How to Remove and Repair a Power Steering Hose on Dodge Caliber?

Before working on the power steering line/hose, turn off the engine, remove the appearance cover and remove the coolant container. Take out as much fluid from the power steering fluid tank as you can and after that remove both the power steering and windshield washer reservoir. After that, remove the front fascia and right headlamp. Hold the vehicle up, then take out the return hose from the return tube. With the return hose routing clamp screw removed, set the car on flat ground. After that, take out the screw securing the return hose clamp at the strut tower. Lastly, loosen the clamps at the return hose ends on the power steering reservoir and cooler and slide the hose off the end of the cooler tube to take out the return hose from the vehicle.

How to Install a Power Steering Hose for a Gas Engine on Dodge Caliber?

Begin by placing the return hose in the engine bay and bolting one end of the power steering lines to the air conditioning bracket on the right side using bolt 1, tighten to a torque of 19 Nm (14 ft. lbs.) Then put on the engine mount, continue with the return hose routing clamp to secure the return hose to the body and apply the recommended tightening to screw 1 (19 Nm/14 ft. lbs.). Lift and support the vehicle, after that, put return hose 1 onto return tube 2 and secure it using a clamp. Fix the power steering cooler lines to the body with clips 3 and then snap on the right splash shield and the right front wheel and tire assembly. Secure the wheel mounting nuts with 135 Nm (100 ft. lbs.) torque. Mount the windshield wiper, power steering and coolant recovery bottles after you have lowered the vehicle. Bleed the power steering system, check all around for leaks and once that is done, put on the engine appearance cover.

OEM Dodge Caliber Power Steering Hose

Power Steering Pressure Hose

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 Power Steering Hoses found

View related parts
Dodge Caliber Power Steering Pressure Hose Part Number: 5105788AM
$158.33 MSRP: $241.00
You Save: $82.67 (35%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose - Power Steering Pressure And; Power Steering Hose; Pressure Hose; Power Steering Return Hose; Dual Lines with 5 Brackets
- Replaces: 5105788AB, 5105788AG, 5105788AE, 5105788AD, 5105788AF, 5105788AJ, 5105788AH, 5105788AL, 5105788AC, 5105788AI
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2012 Dodge Caliber | Express, Heat, Mainstreet, R/T, Rush, SE, SRT-4, SXT, SXT Plus, Uptown | 1.8L L4, 2.0L L4, 2.4L L4, 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
Dodge Caliber Power Steering Pressure Hose Part Number: 5105789AP
$134.92 MSRP: $202.00
You Save: $67.08 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Line - Power Steering Return; Power Steering Hose; Return Line Assembly
- Replaces: 5105789AG, 5105789AK, 5105789AH, 5105789AL, 5105789AJ, 5105789AF, 5105789AO, 5105789AI, 5105789AM
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2009-2012 Dodge Caliber | Express, Heat, Mainstreet, R/T, Rush, SE, SRT-4, SXT, SXT Plus, Uptown | 1.8L L4, 2.0L L4, 2.4L L4, 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
Dodge Caliber Power Steering Return Hose Part Number: 5290993AB
$44.38 MSRP: $78.15
You Save: $33.77 (44%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose - Power Steering Return; Power Steering Hose; Return Hose
- Replaces: 5290993AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2010 Dodge Caliber | Express, Heat, Mainstreet, R/T, Rush, SE, SRT-4, SXT, Uptown | 2.4L L4, 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
Dodge Caliber Power Steering Pressure Hose Part Number: 5105789AE
$66.28 MSRP: $97.50
You Save: $31.22 (33%)
Product Specifications
- Other Name: Line - Power Steering; Power Steering Hose; Suction Hose; Return Line Assembly; Hose Power Steering
- Replaces: 5105792AB, 5105792AC, 5105792AD, 5105789AD, 5105789AB, 5105792AA, 5105789AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2009 Dodge Caliber | R/T, SE, SRT-4, SXT | 1.8L L4, 2.0L L4, 2.4L L4, 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
Dodge Caliber Power Steering Return Hose Part Number: 5105092AF
Product Specifications
- Other Name: Hose - Power Steering Return; Power Steering Hose; Return Hose; Lower Hose
- Replaces: 5105092AB, 5105092AC, 5105092AD, 5105092AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2012 Dodge Caliber | Express, Heat, Mainstreet, Rush, SE, SXT, SXT Plus, Uptown | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
Dodge Caliber Power Steering Pressure Hose Part Number: 5181027AB
Product Specifications
- Other Name: Hose - Power Steering; Power Steering Hose; Hose And Cooler Power Steering
- Replaces: 5181027AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2010 Dodge Caliber | SRT-4 | 4 Cyl 2.4 L GAS
View related parts
Dodge Caliber Power Steering Pressure Hose Part Number: 5105090AG
Product Specifications
- Other Name: Hose - Power Steering Pressure; Power Steering Hose; Return Line Assembly
- Replaces: 5105090AC, 5105090AF, 5105090AB, 5105090AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2010-2012 Dodge Caliber | Express, Heat, Mainstreet, R/T, Rush, SE, SXT, SXT Plus, Uptown | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS

Dodge Caliber Power Steering Hose

Choose OEM Power Steering Hose that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each Power Steering Hose follows strict manufacturing steps to lock in quality and fit. If your Dodge Caliber matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Caliber parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

The Dodge Caliber Power Steering Hose is an important component that plays a major role of improving the reliability of the power steering in Dodge Caliber vehicles. This is an important hose that links the power steering pump to the steering gear allowing circulation of under high pressure steering fluid that enhances ease of steering. Engineered for high-performance driving environments, the Dodge Caliber Power Steering Hose product is created with concentrated and exclusive anti-wear guard- against-seepage, swell, and crack features for long-lasting reliability. This Power Steering Hose is suitable for numerous Dodge Caliber models including SE and SXT due to compatibility that enhances steering performance. Its function in improving the efficiency and safety cannot be overemphasized since a good power steering system contributes to easy and safe handling of the car. In particular, the Dodge Caliber Power Steering Hose may apply both the elastic rubber and metal tubing preformed in a specific shape, which serves the purpose of increasing the construction's durability and flexibility. Not only does this design enhance the functioning of the hose but is indeed a success in the area of innovation in the automotive market. Subsequently, getting hold of a new Power Steering Hose for the Dodge Caliber in times that it is needed is important so that the compact hatchback can smoothly handle the road as it maintains the reputation of a steady vehicle for consumers in every direction. In general, the Dodge Caliber Power Steering Hose can be reviewed as the product that presents the brand's focus on quality and performance.

Dodge Caliber Power Steering Hose Parts and Q&A

Power Steering Pressure Hose
5105788AM
Q: How to Remove and Repair a Power Steering Hose on Dodge Caliber?
A:
Before working on the power steering line/hose, turn off the engine, remove the appearance cover and remove the coolant container. Take out as much fluid from the power steering fluid tank as you can and after that remove both the power steering and windshield Washer Reservoir. After that, remove the front fascia and right headlamp. Hold the vehicle up, then take out the return hose from the return tube. With the return hose routing clamp screw removed, set the car on flat ground. After that, take out the screw securing the return hose clamp at the strut tower. Lastly, loosen the clamps at the return hose ends on the Power Steering Reservoir and cooler and slide the hose off the end of the cooler tube to take out the return hose from the vehicle.
Power Steering Pressure Hose
5105789AP
Q: How to Install a Power Steering Hose for a Gas Engine on Dodge Caliber?
A:
Begin by placing the return hose in the engine bay and bolting one end of the power steering lines to the air conditioning bracket on the right side using bolt 1, tighten to a torque of 19 Nm (14 ft. lbs.) Then put on the Engine Mount, continue with the return hose routing clamp to secure the return hose to the body and apply the recommended tightening to screw 1 (19 Nm/14 ft. lbs.). Lift and support the vehicle, after that, put return hose 1 onto return tube 2 and secure it using a clamp. Fix the power steering cooler lines to the body with clips 3 and then snap on the right splash shield and the right front wheel and tire assembly. Secure the wheel mounting nuts with 135 Nm (100 ft. lbs.) torque. Mount the windshield wiper, power steering and coolant recovery bottles after you have lowered the vehicle. Bleed the power steering system, check all around for leaks and once that is done, put on the engine appearance cover.