How to Remove an A/C System Valve Core on Dodge Avenger?

Before you can remove the core from the service port valve, make sure to remove the protective cap on the service port. After that, gather the refrigerant that is still in the system. Take the Schrader core tool and remove the valve core from the tire's service port. After you have sorted everything out, seal the opened service port with a plug or tape.

How to Install an A/C System Valve Core on Dodge Avenger?

Before you install the service port valve core, coat it with suitable refrigerant oil for the vehicle's A/C compressor. Remove either the tape or the plug from inside the service port (2). Be sure the valve core is inserted far enough in the A/C port so that sealing occurs and no damage is done, avoiding refrigerant loss during uncoupling charge adapters. Install and tighten the valve core onto the service port(s) using a Schrader-type valve core tool. Be sure not to start the engine until the vacuum pump is off and there is not a vacuum in the A/C system. Following installation, pull the refrigerant out of the system and then refill the system. When the work is done, replace the protective cap (1) to prevent contamination of the refrigerant system and remember to put it back after every service is finished.

OEM Dodge Avenger A/C System Valve Core

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 A/C System Valve Cores found

View related parts
Dodge Avenger Check Valve, Rear Part Number: 5003862AA
$4.62 MSRP: $6.95
You Save: $2.33 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Valve - A/C Line; High Side Adapter; Valve Core; Compressor Cut-Out; HVAC Switch; Trinary Switch; Pressure Switch; Fill Valve; Suction, Liquid, Discharge Line Valves; A/C Check Valve Core.
- Position: Rear
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2014 Dodge Avenger | Express, Heat, Lux, Mainstreet, R/T, SE, SXT, SXT Plus | 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX
View related parts
Dodge Avenger Check Valve Part Number: 5189373AA
$25.05 MSRP: $31.95
You Save: $6.90 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Valve - A/C Line; High & Low Side Charging Adapters; Service Valve Core.; Service Valve; Line Valve; Liquid Line Valve; Valve Core A/C Line
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008 Dodge Avenger | R/T, SE, SXT | 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS
View related parts
Dodge Avenger Check Valve Part Number: 68049091AA
$36.99 MSRP: $74.85
You Save: $37.86 (51%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Valve - A/C Line; High & Low Side Charging Adapters; Service Valve Core.; Fill Valve; Line Valve; Liquid Line Valve; Cap; Valve Core A/C Line
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2009-2014 Dodge Avenger | Express, Heat, Lux, Mainstreet, R/T, SE, SXT, SXT Plus | 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX

Dodge Avenger A/C System Valve Core

Choose OEM A/C System Valve Core that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each A/C System Valve Core follows strict manufacturing steps to lock in quality and fit. If your Dodge Avenger matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Avenger parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

A Dodge Avenger A/C System Valve Core has gained fame for its rock-solid performance especially when operating the air conditioning component across different Dodge Avenger vehicle models. The essential control function of this component shapes refrigerant movement thus preserving the A/C system's pressure and sealed conditions that enable maximum cooling performance. The Dodge Avenger A/C System Valve Core provides an efficient and safe solution for the system by linking different hoses and pipes between the compressor and condenser and evaporator units. This valve core suits multiple Dodge Avenger model types thus establishing itself as the favored option for car enthusiasts. The Dodge Avenger A/C System Valve Core dominates the automotive market because of its sturdy build and successful pressure maintenance capability that keeps the A/C system operational for longer periods. Because of its design the valve core creates a system that protects against refrigerant leaks thus providing enhanced safety during operation. The Dodge Avenger A/C System Valve Core operates as an essential component which enhances air conditioning system performance and reliability to deliver comfort in rides so the automaker model drivers experience smoother journey experiences. The car A/C System Valve Core achieves excellence while demonstrating efficient operation which means it stands strong in automotive industry standards.

Dodge Avenger A/C System Valve Core Parts and Q&A

Check Valve, Rear
5003862AA
Q: How to Remove an A/C System Valve Core on Dodge Avenger?
A:
Before you can remove the core from the service port valve, make sure to remove the protective cap on the service port. After that, gather the refrigerant that is still in the system. Take the Schrader core tool and remove the valve core from the tire's service port. After you have sorted everything out, seal the opened service port with a plug or tape.
Check Valve
68049091AA
Q: How to Install an A/C System Valve Core on Dodge Avenger?
A:
Before you install the service port valve core, coat it with suitable refrigerant oil for the vehicle's A/C compressor. Remove either the tape or the plug from inside the service port (2). Be sure the valve core is inserted far enough in the A/C port so that sealing occurs and no damage is done, avoiding refrigerant loss during uncoupling charge adapters. Install and tighten the valve core onto the service port(s) using a Schrader-type valve core tool. Be sure not to start the engine until the vacuum pump is off and there is not a vacuum in the A/C system. Following installation, pull the refrigerant out of the system and then refill the system. When the work is done, replace the protective cap (1) to prevent contamination of the refrigerant system and remember to put it back after every service is finished.