How to Install a Brake Booster on Dodge Challenger?

For the power brake booster to work properly, make sure a NEW booster seal covers the push rod and studs on its backside before installing. Mount the NEW booster seal over the push rod and on each mounting stud. After that, pass the power brake booster through the gap between the cross-brace and windshield and attach the booster push rod and the mounting studs to the dash board. All four booster mounting nuts should be tightened as specified so that no vacuum leaks occur; ensure you tighten each mounting nut to 25 Nm (18 ft. lbs.). Slide the push rod for the booster onto the brake pedal pin and hold it in place by adding a NEW retaining clip. Adjust the brake lamp switch, then link the vacuum hose to the check valve that's on the front of the boost-be sure not to take off the check valve. Fix the master cylinder and the windshield wiper module in place. After that, attach the negative battery cable and follow instructions to fill and bleed the brakes.

How to Remove a Brake Booster on Dodge Challenger?

The first step to taking out the power brake booster is to move the seat fully to the rear and take off the negative battery cable. After that, remove the windshield wiper module and the master cylinder. Take out the vacuum hose from the check valve, allowing the check valve to stay attached to the side of the booster. After removing the brake lamp switch, insert a small screwdriver between the center tang and the retaining clip, rotate the clip and move it over the end of the brake pedal pin so you can pull it off. During the reassembly, throw out the old retaining clip and fit a new one. Draw the booster push rod from the brake pedal pin, remove the four bolts holding the booster to the dash panel and then slide the booster out through the gap between the cross-brace and windshield.

OEM Dodge Challenger Brake Booster

Brake Power Booster

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Brake Boosters found

View related parts
Dodge Challenger Brake Booster Part Number: 68048544AA
$323.49 MSRP: $414.00
You Save: $90.51 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Booster - Power Brake; Power Brake Booster; Booster; Booster Power Brake
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2009-2010 Dodge Challenger | R/T, SE, SRT8 | 6 Cyl 3.5 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS
View related parts
Dodge Challenger Brake Booster Part Number: 68089130AD
$188.08 MSRP: $277.00
You Save: $88.92 (33%)
ADD TO CART
Product Specifications
- Other Name: Booster - Power Brake; Power Brake Booster; Booster
- Replaces: 68089130AC, 68089130AB, 68089130AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2015-2023 Dodge Challenger | 392 Hemi Scat Pack Shaker, GT, R/T, R/T 392, R/T Plus, R/T Plus Shaker, R/T Scat Pack, R/T Scat Pack Shaker Widebody, R/T Scat Pack Widebody, R/T Shaker, SRT 392, SRT Demon, SRT Demon 170, SRT Hellcat, SRT Hellcat Jailbreak, SRT Hellcat Redeye, SRT Hellcat Redeye Jailbreak, SRT Hellcat Redeye Widebody, SRT Hellcat Redeye Widebody Jailbreak, SRT Hellcat Widebody, SRT Hellcat Widebody Jailbreak, SRT Jailbreak, SRT Super Stock, SXT, SXT Plus, Scat Pack, T/A, T/A 392, T/A 392 Widebody | 3.6L V6, 5.7L V8, 6 Cyl 3.6 L GAS, 6.2L V8, 6.4L V8, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 6.4 L GAS
View related parts
Dodge Challenger Brake Booster Part Number: 68033785AA
Product Specifications
- Other Name: Booster - Power Brake; Power Brake Booster; Booster; Booster Power Brake
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008 Dodge Challenger | SRT8 | 8 Cyl 6.1 L GAS
View related parts
Dodge Challenger Brake Booster Part Number: 68089129AB
Product Specifications
- Other Name: Booster - Power Brake; Power Brake Booster; Booster; Booster Power Brake
- Replaces: 68089129AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2014 Dodge Challenger | R/T, R/T Classic, Rallye Redline, SE, SRT8, SXT, SXT Plus | 3.6L V6, 5.7L V8, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6.4L V8, 8 Cyl 5.7 L GAS, 8 Cyl 6.4 L GAS

Dodge Challenger Brake Booster

Choose OEM Brake Booster that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each Brake Booster follows strict manufacturing steps to lock in quality and fit. If your Dodge Challenger matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Challenger parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

The Brake Booster in Dodge Challenger cars is one of those parts that are minute but can significantly improve the performance of the car by easing the operation of the brake pedal. This device mainly employs negative pressure, which means that it takes advantage of a vacuum produced by the engine to increase pressure applied to the brake pedal with a view of enhancing the braking systems. To do that, the various components of the Dodge Challenger models may vary depending on the type of Brake Booster it comes with, namely the Vacuum Brake Boosters and Hydraulic Brake Boosters. In vacuum brake booster, the engine vacuum is used whereas in hydraulic boosters pressure from power steering pump is used. The main difference between them is the functional implementation where vacuum boosters are totally reliant on the state of the engine. However, the Brake Booster plays a vital role in delivering good and reliable braking standards on Dodge Challenger cars.

Dodge Challenger Brake Booster Parts and Q&A

Brake Booster
68048544AA
Q: How to Install a Brake Booster on Dodge Challenger?
A:
For the power brake booster to work properly, make sure a NEW booster seal covers the push rod and studs on its backside before installing. Mount the NEW booster seal over the push rod and on each mounting stud. After that, pass the power brake booster through the gap between the cross-brace and windshield and attach the booster push rod and the mounting studs to the dash board. All four booster mounting nuts should be tightened as specified so that no vacuum leaks occur; ensure you tighten each mounting nut to 25 Nm (18 ft. lbs.). Slide the push rod for the booster onto the brake pedal pin and hold it in place by adding a NEW retaining clip. Adjust the brake lamp switch, then link the vacuum hose to the check valve that's on the front of the boost-be sure not to take off the check valve. Fix the master cylinder and the windshield wiper module in place. After that, attach the negative Battery Cable and follow instructions to fill and bleed the brakes.
Brake Booster
68033785AA
Q: How to Remove a Brake Booster on Dodge Challenger?
A:
The first step to taking out the power brake booster is to move the seat fully to the rear and take off the negative Battery Cable. After that, remove the Windshield wiper module and the master cylinder. Take out the vacuum hose from the check valve, allowing the check valve to stay attached to the side of the booster. After removing the brake lamp switch, insert a small screwdriver between the center tang and the retaining clip, rotate the clip and move it over the end of the brake pedal pin so you can pull it off. During the reassembly, throw out the old retaining clip and fit a new one. Draw the booster push rod from the brake pedal pin, remove the four bolts holding the booster to the dash panel and then slide the booster out through the gap between the cross-brace and windshield.