How to Remove an A/C System Valve Core on Dodge Challenger?

Before you can remove the core from the service port valve, make sure to remove the protective cap on the service port. After that, gather the refrigerant that is still in the system. Take the Schrader core tool and remove the valve core from the tire's service port. After you have sorted everything out, seal the opened service port with a plug or tape.

How to Install an A/C System Valve Core on Dodge Challenger?

Before installing the service port valve core, first rub clean and recommended refrigerant oil over the valve core (3). Take off the tape or remove the plug from the service port (2). Make certain that the nut on the valve core is fully tightened in the A/C service port to avoid problems with refrigerant during the removal and adding of refrigerant to the system, as loose connections might allow refrigerant to escape when uncoupling the adapters. Insert the Schrader type valve core tool into the valve, then press it in to get the valve core into the service port(s). After you have installed it, properly evacuate and charge the refrigerant system. Make sure to attach the protective cap (1) to the service port to seal it and shield the system from contamination and reattach it when the service is done.

OEM Dodge Challenger A/C System Valve Core

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 A/C System Valve Cores found

View related parts
Dodge Challenger Check Valve Part Number: 5003461AA
$21.66 MSRP: $31.95
You Save: $10.29 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Valve Core - A/C Line, Low Side Adapter; Service Valve; HVAC Pressure Switch; A/C Trinary Switch; Pressure Switch; Service Valve; Suction Line Valve; Discharge Line Valve; Tube Assembly Valve.
- Replaces: 5011346AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2013 Dodge Challenger | R/T, R/T Classic, SE, SRT8, SXT, SXT Plus | 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS, 8 Cyl 6.4 L GAS
View related parts
Dodge Challenger Fill Valve Part Number: 68237083AA
$26.05 MSRP: $38.10
You Save: $12.05 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Valve - A/C Line; High Side Charging Adapter; Service Valve Core; Compressor Cut-Out Switch.; Suction Line Valve; Liquid Line Valve; Discharge Line Valve; Valve Core A/C Line High Side; Valve Core A/C Line
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2014-2023 Dodge Challenger | 392 Hemi Scat Pack Shaker, GT, R/T, R/T 392, R/T Plus, R/T Plus Shaker, R/T Scat Pack, R/T Scat Pack Shaker Widebody, R/T Scat Pack Widebody, R/T Shaker, Rallye Redline, SRT 392, SRT Demon, SRT Demon 170, SRT Hellcat, SRT Hellcat Jailbreak, SRT Hellcat Redeye, SRT Hellcat Redeye Jailbreak, SRT Hellcat Redeye Widebody, SRT Hellcat Redeye Widebody Jailbreak, SRT Hellcat Widebody, SRT Hellcat Widebody Jailbreak, SRT Jailbreak, SRT Super Stock, SRT8, SXT, SXT Plus, Scat Pack, T/A, T/A 392, T/A 392 Widebody | 6 Cyl 3.6 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 6.4 L GAS
View related parts
Dodge Challenger Check Valve Part Number: 5179284AA
$16.93 MSRP: $25.05
You Save: $8.12 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Valve - A/C Line; High & Low Side Charging Adapters; Compressor Cut-Out Switch; System Valve Core; Fill Valve; Liquid Line Valve; Valve; Valve Core A/C Line; Valve Charging
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2013 Dodge Challenger | R/T, R/T Classic, SE, SRT8, SXT, SXT Plus | 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS, 8 Cyl 6.4 L GAS
View related parts
Dodge Challenger Pressure Valve Part Number: 68237075AA
$14.54 MSRP: $21.25
You Save: $6.71 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Valve - A/C Line; A/C Service Valve Core; A/C Compressor Cut-Out Switch; A/C System Valve Core; A/C Line Valve; Suction & Liquid Line Valves; Hose & Tube Assembly Valves; Valve Core Low Side.
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2014-2023 Dodge Challenger | 392 Hemi Scat Pack Shaker, GT, R/T, R/T 392, R/T Plus, R/T Plus Shaker, R/T Scat Pack, R/T Scat Pack Shaker Widebody, R/T Scat Pack Widebody, R/T Shaker, Rallye Redline, SRT 392, SRT Demon, SRT Demon 170, SRT Hellcat, SRT Hellcat Jailbreak, SRT Hellcat Redeye, SRT Hellcat Redeye Jailbreak, SRT Hellcat Redeye Widebody, SRT Hellcat Redeye Widebody Jailbreak, SRT Hellcat Widebody, SRT Hellcat Widebody Jailbreak, SRT Jailbreak, SRT Super Stock, SRT8, SXT, SXT Plus, Scat Pack, T/A, T/A 392, T/A 392 Widebody | 6 Cyl 3.6 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 6.4 L GAS

Dodge Challenger A/C System Valve Core

Choose OEM A/C System Valve Core that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each A/C System Valve Core follows strict manufacturing steps to lock in quality and fit. If your Dodge Challenger matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Challenger parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

Dodge Challenger A/C System Valve Core Parts and Q&A

Check Valve
5003461AA
Q: How to Remove an A/C System Valve Core on Dodge Challenger?
A:
Before you can remove the core from the service port valve, make sure to remove the protective cap on the service port. After that, gather the refrigerant that is still in the system. Take the Schrader core tool and remove the valve core from the tire's service port. After you have sorted everything out, seal the opened service port with a plug or tape.
Check Valve
5179284AA
Q: How to Install an A/C System Valve Core on Dodge Challenger?
A:
Before installing the service port valve core, first rub clean and recommended refrigerant oil over the valve core (3). Take off the tape or remove the plug from the service port (2). Make certain that the nut on the valve core is fully tightened in the A/C service port to avoid problems with refrigerant during the removal and adding of refrigerant to the system, as loose connections might allow refrigerant to escape when uncoupling the adapters. Insert the Schrader type valve core tool into the valve, then press it in to get the valve core into the service port(s). After you have installed it, properly evacuate and charge the refrigerant system. Make sure to attach the protective cap (1) to the service port to seal it and shield the system from contamination and reattach it when the service is done.