that was securing it to the bottle after. Lift the hose clamps holding the power steering fluid pipes in place, put the return hose into the reservoir and remove them all and next take the reservoir out of the vehicle. While installing, join the return and supply hoses to the reservoir with the clamps seated just past the fitting's upset area. Replace the reservoir in the guide on the bottle, then attach the mounting screw and tighten it to 6 Nm (53 inch lbs.). After filling the fluid reservoir, turn on the engine and let it run for just a bit. Adjust the fluid again if necessary until the fluid level stays the same after running the engine. Should it be required, carry out the Power Steering Pump Initial Operation routine and see if there are any leaks.
Power Steering Pump Reservoir
5105338AB
Q: How to Maintain and Fix a Power Steering Reservoir on Chrysler Sebring?
A:
You should start by taking away the engine appearance cover to service and repair the power steering reservoir. After that, remove the screws or bolts that hold the coolant bottle in place, then move the bottle farther away from the power steering reservoir but keep the fluid lines connected. Drain out as much power steering fluid as you can from the reservoir. After that, take off the hose clamp holding the return hose in place at the fitting and slide the hose off the end of the fluid reservoir. After that, remove the pump supply hose's clamp and pull it off the reservoir fitting. When that's done, use the mounting screw to release the reservoir and lift it out from the cover. Remove the plastic shield from the reservoir.