How to Service and Repair a Left Exhaust Manifold on Dodge Charger?

First, remove the gas line from the battery in the trunk and also disconnect the intake air temperature sensor. Disconnect the air cleaner housing assembly, the tube of the oil dipstick and the oxygen sensor. After removing the upper and lower heat shields, place the rocket under a hoist. Disconnect the oxygen sensor at the bottom of the manifold and pull out the exhaust pipe. After that, remove the bolts holding the exhaust manifold onto the head and remove the manifold. Look for cracks or damage on the exhaust manifolds, make sure they are not warped and check the exhaust manifold gasket for unusual color or shape. Also, smooth on a level and straight surface using a straightedge and thickness gauge to spot any irregularities on the cylinder head mounting surface. Link the negative battery cable and then slowly raise the car, putting in the new gasket and manifold. Tighten the bolts from the center out to 23 Nm (200 inch lbs.). Rebolting the heat shields below and above the engine is step two; tighten the bolts to 28 Nm, then link the exhaust pipes to the manifolds and join the oxygen sensor connections below. Drop the car to the ground, set the oxygen sensor in place, link its power connection and then attach the negative battery cable again.

How to Remove and Replace the Right Exhaust Manifold on Dodge Charger?

Ensure you cut off the negative battery cable in the trunk before you replace the right exhaust manifold. After that, disconnect and take out the sensor that goes before the catalytic converter. Lift the car and disconnect the EGR tube from the EGR valve and the manifold. Separate the electrical connector of the downstream oxygen sensor from the exhaust pipe and take out the pipe from the manifold. After that, get rid of the upper heat shield and lower heat shield. After that, get rid of the bolts that hold the manifold to the engine and remove the manifold.

OEM Dodge Charger Exhaust Manifold

Engine Exhaust Manifold

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

15 Exhaust Manifolds found

View related parts
Dodge Charger Exhaust Manifold, Passenger Side Part Number: 53013848AG
$227.73 MSRP: $339.00
You Save: $111.27 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Manifold - Exhaust; Exhaust Manifold, Right; Manifold Exhaust
- Position: Passenger Side
- Replaces: 53013848AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2009-2023 Dodge Charger | Daytona, Pursuit, R/T, R/T Road & Track, SE | 5.7L V8, 8 Cyl 5.7 L GAS
View related parts
Dodge Charger Exhaust Manifold, Driver Side Part Number: 53013849AE
$217.54 MSRP: $324.00
You Save: $106.46 (33%)
ADD TO CART
Product Specifications
- Other Name: Manifold - Exhaust; Exhaust Manifold, Left; Manifold Exhaust
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2009-2023 Dodge Charger | Daytona, Pursuit, R/T, R/T Road & Track, SE | 8 Cyl 5.7 L GAS
View related parts
Dodge Charger Exhaust Manifold, Driver Side Part Number: 4792779AA
$191.98 MSRP: $355.00
You Save: $163.02 (46%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Manifold - Exhaust; Exhaust Manifold, Left; Manifold Exhaust
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2010 Dodge Charger | Base, Pursuit, SE, SXT | 6 Cyl 3.5 L GAS
View related parts
Dodge Charger Exhaust Manifold, Passenger Side Part Number: 4792778AA
$284.38 MSRP: $423.00
You Save: $138.62 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Manifold - Exhaust; Exhaust Manifold, Right; Manifold Exhaust
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2010 Dodge Charger | Base, Pursuit, SE, SXT | 6 Cyl 3.5 L GAS
View related parts
Dodge Charger Exhaust Manifold, Passenger Side Part Number: 5038756AC
$801.13 MSRP: $1225.00
You Save: $423.87 (35%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Manifold - Exhaust; Exhaust Manifold, Right
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2021-2023 Dodge Charger | SRT Hellcat Redeye Widebody, SRT Hellcat Redeye Widebody Jailbreak, SRT Hellcat Widebody, SRT Hellcat Widebody Jailbreak, SRT Jailbreak, Scat Pack, Scat Pack Widebody | 8 Cyl 6.2 L GAS, 8 Cyl 6.4 L GAS
View related parts
Dodge Charger Exhaust Manifold, Driver Side Part Number: 5038757AC
$819.91 MSRP: $1250.00
You Save: $430.09 (35%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Manifold - Exhaust; Exhaust Manifold, Left
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2021-2023 Dodge Charger | SRT Hellcat Redeye Widebody, SRT Hellcat Redeye Widebody Jailbreak, SRT Hellcat Widebody, SRT Hellcat Widebody Jailbreak, SRT Jailbreak, Scat Pack, Scat Pack Widebody | 8 Cyl 6.2 L GAS, 8 Cyl 6.4 L GAS
View related parts
Dodge Charger Exhaust Manifold, Passenger Side Part Number: 5038756AB
$830.13 MSRP: $1225.00
You Save: $394.87 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Manifold - Exhaust; Exhaust Manifold, Right
- Position: Passenger Side
- Replaces: 5038756AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2015-2020 Dodge Charger | Daytona 392, R/T 392, R/T Scat Pack, SRT 392, SRT Hellcat, SRT Hellcat Widebody, Scat Pack, Scat Pack 392 Widebody | 6.2L V8, 6.4L V8, 8 Cyl 6.2 L GAS, 8 Cyl 6.4 L GAS
View related parts
Dodge Charger Exhaust Manifold, Driver Side Part Number: 5038757AB
$849.59 MSRP: $1250.00
You Save: $400.41 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Manifold - Exhaust; Exhaust Manifold, Left
- Position: Driver Side
- Replaces: 5038757AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2015-2020 Dodge Charger | Daytona 392, R/T 392, R/T Scat Pack, SRT 392, SRT Hellcat, SRT Hellcat Widebody, Scat Pack, Scat Pack 392 Widebody | 6.2L V8, 6.4L V8, 8 Cyl 6.2 L GAS, 8 Cyl 6.4 L GAS
View related parts
Dodge Charger Exhaust Manifold, Driver Side Part Number: 5037633AF
$929.05 MSRP: $1310.00
You Save: $380.95 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Manifold - Exhaust; Exhaust Manifold, Left; Manifold Exhaust
- Position: Driver Side
- Replaces: 5037633AD, 5037633AB, 5037633AC, 5037633AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2012-2014 Dodge Charger
- 2006-2010 Dodge Charger | 6.1L V8
View related parts
Dodge Charger Exhaust Manifold, Passenger Side Part Number: 5037632AF
$957.45 MSRP: $1360.00
You Save: $402.55 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Manifold - Exhaust; Exhaust Manifold, Right; Manifold Exhaust
- Position: Passenger Side
- Replaces: 5037632AE, 5037632AC, 5037632AB, 5037632AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2012-2014 Dodge Charger
- 2006-2010 Dodge Charger | 6.1L V8
View related parts
Dodge Charger Exhaust Manifold, Driver Side Part Number: 4792771AC
Product Specifications
- Other Name: Manifold - Exhaust; Exhaust Manifold, Left; Manifold Exhaust
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2008 Dodge Charger | Daytona R/T, Pursuit, R/T, SE | 8 Cyl 5.7 L GAS
View related parts
Dodge Charger Exhaust Manifold, Passenger Side Part Number: 4792770AC
Product Specifications
- Other Name: Manifold - Exhaust; Exhaust Manifold, Right; Manifold Exhaust
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2008 Dodge Charger | Daytona R/T, Pursuit, R/T, SE | 8 Cyl 5.7 L GAS
View related parts
Dodge Charger Exhaust Manifold, Passenger Side Part Number: 4792762AB
Product Specifications
- Other Name: Manifold - Exhaust; Exhaust Manifold, Left, Right; Manifold Exhaust
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2010 Dodge Charger | Base, SE | 6 Cyl 2.7 L GAS
View related parts
Dodge Charger Exhaust Manifold Part Number: 4273099
Product Specifications
- Other Name: Manifold Exhaust; Manifold; Exhaust W/Ede Carburetor Or Edj High-Performance Engine.
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1984-1987 Dodge Charger | 2.2, Base, Shelby | 4 Cyl 2.2 L GAS
View related parts
Dodge Charger Exhaust Manifold, Driver Side Part Number: 4792763AA
Product Specifications
- Other Name: Manifold - Exhaust; Exhaust Manifold, Left, Right; Manifold Exhaust
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2010 Dodge Charger | Base, SE | 6 Cyl 2.7 L GAS

Dodge Charger Exhaust Manifold

Choose OEM Exhaust Manifold that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each Exhaust Manifold follows strict manufacturing steps to lock in quality and fit. If your Dodge Charger matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Charger parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

Thus, the Ultra Economical Doing car exhaust system specifically the exhaust manifold on Dodge Charger vehicles is very important in channeling hot exhaust gases from the engine to the exhaust system for overall efficient performance of the engine and also to minimize toxic emissions. Located at some locations depending on the type of engine normally it is positioned at the intake manifold system its primary function is to stop intake reversion and also to maintain the optimum flow which is good for the engines. There are different changes in design, dimension, and material of the exhaust manifold of Dodge charger such as cast iron and stainless steel. Additional parts called headers are usually available to increase the performance of the exhaust system through eliminating flow resistance, and increasing the rate of velocity of exhaust gases. Further, in todays modern motorcycle development, Yamaha implemented the EXUP system while H or X pipes were incorporated into crossplane v8 engines to enhance more exhaust note characteristics that ultimately increase overall engine capacity and acceleration. Maintenance of the exhaust manifold and replacement of the same should always be done to avoid poor performance and safety of passengers from toxic fumes.

Dodge Charger Exhaust Manifold Parts and Q&A

Exhaust Manifold, Driver Side
5037633AF
Q: How to Service and Repair a Left Exhaust Manifold on Dodge Charger?
A:
First, remove the gas line from the battery in the trunk and also disconnect the intake air temperature sensor. Disconnect the air cleaner housing assembly, the tube of the oil dipstick and the Oxygen Sensor. After removing the upper and lower heat shields, place the rocket under a hoist. Disconnect the oxygen sensor at the bottom of the manifold and pull out the exhaust pipe. After that, remove the bolts holding the exhaust manifold onto the head and remove the manifold. Look for cracks or damage on the exhaust manifolds, make sure they are not warped and check the exhaust manifold gasket for unusual color or shape. Also, smooth on a level and straight surface using a straightedge and thickness gauge to spot any irregularities on the cylinder head mounting surface. Link the negative Battery Cable and then slowly raise the car, putting in the new gasket and manifold. Tighten the bolts from the center out to 23 Nm (200 inch lbs.). Rebolting the heat shields below and above the engine is step two; tighten the bolts to 28 Nm, then link the exhaust pipes to the manifolds and join the oxygen sensor connections below. Drop the car to the ground, set the oxygen sensor in place, link its power connection and then attach the negative battery cable again.
Exhaust Manifold, Passenger Side
5037632AF
Q: How to Remove and Replace the Right Exhaust Manifold on Dodge Charger?
A:
Ensure you cut off the negative Battery Cable in the trunk before you replace the right exhaust manifold. After that, disconnect and take out the sensor that goes before the catalytic converter. Lift the car and disconnect the EGR Tube from the EGR Valve and the manifold. Separate the electrical connector of the downstream Oxygen Sensor from the exhaust pipe and take out the pipe from the manifold. After that, get rid of the upper heat shield and lower heat shield. After that, get rid of the bolts that hold the manifold to the engine and remove the manifold.