How to Install the Neutral Safety Switch on Chrysler Town & Country?

You should begin with the Transmission Range Sensor by replacing the old manual lever oil seal (2) and adding a new seal using the manual socket (3). After that, push the manual lever into the palm until it enters the TRS. Assemble the TRS/rooster comb onto the manual lever and place the lever all the way into the case. Improve the assembly of the TRS/rooster comb(1) by slotting and pin punching the roll pin (3). After that, add the set screw (1) to manual lever (2) and turn it until it reaches 1 Nm (10 in. lbs.). Gather the park rod assembly (2) and the TRS or rooster comb (1) and attach the rod assembly to the comb, then position the rod assembly into the guide assembly. Insert the end of the park pawl pin into the park pawl tube and connect the electrical connector. The last step is to put in the valve body.

How to Remove and Replace the Neutral Safety Switch on Chrysler Town & Country?

In order to take out the Transmission Position Switch/Sensor, begin by removing the valve body from the transaxle. After that, remove the fastening screw (3) holding the sensor (1) and lift the sensor out of the body. Take the TRS (1) loose from the manual shaft to remove it.

OEM Chrysler Town & Country Neutral Safety Switch

Transmission Neutral Safety Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Neutral Safety Switches found

View related parts
Chrysler Town & Country Neutral Safety Switch Part Number: 4659559AB
$154.09 MSRP: $230.00
You Save: $75.91 (33%)
ADD TO CART
Product Specifications
- Other Name: Sensor - Transmission Range; Range Sensor; Sensor Transmission Range
- Replaced by: 4659559AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1996-1997 Chrysler Town & Country | Base, LX, LXi, SX | 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS
View related parts
Chrysler Town & Country Stoplamp Switch Part Number: 68055955AA
$119.31 MSRP: $179.00
You Save: $59.69 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Transmission Range; Automatic Transmission Position Switch; Brake Light Switch; Range Sensor; Includes Neutral Safety Switch; Parking Brake Warning Switch.
- Replaces: 5078967AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2016 Chrysler Town & Country | 30th Anniversary Edition, LX, Limited, Limited Platinum, S, Touring, Touring L, Touring Plus, Walter P. Chrysler Signature Series | 3.3L V6, 3.8L V6, 4.0L V6, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L GAS
View related parts
Chrysler Town & Country Neutral Safety Switch Part Number: 4659676AC
$62.61 MSRP: $93.90
You Save: $31.29 (34%)
ADD TO CART
Product Specifications
- Other Name: Sensor - Transmission Range; Range Sensor; Parking Brake Warning Switch; Sensor Transmission Range
- Replaced by: 4659676AD
- Replaces: 4659676AB, 4659676
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2000-2010 Chrysler Town & Country | Base, EL, EX, LX, LXi, Limited, Touring | 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS
View related parts
Chrysler Town & Country Range Sensor Part Number: 4659559AC
$98.85 MSRP: $230.00
You Save: $131.15 (58%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Transmission Range; Sensor Transmission Range
- Replaces: 4659559AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1996-1999 Chrysler Town & Country | Base, LX, LXi, Limited, SX | 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS
View related parts
Chrysler Town & Country Neutral Safety Switch Part Number: 3747361AB
Product Specifications
- Other Name: Switch - Neutral Safety, Back Up; Range Sensor; Back-Up Switch
- Replaces: 3747361, P5007747, P5007747AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1990-2002 Chrysler Town & Country | 3.0L V6, 3.3L V6, 3.8L V6
- 1984-1988 Chrysler Town & Country
View related parts
Chrysler Town & Country Neutral Safety Switch, Black Part Number: 4671017
Product Specifications
- Other Name: Switch - Neutral Safety; Windshield Washer Switch; Back Up Light Switch; Brake Light Switch; Wiper Switch; Stoplamp Switch; Parking Brake Warning Switch; Back-Up Switch; Neutral Start Switch (Black)
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1991-1994 Chrysler Town & Country | Base | 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS

Chrysler Town & Country Neutral Safety Switch

Choose OEM Neutral Safety Switch that meet Chrysler factory standards. Chrysler designs and tests every component for precision and durability. Each Neutral Safety Switch follows strict manufacturing steps to lock in quality and fit. If your Chrysler Town & Country matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Town & Country parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

Chrysler Town & Country vehicles are fitted with a safety feature known as the Neutral Safety Switch since one cannot start the engine unless the transmission is in 'Neutral' or 'Park'. This mechanism is used to ensure that a vehicle does not have an unintended movement during the process of ignition, thus improving on the security of the car for the users. Year on year, different types of Neutral Safety Switches have been used in Town & Country models though without distinguishing between specific types. The main emphasis is therefore retained on the part played by the switch in the protection against accidental starting and this brings out the aspect of switch in the operation of the vehicle.

Chrysler Town & Country Neutral Safety Switch Parts and Q&A

Stoplamp Switch
68055955AA
Q: How to Install the Neutral Safety Switch on Chrysler Town & Country?
A:
You should begin with the Transmission Range Sensor by replacing the old manual lever oil seal (2) and adding a new seal using the manual socket (3). After that, push the manual lever into the palm until it enters the TRS. Assemble the TRS/rooster comb onto the manual lever and place the lever all the way into the case. Improve the assembly of the TRS/rooster comb(1) by slotting and pin punching the roll pin (3). After that, add the set screw (1) to manual lever (2) and turn it until it reaches 1 Nm (10 in. lbs.). Gather the park rod assembly (2) and the TRS or rooster comb (1) and attach the rod assembly to the comb, then position the rod assembly into the guide assembly. Insert the end of the park pawl pin into the park pawl tube and connect the electrical connector. The last step is to put in the Valve Body.
Neutral Safety Switch
4659676AC
Q: How to Remove and Replace the Neutral Safety Switch on Chrysler Town & Country?
A:
In order to take out the Transmission Position Switch/Sensor, begin by removing the Valve Body from the transaxle. After that, remove the fastening screw (3) holding the sensor (1) and lift the sensor out of the body. Take the TRS (1) loose from the manual shaft to remove it.