How to Service an Oil Pressure Switch on Dodge Avenger?

Before servicing the oil pressure sender, raise the vehicle. Following this, take out the electrical connector. Afterward, disconnect the oil pressure sensor with oil pressure socket C-4597 and throw it away.

How to Install an Oil Pressure Switch for a Fuel Pump on Dodge Avenger?

Reattach the oil pressure switch to the fuel pump only after confirming it hasn't been separately installed. Avoid tightening too much during installation, so you don't damage the tapered threads in the engine. Related socket C-4597 or any equivalent tool should be used to install the switch with a torque of 8 Nm. After that, connect the electrical connector to the oil pressure switch. Place the A/C compressor onto the mounts and install three bolts, tighten them to 25 Nm (18 ft. lbs.). Fix the accessory drive belt and then secure the splash shield onto the right side frame rail. Make sure to reattach the negative battery cable at the end.

OEM Dodge Avenger Oil Pressure Switch

Oil Pressure Sender Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Oil Pressure Switches found

View related parts
Dodge Avenger Oil Pressure Sensor Part Number: 5149062AB
$58.92 MSRP: $86.70
You Save: $27.78 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch - Oil Pressure; Engine Oil Pressure Switch; Oil Pressure Gauge Switch; Oil Pressure Switch; Pressure Switch; Pressure Sensor; Oil Pressure Sending Unit; Sending Unit
- Replaces: 5149062AA, 68060337AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2014 Dodge Avenger | Express, Heat, Lux, Mainstreet, R/T, SE, SXT, SXT Plus | 3.6L V6, 6 Cyl 3.6 L FLEX
View related parts
Dodge Avenger Oil Pressure Sending Unit Part Number: 68003360AA
$32.96 MSRP: $49.15
You Save: $16.19 (33%)
ADD TO CART
Product Specifications
- Other Name: Switch - Oil Pressure; Engine Oil Pressure Switch; Oil Pressure Light Switch; Switch Package Oil Pressure; Oil Pressure Switch
- Replaced by: 68003360AC
- Replaces: 5033317AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2014 Dodge Avenger | Express, Lux, Mainstreet, R/T, SE, SXT | 4 Cyl 2.4 L GAS
View related parts
Dodge Avenger Switch - Oil Pressure Part Number: 5149098AB
$40.91 MSRP: $55.60
You Save: $14.69 (27%)
ADD TO CART
Product Specifications
- Other Name: SWITCH-OIL PRESSURE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2010 Dodge Avenger | R/T, SE, SXT | 2.7L V6, 3.5L V6, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS
- 1995-1999 Dodge Avenger | 2.0L L4, 2.5L V6
View related parts
Dodge Avenger Oil Pressure Switch Part Number: 1258A002
Product Specifications
- Other Name: Switch - Engine Oil Pressure; Engine Oil Pressure Switch; Oil Pressure Sending Unit; Timing Gear Set
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1995-1999 Dodge Avenger | Base, ES | 6 Cyl 2.5 L GAS
View related parts
Dodge Avenger Oil Pressure Switch Part Number: 5269558AB
Product Specifications
- Other Name: Sensor - Oil Pressure; Oil Pressure Sending Unit
- Replaces: 5269558
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1995-1999 Dodge Avenger | Base, ES | 2.0L L4, 2.5L V6, 4 Cyl 2.0 L GAS

Dodge Avenger Oil Pressure Switch

Choose OEM Oil Pressure Switch that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each Oil Pressure Switch follows strict manufacturing steps to lock in quality and fit. If your Dodge Avenger matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Avenger parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

Oil Pressure Switch as one of the important elements that is the driving force behind the stability and efficiency of the Dodge Avenger models. This switch is used to check the oil pressure and to indicate any changes in pressure that may require a mechanic's attention. Even though it indicates only high oil pressure, the Oil Pressure Switch aids in protection of the internal elements of the engine thus improving the efficiency and reliability of the car. It fits and works with Dodge Avenger series; this guarantees that each model of Avenger has the correct engine performance and durability. Among the characteristics of the Dodge Avenger, the power and economy are noteworthy; therefore, the Oil Pressure Switch, designed for different configurations, including the 2.0L four-cylinder and the 2.5L V6, is crucial to this model. One particularly, the Oil Pressure Switch has had an added technology that ensures quick and accurate reading of the pressures within a limited time; this makes the avenger oil pressure switch enjoy a competitive edge in the automotive market. The vehicle boasts of a strong structure and a efficient one which makes the Dodge Avenger to be classified as a sound mid-size sedan. As we know that the safety measures and performance both are integrated and the Oil Pressure Switch plays a great role to keep the reliability of the engine and the safety features also satisfy the driving experience.

Dodge Avenger Oil Pressure Switch Parts and Q&A

Switch - Oil Pressure
5149098AB
Q: How to Service an Oil Pressure Switch on Dodge Avenger?
A:
Before servicing the oil pressure sender, raise the vehicle. Following this, take out the electrical connector. Afterward, disconnect the oil pressure sensor with oil pressure socket C-4597 and throw it away.
Oil Pressure Sending Unit
68003360AA
Q: How to Install an Oil Pressure Switch for a Fuel Pump on Dodge Avenger?
A:
Reattach the oil pressure switch to the Fuel Pump only after confirming it hasn't been separately installed. Avoid tightening too much during installation, so you don't damage the tapered threads in the engine. Related socket C-4597 or any equivalent tool should be used to install the switch with a torque of 8 Nm. After that, connect the electrical connector to the oil pressure switch. Place the A/C compressor onto the mounts and install three bolts, tighten them to 25 Nm (18 ft. lbs.). Fix the accessory Drive Belt and then secure the splash shield onto the right side frame rail. Make sure to reattach the negative Battery Cable at the end.