How to Safely Service a Blower Motor Resistor on Dodge Avenger?

Before starting to service the blower motor resistor, sit back for five minutes if the blower motor was used before so that the device has cooled. Unconnect and isolate the black battery terminal. Should the instructions require it, take out the push-pins and the silencer cover below the passenger side of the instrument panel. After that, take out the wire harness connector from the blower motor resistor. Using a screwdriver, loosen and remove the two screws holding the blower motor resistor in place and get rid of the resistor next.

How to install a Blower Motor Resistor on Dodge Avenger?

Put the blower motor resistor on the bottom of the HVAC housing. Screw the blower motor resistor securely into the HVAC housing with two screws 1.2 Nm (10 in. lbs.) tight. Link the back of the blower motor resistor to the terminals on the wire harness connector. Should you choose to, put in the silencer panel and two push-pins. After that, connect the negative battery cable.

OEM Dodge Avenger Blower Motor Resistor

Heater Blower Motor Resistor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Blower Motor Resistors found

View related parts
Dodge Avenger Control Module, Front Part Number: 68018105AA
$201.02 MSRP: $299.00
You Save: $97.98 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Module - Power; HVAC Blower Motor Control Module, Front; Blower Motor Resistor; Module Power Blower Motor with attaching and mounting screws.
- Position: Front
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2014 Dodge Avenger | Express, Heat, Lux, Mainstreet, R/T, SE, SXT, SXT Plus | 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX
View related parts
Dodge Avenger Resistor, Front Part Number: 5191344AA
$41.46 MSRP: $61.65
You Save: $20.19 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Resistor - Blower Motor; HVAC Blower Motor Resistor, Front; Resistor Blower Motor, includes attaching screws.
- Position: Front
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2014 Dodge Avenger | Express, Heat, Lux, Mainstreet, R/T, SE, SXT, SXT Plus | 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX
View related parts
Dodge Avenger Resistor Part Number: MR315836
Product Specifications
- Other Name: Resistor - Blower Motor; Blower Motor Resistor; Resistor Blower Motor
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1995-2000 Dodge Avenger | Base, ES | 4 Cyl 2.0 L GAS, 6 Cyl 2.5 L GAS

Dodge Avenger Blower Motor Resistor

Choose OEM Blower Motor Resistor that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each Blower Motor Resistor follows strict manufacturing steps to lock in quality and fit. If your Dodge Avenger matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Avenger parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

The Blower Motor Resistor in Dodge Avenger cars is basically used for controlling the speed of the blower motor. Its main task is to control the air stream of hot or cold air inside the cabin with an aim of making passengers comfortable. The Blower Motor Resistor regulates the blower motor in order to set an ideal interior climate by changing the motor's speed. Year after year, distinct type of Blower Motor Resistor may have been fitted in different models of Dodge Avenger with different specifications that are particularly designed to enhance performance and at the same time efficiency. In general, the differences between these types are not described in detailed, but the principle differences between them are in the construction and the way they regulate the airflow. In general, the Blower Motor Resistor is an imperative component of the automotive climate control system of the Dodge Avenger for making the automobile ride a comfortable one.

Dodge Avenger Blower Motor Resistor Parts and Q&A

Resistor, Front
5191344AA
Q: How to Safely Service a Blower Motor Resistor on Dodge Avenger?
A:
Before starting to service the Blower Motor resistor, sit back for five minutes if the blower motor was used before so that the device has cooled. Unconnect and isolate the black battery terminal. Should the instructions require it, take out the push-pins and the silencer cover below the passenger side of the instrument panel. After that, take out the wire harness connector from the blower motor resistor. Using a screwdriver, loosen and remove the two screws holding the blower motor resistor in place and get rid of the resistor next.
Control Module, Front
68018105AA
Q: How to install a Blower Motor Resistor on Dodge Avenger?
A:
Put the blower motor resistor on the bottom of the HVAC housing. Screw the blower motor resistor securely into the HVAC housing with two screws 1.2 Nm (10 in. lbs.) tight. Link the back of the blower motor resistor to the terminals on the wire harness connector. Should you choose to, put in the silencer panel and two push-pins. After that, connect the negative Battery Cable.