How to Service and Repair a Brake Light Switch on Dodge Caravan?

Start by removing the trim piece below the steering column and the lower cover of the column by undoing the two plastic screws that hold them to the instrument panel. After that, push and hold the brake pedal down and turn the switch counterclockwise 30 degrees and it will free itself from the mount. Unplug the wire connection to the switch. Be sure to completely stretch the plunger in your new brake lamp switch by holding the switch and pulling out on the plunger, making it move all the way to the end. Coat a little multipurpose grease on the place where the brake lamp switch plunger presses into the bracket. Cover the wiring harness connector to the brake lamp switch, fit the switch into the brake pedal bracket by pressing and holding the brake pedal, pushing it up to line the index mark on the switch with the mounting bracket slot and then twist the switch clockwise temporarily in order to secure it and check that it is upright. Take care not to apply more pressure than expected when adjusting the brake lamp switch to protect both parts. When you reach the stopping position, take your foot off the brake pedal so the switch plunger moves back into position, set correctly. Check the brake lights to be sure they are working right and not left on and finally reattach the trim cover that goes below the steering column together with the lower steering column cover.

How to Maintain the Brake Light Switch on Dodge Caravan?

Before starting, remove and separate the negative cable from the battery's post. Then, take out the silencer panel in the stowage below the steering column and the knee blocker. Just rotate the switch about 30 degrees counterclockwise and then pull it off the bracket. After using the release tab, pull away the wiring connector from the switch. The brake lamp switch cannot be saved, so discard it without reuse.

OEM Dodge Caravan Brake Light Switch

Brake Lamp Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Brake Light Switches found

View related parts
Dodge Caravan Parking Brake Switch, Black Part Number: 4221463
$18.50 MSRP: $27.20
You Save: $8.70 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch - Parking Brake; Electronic Parking Brake Control Switch; Parking Brake Warning Switch; Seat Adjuster, W/Bezel, Black Buttons, Woodgrain, W/Memory Opening.
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1991-1995 Dodge Caravan | Base, C/V, ES, LE, SE | 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L GAS
View related parts
Dodge Caravan Brake Switch Part Number: 4671336AD
$39.68 MSRP: $53.75
You Save: $14.07 (27%)
ADD TO CART
Product Specifications
- Other Name: Switch - Stop Lamp; Brake Light Switch; Stop Light Switch; Brake Pedal Switch; Lamp Switch; Release Switch; Stoplamp Switch; Switch; Switch Stop Lamp
- Replaces: 4671336, 4671336AC, 4671336AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1997-2000 Dodge Caravan | Base, ES, LE, SE, Sport | 2.4L L4, 3.0L V6, 3.3L V6, 3.8L V6, 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS, Electric Motor
View related parts
Dodge Caravan Brake Switch Part Number: 68003916AA
$35.51 MSRP: $51.80
You Save: $16.29 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch - Stop Lamp; Brake Pedal Switch; Stoplamp Switch
- Replaces: 4671334
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1994-1996 Dodge Caravan | Base, C/V, ES, LE, SE | 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L CNG, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS
View related parts
Dodge Caravan Brake Switch Part Number: 4373535
Product Specifications
- Other Name: Switch; Brake Light Switch; Brake Pedal Switch; Stoplamp Switch; Use Bracket 4221487; Striker 4221488; Speed Control.
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1991-1993 Dodge Caravan | Base, C/V, ES, LE, SE | 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L GAS
View related parts
Dodge Caravan Stoplamp Switch Part Number: 4373147
Product Specifications
- Other Name: Switch Stop Lamp & Speed Control; Switch, Stop Lamp And Speed Control; Stop Lamp, W/Speed Control
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1987-1990 Dodge Caravan | Base, C/V, ES, LE, SE | 4 Cyl 2.2 L GAS, 4 Cyl 2.5 L GAS, 4 Cyl 2.6 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L GAS
View related parts
Dodge Caravan Switch Package - Stop Lamp Part Number: 5083344AB
Product Specifications
- Other Name: SW PKG-STOP LAMP
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2007 Dodge Caravan | Base, C/V, Ec, SE, SXT, Sport | 2.4L L4, 3.3L V6, 4 Cyl 2.4 L GAS, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS

Dodge Caravan Brake Light Switch

Choose OEM Brake Light Switch that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each Brake Light Switch follows strict manufacturing steps to lock in quality and fit. If your Dodge Caravan matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Caravan parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

Function The Brake Light Switch in the Dodge Caravan is very important because it is responsible for powering the brake lights should the brake pedel be pressed. This mechanism helps the drivers at the back of the Dodge Caravan to be informed that the car is slowing or stopping hence increasing safety. Different styles of Brake Light Switch have been used in any model of Dodge Caravan over the years although specifics as to the various styles is not elaborated. The main emphasis is paid to the fact that the switch fulfills the purpose of enhancing the visual communication of braking actions to other drivers and does not vary between the versions of the Dodge Caravan. It is evident that the Brake Light Switch is of great importance to safe driving hence a critical element of the car's brake mechanism.

Dodge Caravan Brake Light Switch Parts and Q&A

Brake Switch
4671336AD
Q: How to Service and Repair a Brake Light Switch on Dodge Caravan?
A:
Start by removing the trim piece below the steering column and the lower cover of the column by undoing the two plastic screws that hold them to the instrument panel. After that, push and hold the brake pedal down and turn the switch counterclockwise 30 degrees and it will free itself from the mount. Unplug the wire connection to the switch. Be sure to completely stretch the plunger in your new brake lamp switch by holding the switch and pulling out on the plunger, making it move all the way to the end. Coat a little multipurpose grease on the place where the brake lamp switch plunger presses into the bracket. Cover the wiring harness connector to the brake lamp switch, fit the switch into the brake pedal bracket by pressing and holding the brake pedal, pushing it up to line the index mark on the switch with the mounting bracket slot and then twist the switch clockwise temporarily in order to secure it and check that it is upright. Take care not to apply more pressure than expected when adjusting the brake lamp switch to protect both parts. When you reach the stopping position, take your foot off the brake pedal so the switch plunger moves back into position, set correctly. Check the brake lights to be sure they are working right and not left on and finally reattach the trim cover that goes below the steering column together with the lower Steering Column Cover.
Switch Package - Stop Lamp
5083344AB
Q: How to Maintain the Brake Light Switch on Dodge Caravan?
A:
Before starting, remove and separate the negative cable from the battery's post. Then, take out the silencer panel in the stowage below the steering column and the knee blocker. Just rotate the switch about 30 degrees counterclockwise and then pull it off the bracket. After using the release tab, pull away the wiring connector from the switch. The brake lamp switch cannot be saved, so discard it without reuse.