How to Service and Repair a TPMS Sensor on Dodge Charger?

Before servicing or repairing the tire pressure sensor, lift and support the car, take off the three wheel mounting nuts and remove the tire and wheel. Stay with the original valve stem cap to make sure moisture and contamination are kept out of the valve stem; avoid using a regular cap instead. The brass core in your valve stems should be redone using nickel-plating, since this protects the aluminum from the effects of dissimilar metals. Remove the tire from the wheel using the manufacturer's instructions and be sure not to place the Bead Breaker near the sensor while removing the bead from the wheel. Carefully place the tool on the valve stem, making sure it's at an angle of 10° both for the upper and lower tire beads as you remove the tire. Then, loosen the sensor nut holding the sensor to the wheel while carefully applying pressure against the metal valve stem from behind to stop it from shifting back and hurting the antenna strap. The last step is to take the sensor off the wheel.

How to Install a TPMS Sensor on Dodge Charger?

First, change seal 2 and metal washer 1 at the sensor valve stem base to ensure the sensor doesn't leak. Never clean in the area around the sensor/valve stem mounting hole on wheel 5 while the wheel is nearby, to prevent damage and always make sure the wheel surface is clean. With the rear part of the metal valve stem being pressed, place sensor 1 over wheel 2 and adjust so the potted part faces the wheel. After placing sensor nut 3 onto the sensor housing, push downward so that wheel sensor 2 recesses into the wheel before tightening it to 8 Nm (or 71 in. lbs.). Do not tighten the sensor nut too hard, as just a little extra force over 12 Nm (106 in. lbs.) can cause the sensor to come apart from the valve stem. Use the instructions from the manufacturer of the tire changer to avoid harming the sensor valve stem. When the tire is mounted, fill the tire up to the pressure shown on the Tire Inflation Pressure Label on the B-pillar of the driver's side and make sure the original style valve cap is sealed. Place the tire and wheel assembly onto the vehicle, eliminate the support and pull the vehicle down. It is possible to teach the system the sensor ID by either using the TPM-RKE Analyzer 9936 with a Scan Tool on the WIN Module or by driving the vehicle continuously above 15 mph (24 km/h) after it has stayed stationary for the required time. If the sensor will not respond to training, check the related diagnostic references.

OEM Dodge Charger TPMS Sensor

Tire Pressure Monitoring System Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 TPMS Sensors found

View related parts
Dodge Charger TPMS Sensor Part Number: 68241067AB
$106.84 MSRP: $160.00
You Save: $53.16 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Tire Pressure; TPMS Sensor Valve Assembly; Valve Repair Set; TPMS Service Kit.; Tire Pressure Sensor; Sensor; Sensor Tire Pressure Includes Cap; Sensor Tire Pressure
- Replaces: 68241067AA, 68142397AA, 68406537AA, 56029398AA, 68359037AA, 56029398AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2010-2023 Dodge Charger | Daytona, Daytona 392, GT, GT Plus, Pursuit, R/T, R/T 392, R/T Road & Track, R/T Scat Pack, SE, SRT 392, SRT Hellcat, SRT Hellcat Redeye Widebody, SRT Hellcat Redeye Widebody Jailbreak, SRT Hellcat Widebody, SRT Hellcat Widebody Jailbreak, SRT Jailbreak, SRT8, SXT, SXT Plus, SXT Plus Leather, Scat Pack, Scat Pack 392 Widebody, Scat Pack Widebody | 2.7L V6, 3.5L V6, 3.6L V6, 5.7L V8, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6.1L V8, 6.4L V8, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 6.4 L GAS
View related parts
Dodge Charger TPMS Sensor Part Number: 68078861AC
$106.43 MSRP: $161.00
You Save: $54.57 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Tire Pressure; Tire Pressure Monitoring System Sensor; TPMS Sensor Service Kit; Tire Pressure Sensor; Pressure Sensor; Hardware Kit; Sensor
- Replaces: 68078861AA, 68001696AA, 56053030AB, 68001696AB, 68078861AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2007 Dodge Charger | Base, Daytona R/T, Pursuit, R/T, SE, SRT8, SXT | 2.7L V6, 3.5L V6, 5.7L V8, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 6.1L V8, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS
View related parts
Dodge Charger TPMS Sensor Part Number: 68078768AC
$48.91 MSRP: $105.00
You Save: $56.09 (54%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Tire Pressure; Tire Pressure Monitoring System Sensor; TPMS Sensor Service Kit; Tire Pressure Sensor; Pressure Sensor; Sensor
- Replaces: 68001698AB, 56053031AB, 68001698AC, 68078768AA, 56053031AC, 56029527AA, 68078768AB, 68001698AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008 Dodge Charger | Pursuit, R/T, SE, SRT8, SXT | 2.7L V6, 3.5L V6, 5.7L V8, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 6.1L V8, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS
View related parts
Dodge Charger TPMS Sensor Part Number: 68406529AB
$108.10 MSRP: $162.00
You Save: $53.90 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Tire Pressure; Tire Pressure Sensor
- Replaces: 68406529AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2012-2023 Dodge Charger | 3.6L V6, 5.7L V8, 6.2L V8, 6.4L V8
- 2009-2010 Dodge Charger
View related parts
Dodge Charger Control Module Part Number: 68214806AF
$129.34 MSRP: $195.00
You Save: $65.66 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Module - Tire Pressure Monitoring; Tire Pressure Monitoring System Control Module; TPMS Sensor Service Kit; Module; Module Tire Pressure Monitoring Module & Mounting Bracket; Module Tire Pressure Monitoring
- Replaces: 68214806AA, 68214806AD, 68214806AE, 68214806AB, 68214806AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2014-2023 Dodge Charger | Daytona, Daytona 392, GT, GT Plus, Pursuit, R/T, R/T 392, R/T Road & Track, R/T Scat Pack, SE, SRT 392, SRT Hellcat, SRT Hellcat Redeye Widebody, SRT Hellcat Redeye Widebody Jailbreak, SRT Hellcat Widebody, SRT Hellcat Widebody Jailbreak, SRT Jailbreak, SXT, SXT Plus, SXT Plus Leather, Scat Pack, Scat Pack 392 Widebody, Scat Pack Widebody | 3.6L V6, 5.7L V8, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6.2L V8, 6.4L V8, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 6.4 L GAS
View related parts
Dodge Charger Control Module Part Number: 56029543AD
$133.80 MSRP: $202.00
You Save: $68.20 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Module - Tire Pressure Monitoring; Tire Pressure Monitoring System Control Module; Module; Module Tire Pressure Monitoring With Bracket; Module Tire Pressure Monitoring
- Replaces: 56029543AC, 56029543AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2014 Dodge Charger | Pursuit, R/T, SE, SRT8, SXT, SXT Plus | 3.6L V6, 5.7L V8, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6.4L V8, 8 Cyl 5.7 L GAS, 8 Cyl 6.4 L GAS

Dodge Charger TPMS Sensor

Choose OEM TPMS Sensor that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each TPMS Sensor follows strict manufacturing steps to lock in quality and fit. If your Dodge Charger matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Charger parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

The Dodge Charger TPMS Sensor plays the key role in providing safety and proper functionality of the Dodge Charger automobiles. This TPMS Sensor is essential for monitoring tire pressure, essential for safe driving conditions, and highly reliable and high performance. This is a TPMS Sensor that fits different Charger models and helps to boost the performance of the car due to the monitoring of tire pressure and the prevention of complications related to tires. The direct TPMS Sensor provides accurate data and the indirect is one that assumes pressure without sensors meeting the needs of customers with varying needs. These types of sensors have a lifespan of about 5 years, and consequently, the batteries tend to degrade; thus, Dodge Charger owners should be more cautious. The Dodge Charger TPMS Sensor comes in various types, particularly, clamp in, and screw in; currently available in sets and singly for easy acquisition by all the Charger lovers. Enhanced by the warranties of the manufacturers such as ORO-TEK that focuses on the quality of the Dodge Charger TPMS Sensor. This TPMS Sensor not only improves the satisfaction of driving but also plays the role in vehicle safety; therefore, it creates a competitive advantage to automotive systems. Designs of the Dodge Charger TPMS Sensor perfectly demonstrate that Dodge vehicles are developed for performance and safety focused to the use of modern technology and ergonomic designs.

Dodge Charger TPMS Sensor Parts and Q&A

TPMS Sensor
68078861AC
Q: How to Service and Repair a TPMS Sensor on Dodge Charger?
A:
Before servicing or repairing the tire pressure sensor, lift and support the car, take off the three wheel mounting nuts and remove the tire and wheel. Stay with the original valve stem cap to make sure moisture and contamination are kept out of the valve stem; avoid using a regular cap instead. The brass core in your valve stems should be redone using nickel-plating, since this protects the aluminum from the effects of dissimilar metals. Remove the tire from the wheel using the manufacturer's instructions and be sure not to place the Bead Breaker near the sensor while removing the bead from the wheel. Carefully place the tool on the valve stem, making sure it's at an angle of 10° both for the upper and lower tire beads as you remove the tire. Then, loosen the sensor nut holding the sensor to the wheel while carefully applying pressure against the metal valve stem from behind to stop it from shifting back and hurting the antenna strap. The last step is to take the sensor off the wheel.
TPMS Sensor
68406529AB
Q: How to Install a TPMS Sensor on Dodge Charger?
A:
First, change seal 2 and metal washer 1 at the sensor valve stem base to ensure the sensor doesn't leak. Never clean in the area around the sensor/valve stem mounting hole on wheel 5 while the wheel is nearby, to prevent damage and always make sure the wheel surface is clean. With the rear part of the metal valve stem being pressed, place sensor 1 over wheel 2 and adjust so the potted part faces the wheel. After placing sensor nut 3 onto the sensor housing, push downward so that wheel sensor 2 recesses into the wheel before tightening it to 8 Nm (or 71 in. lbs.). Do not tighten the sensor nut too hard, as just a little extra force over 12 Nm (106 in. lbs.) can cause the sensor to come apart from the valve stem. Use the instructions from the manufacturer of the tire changer to avoid harming the sensor valve stem. When the tire is mounted, fill the tire up to the pressure shown on the Tire Inflation Pressure Label on the B-pillar of the driver's side and make sure the original style valve cap is sealed. Place the tire and wheel assembly onto the vehicle, eliminate the support and pull the vehicle down. It is possible to teach the system the sensor ID by either using the TPM-RKE Analyzer 9936 with a Scan Tool on the WIN Module or by driving the vehicle continuously above 15 mph (24 km/h) after it has stayed stationary for the required time. If the sensor will not respond to training, check the related diagnostic references.