How to Service and Repair a Lash Adjuster on Chrysler Town & Country?

For lifter and lash adjuster service, begin by detaching the cylinder head(s) and removing the yoke retainer and aligning yokes. After that, get rid of the hydraulic lifters using Special Tool C-4129 or an alternative and mark them for correct installation if you plan to put the lifters back. Rub engine oil on the lifters, then align the lubrication holes facing the tops as you put each lifter in its bore. Set the hydraulic lifters where they originally were, so there is an upward path to the middle of the block for the lubrication and then install the lifter aligning yokes. Attach the yoke retainer and tighten the screws to 12 Nm (105 in. lbs.). Cylinder head replacement is the final step: set the engine back up and ensure it is at its proper operating temperature, but don't let the engine run above fast idle until all hydraulic lifters are quiet and filled with oil.

How to Properly Install a Lash Adjuster on Chrysler Town & Country?

To put in lash adjusters, first add engine oil to them, so that the lubrication hole is above. When installing, put the adjusters into their former slots with the hole toward the center of the block. Bring the yokes together and then insert the yoke retainer, tightening the screws to 12 Nm (105 in. lbs.). As soon as the adjusters have been placed, put the cylinder heads in. Start the motor and make sure it reaches regular operating temperature before operating the engine above fast idle or the engine could damage the valves.

OEM Chrysler Town & Country Lash Adjuster

Lash Adjuster Lifter

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Lash Adjusters found

View related parts
Chrysler Town & Country Valve Lifters Part Number: MD377560
$16.92 MSRP: $26.55
You Save: $9.63 (37%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Tappet - Valve Lash; Lash Adjuster; Valve Lash Adjuster; Adjuster; Adjuster Valve Lash
- Replaces: MD377561
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1990 Chrysler Town & Country | Base | 6 Cyl 3.0 L GAS
View related parts
Chrysler Town & Country Valve Lifters Part Number: 5184332AA
$12.76 MSRP: $18.40
You Save: $5.64 (31%)
ADD TO CART
Product Specifications
- Other Name: Tappet - Valve Lash; Engine Valve Lifter; Valve Lifter; Adjuster Valve Lash Exhaust; Adjuster Valve Lash Intake; Adjuster Valve Lash
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2016 Chrysler Town & Country | 30th Anniversary Edition, LX, Limited, Limited Platinum, S, Touring, Touring L | 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
Chrysler Town & Country Valve Lifters Part Number: 4621938AB
$41.37 MSRP: $58.60
You Save: $17.23 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Tappet - Valve; Valve Lifter
- Replaces: 4621938
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1992-2008 Chrysler Town & Country | Base, EL, EX, LX, LXi, Limited, SX, Touring | 3.3L V6, 3.8L V6, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS
View related parts
Chrysler Town & Country Valve Lifters Part Number: 4713439
Product Specifications
- Other Name: Tappet Package - Valve; Engine Valve Lifter; Valve Lifter; Tappet, Valve - Standard; Tappet Package Valve; Tappet, Valve Lifter; Tappet, Valve
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1990-1991 Chrysler Town & Country | Base | 6 Cyl 3.3 L GAS
View related parts
Chrysler Town & Country Valve Lifters Part Number: 4892465AB
Product Specifications
- Other Name: Tappet - Valve
- Replaces: 4892465AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2010 Chrysler Town & Country | LX, Touring, Touring Plus, Walter P. Chrysler Signature Series | 3.3L V6, 3.8L V6, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS

Chrysler Town & Country Lash Adjuster

Choose OEM Lash Adjuster that meet Chrysler factory standards. Chrysler designs and tests every component for precision and durability. Each Lash Adjuster follows strict manufacturing steps to lock in quality and fit. If your Chrysler Town & Country matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Town & Country parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

Chrysler Town & Country Lash Adjuster Parts and Q&A

Valve Lifters
4621938AB
Q: How to Service and Repair a Lash Adjuster on Chrysler Town & Country?
A:
For lifter and lash adjuster service, begin by detaching the cylinder head(s) and removing the yoke retainer and aligning yokes. After that, get rid of the hydraulic lifters using Special Tool C-4129 or an alternative and mark them for correct installation if you plan to put the lifters back. Rub engine oil on the lifters, then align the lubrication holes facing the tops as you put each lifter in its bore. Set the hydraulic lifters where they originally were, so there is an upward path to the middle of the block for the lubrication and then install the lifter aligning yokes. Attach the yoke retainer and tighten the screws to 12 Nm (105 in. lbs.). Cylinder head replacement is the final step: set the engine back up and ensure it is at its proper operating temperature, but don't let the engine run above fast idle until all hydraulic lifters are quiet and filled with oil.
Valve Lifters
4892465AB
Q: How to Properly Install a Lash Adjuster on Chrysler Town & Country?
A:
To put in lash adjusters, first add engine oil to them, so that the lubrication hole is above. When installing, put the adjusters into their former slots with the hole toward the center of the block. Bring the yokes together and then insert the yoke retainer, tightening the screws to 12 Nm (105 in. lbs.). As soon as the adjusters have been placed, put the cylinder heads in. Start the motor and make sure it reaches regular operating temperature before operating the engine above fast idle or the engine could damage the valves.