How is the Blower Motor Installed in the HVAC Housing on Dodge Challenger?

Put the blower motor into the HVAC housing and attach it with the three screws, each tightened to 2.2 Nm (20 in. lbs.). Attach the blower motor connector to the wire harness and lock it into position. Then plug the HVAC wire harness into where the two retainers are shown. Once finished with the bulkhead, fit the instrument panel silencer to the passenger side of the instrument panel. In the end, attach the remaining negative battery cable.

OEM Dodge Challenger Blower Motor

A/C Heater Blower Motor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Blower Motors found

View related parts
Dodge Challenger Blower Motor Part Number: 68037308AA
$203.94 MSRP: $304.00
You Save: $100.06 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Motor - Blower With Wheel; HVAC Blower Motor Assembly; HVAC Blower Motor; Blower Assembly; Fan & Motor; Motor Blower With Wheel
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2013 Dodge Challenger | R/T, R/T Classic, SE, SRT8, SXT, SXT Plus | 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS, 8 Cyl 6.4 L GAS
View related parts
Dodge Challenger Blower Motor Part Number: 68238029AA
$222.07 MSRP: $331.00
You Save: $108.93 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Motor - Blower With Wheel; HVAC Blower Motor Assembly; Blower Assembly; Fan & Motor; Motor Blower With Wheel; HVAC Blower Motor
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2014-2023 Dodge Challenger | 392 Hemi Scat Pack Shaker, GT, R/T, R/T 392, R/T Plus, R/T Plus Shaker, R/T Scat Pack, R/T Scat Pack Shaker Widebody, R/T Scat Pack Widebody, R/T Shaker, Rallye Redline, SRT 392, SRT Demon, SRT Demon 170, SRT Hellcat, SRT Hellcat Jailbreak, SRT Hellcat Redeye, SRT Hellcat Redeye Jailbreak, SRT Hellcat Redeye Widebody, SRT Hellcat Redeye Widebody Jailbreak, SRT Hellcat Widebody, SRT Hellcat Widebody Jailbreak, SRT Jailbreak, SRT Super Stock, SRT8, SXT, SXT Plus, Scat Pack, T/A, T/A 392, T/A 392 Widebody | 6 Cyl 3.6 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 6.4 L GAS

Dodge Challenger Blower Motor

Choose OEM Blower Motor that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each Blower Motor follows strict manufacturing steps to lock in quality and fit. If your Dodge Challenger matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Challenger parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

Dodge Challenger Vehicles are equipped with a Blower Motor that regulates the Intakeflow of air to the cabin in Vehicles. Through the blower motor controls, drivers are in a position to set the climate of the car in the event that it is cold and they want to set it hot through the heater or whether it is hot and they want to make it cooler by adjusting the blower motor of the car's air conditioning system. These blower motor control circuits are cabled to a module to avail and switch easily, more to it. However, electronics in the module or wiring could be faulty which will make the system go wrong and bring inability to control the heating or cooling system. Any issues involving the blower motor controls should be fixed at the soonest possible time, for a comfortable ride to be provided.

Dodge Challenger Blower Motor Parts and Q&A

Blower Motor
68037308AA
Q: How is the Blower Motor Installed in the HVAC Housing on Dodge Challenger?
A:
Put the blower motor into the HVAC housing and attach it with the three screws, each tightened to 2.2 Nm (20 in. lbs.). Attach the blower motor connector to the wire harness and lock it into position. Then plug the HVAC wire harness into where the two retainers are shown. Once finished with the bulkhead, fit the instrument panel silencer to the passenger side of the instrument panel. In the end, attach the remaining negative Battery Cable.