How to Service and Repair a Front Engine Mount on Dodge Caliber?

Prime by raising the vehicle, then service and repair the front engine mount. After that, get rid of the bolts from the mount that are numbered 1 and 2. After that, remove bolt numbered 1 to get the mount out. After that, using number 3 for reference, pull out the bolts that hold the fore aft member in and take it out. Remove the front mount with the number 4 last.

How to install the left engine mount on Dodge Caliber?

Mount 2 should be placed on the frame rail and held with bolts 1 that are torqued to 75 Nm (55 ft. lbs.). The following step is to install bolt 3 and tighten it to a torque of 100 Nm (74 ft. lbs.). After taking out the jack, put on the PCM mounting bracket and then secure the PCM 1. After attaching the negative cable to battery 3, put on the air cleaner housing and inlet.

OEM Dodge Caliber Engine Mount

Engine Motor Mount

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

15 Engine Mounts found

View related parts
Dodge Caliber Transmission Mount Part Number: 68309249AB
$226.60 MSRP: $338.00
You Save: $111.40 (33%)
ADD TO CART
Product Specifications
- Other Name: Insulator - Engine Mount; Automatic Transmission Mount; Engine Mount Bracket; Transfer Case Mount; Motor Mount; Side Mount; Front Mount; Rear Mount
- Replaces: 5105667AF, 5105667AC, 5105667AB, 68309249AA, 5105667AG, 5105667AE, 5105667AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2012 Dodge Caliber | Express, Heat, Mainstreet, R/T, Rush, SE, SXT, SXT Plus, Uptown | 2.0L L4, 2.4L L4, 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
Dodge Caliber Mount Brace Part Number: 5105596AB
$104.33 MSRP: $158.00
You Save: $53.67 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket - Engine Mount; Engine Mount Bracket; Motor Mount; Insulator Cushion Mount Bracket; Bracket Engine Mount
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2012 Dodge Caliber | Express, Heat, Mainstreet, R/T, Rush, SE, SRT-4, SXT, SXT Plus, Uptown | 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
Dodge Caliber Engine Support Part Number: 5105290AC
$152.73 MSRP: $231.00
You Save: $78.27 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Support - Engine Mount; Engine Mount Support Bracket; Engine Mount Bracket; Motor Mount; Mount Support; Support Engine Mount
- Replaces: 5105290AA, 5105290AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2012 Dodge Caliber | Express, Heat, Mainstreet, R/T, Rush, SE, SXT, SXT Plus, Uptown | 1.8L L4, 2.0L L4, 2.4L L4, 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
Dodge Caliber Front Mount Part Number: 5105494AF
$245.86 MSRP: $366.00
You Save: $120.14 (33%)
ADD TO CART
Product Specifications
- Other Name: Insulator; Engine Mount Support Bracket; Torque Strut; Motor Mount; Rear Mount; Insulator Cushion
- Replaces: 5105494AD, 5105494AC, 5105493AB, 5105494AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2012 Dodge Caliber | Express, Heat, Mainstreet, R/T, Rush, SE, SXT, SXT Plus, Uptown | 1.8L L4, 2.0L L4, 2.4L L4, 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
Dodge Caliber Rear Mount Part Number: 5105495AI
$263.99 MSRP: $392.00
You Save: $128.01 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Insulator; Engine Mount Support Bracket; Engine Mount; Engine Mount Bracket; Motor Mount; Rear Support; Support
- Replaces: 5105495AF, 5105498AC, 5105498AE, 5105495AE, 5105495AG, 5105495AD, 5105498AD, 5105495AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2008 Dodge Caliber | R/T, SE, SRT-4, SXT | 2.4L L4, 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
Dodge Caliber Mount Bracket, Rear Part Number: 68032586AH
$86.94 MSRP: $123.00
You Save: $36.06 (30%)
ADD TO CART
Product Specifications
- Other Name: Support; Engine Mount Support Bracket; Engine Mount Bracket; Engine Mount, Rear; Engine Mount; Motor Mount; Rear Mount; Rear Support
- Position: Rear
- Replaces: 68032586AB, 68032586AA, 68032586AF, 5105499AD, 5105511AC, 5105499AC, 68032586AC, 68032586AE, 5105511AE, 68032586AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2012 Dodge Caliber | Express, Heat, Mainstreet, R/T, Rush, SE, SXT, SXT Plus, Uptown | 1.8L L4, 2.0L L4, 2.4L L4, 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
Dodge Caliber Side Mount Part Number: 5105489AK
$253.79 MSRP: $377.00
You Save: $123.21 (33%)
ADD TO CART
Product Specifications
- Other Name: Insulator - Engine Mount; Engine Mount; Engine Mount Torque Strut; Engine Mount Bracket; Motor Mount; Front Mount; Mount Insulator
- Replaces: 5105489AE, 5105489AH, 5105489AG, 5105489AI, 5105489AD, 5105489AF
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2012 Dodge Caliber | Express, Heat, Mainstreet, R/T, Rush, SE, SRT-4, SXT, SXT Plus, Uptown | 1.8L L4, 2.0L L4, 2.4L L4, 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
Dodge Caliber Mount Bracket Part Number: 5105409AE
$50.06 MSRP: $74.45
You Save: $24.39 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket - Engine Mount; Automatic Transmission Mount Bracket; Engine Mount Bracket; Motor Mount; Support Bracket; Bracket Transmission Case Mounting; Bracket Engine Mount
- Replaces: 5105409AD, 5105409AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2008 Dodge Caliber | R/T | 2.4L L4, 4 Cyl 2.4 L GAS
View related parts
Dodge Caliber Support Bracket Part Number: 4854670AC
$106.65 MSRP: $136.00
You Save: $29.35 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket - Engine Mount; Engine Mount Support Bracket; Engine Mount Bracket; Motor Mount
- Replaces: 4854670AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2009 Dodge Caliber | SRT-4 | 2.4L L4, 4 Cyl 2.4 L GAS
View related parts
Dodge Caliber Transmission Mount Part Number: 5105492AG
$51.80 MSRP: $78.55
You Save: $26.75 (35%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Insulator - Engine Mount; Automatic Transmission Mount; Engine Mount Bracket; Transfer Case Mount; Motor Mount; Side Mount; Front Mount
- Replaces: 5105492AE, 5105492AD, 5105492AF
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2009 Dodge Caliber | R/T, SE, SXT | 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
Dodge Caliber Insulator Part Number: 5038045AB
Product Specifications
- Other Name: Insulator - Engine Mount; Engine Mount Support Bracket Insulator; Engine Mount Bracket; Motor Mount; Isolator Engine Mount
- Replaces: 5038045AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2009 Dodge Caliber | SRT-4 | 2.4L L4, 4 Cyl 2.4 L GAS
View related parts
Dodge Caliber Engine Support Part Number: 68020291AC
Product Specifications
- Other Name: Support - Engine Mount; Engine Mount; Motor Mount
- Replaces: 68020291AA, 68020291AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2009 Dodge Caliber | SRT-4 | 1.8L L4, 2.0L L4, 2.4L L4, 4 Cyl 2.4 L GAS
View related parts
Dodge Caliber Transmission Mount Part Number: 5038675AB
Product Specifications
- Other Name: Insulator - Engine Mount; Automatic Transmission Mount; Engine Mount Bracket; Transfer Case Mount; Motor Mount; Front Mount
- Replaces: 5038675AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2009 Dodge Caliber | SRT-4 | 2.0L L4, 2.4L L4, 4 Cyl 2.4 L GAS
View related parts
Dodge Caliber Transmission Mount Part Number: 68149266AA
Product Specifications
- Other Name: Insulator - Engine Mount; Manual Transmission Mount; Engine Mount Bracket; Transfer Case Mount; Motor Mount; Side Mount; Front Mount; Insulator Engine Mount Includes Item 2 Bracket
- Replaces: 5105669AD, 5105669AF, 5105669AG, 5105669AH, 5105669AE, 5105669AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2012 Dodge Caliber | R/T, Rush, SE, SRT-4, SXT, Uptown | 1.8L L4, 2.0L L4, 2.4L L4, 4 Cyl 1.8 L GAS, 4 Cyl 2.4 L GAS
View related parts
Dodge Caliber Rear Mount Part Number: 5038318AC
Product Specifications
- Other Name: Insulator - Engine Mount; Engine Mount Support Bracket; Engine Mount Bracket; Motor Mount; Support; Isolator Engine Mount
- Replaces: 5038318AB, 5038046AA, 5038318AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2009 Dodge Caliber | SRT-4 | 2.4L L4, 4 Cyl 2.4 L GAS

Dodge Caliber Engine Mount

Choose OEM Engine Mount that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each Engine Mount follows strict manufacturing steps to lock in quality and fit. If your Dodge Caliber matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Caliber parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

The Dodge Caliber Engine Mount is one of the Compass's prime parts that dramatically improve the Dodge Caliber lineup, which was produced from 2007 to 2012 and includes different models. This Engine Mount has the functionality of absorbing noise and vibration produced during the engines operation and it safely anchors the engine in the chassis to allow safe operation of a vehicle. Designed and built from metal and rubber the Dodge Caliber Engine Mount features hydraulic and electronic type both of which of which deliver excellent vibration dampening and added stability. This is because the car part interacts with different stock units of Caliber models such as SE and SXT; thus it is vital in ensuring the proper functioning and safety of the car. To ensure the engine mount is running smoothly, An inspection and in some cases maintenance of the Dodge Caliber Engine Mount is essential because with time it may get damaged and lead to performance problems like sponging or leaking. Dodge Caliber model is widely considered safe for the passengers as the car passed most of the crash tests; the Engine Mount helps to secure its position securely while the car operates. The Dodge Caliber Engine Mount also enhances the overall driving experience while also being a preferred asset in any car in the market in regard to the suspension and ride quality. Incorporating all the characteristics of high reliability, good performance, and safety improvements, the Dodge Caliber Engine Mount is a must-have for any car owner who wants to keep the Dodge Caliber in top condition.

Dodge Caliber Engine Mount Parts and Q&A

Transmission Mount
68309249AB
Q: How to Service and Repair a Front Engine Mount on Dodge Caliber?
A:
Prime by raising the vehicle, then service and repair the front engine mount. After that, get rid of the bolts from the mount that are numbered 1 and 2. After that, remove bolt numbered 1 to get the mount out. After that, using number 3 for reference, pull out the bolts that hold the fore aft member in and take it out. Remove the front mount with the number 4 last.
Rear Mount
5105495AI
Q: How to install the left engine mount on Dodge Caliber?
A:
Mount 2 should be placed on the frame rail and held with bolts 1 that are torqued to 75 Nm (55 ft. lbs.). The following step is to install bolt 3 and tighten it to a torque of 100 Nm (74 ft. lbs.). After taking out the jack, put on the PCM mounting bracket and then secure the PCM 1. After attaching the negative cable to battery 3, put on the air cleaner housing and inlet.