How to Remove and Replace Front Engine Mounts on Dodge Dakota?

Rubber-made mounts on the front support the engine on both its sides. Keys to removing the front mount: first disconnect the negative cable from the battery, raise the vehicle and hold up the engine. Following that, take off the through bolt and nut, lift the engine so the insulator has clearance and take out the bolts that connect the insulator to the block. After you have removed the insulator assembly, place the new one on the cylinder block and install the nuts and bolts, making sure each bolt is tightened to 81 Nm (60 ft. lbs.) and each nut to 47 Nm (35 ft. lbs.). Place the through bolt and nut into position, lower the engine with them resting in the frame bracket and confirm the engine is not carrying weight from the supporting device. Screw the through bolt nut to 68 Nm (60 ft. lbs.), take out the engine support, drop the car down and reconnect the negative cable to the battery.

How to Properly Install a Rear Engine Mount with Thread Locking Compound on Dodge Dakota?

Apply thread locking substance to the bolts prior to putting in the rear engine mount. Next, place the bolts at the rear of the transmission mount onto the bracket and tighten them to 61 Nm (45 ft.lbs.). Drop the transmission completely down until the mount is resting on the crossmember and the mount studs are sitting in the crossmember's slots. After that, install the nuts onto the transmission studs going through the slot in the crossmember and tighten them to 54 Nm (40 ft.lbs.).

OEM Dodge Dakota Engine Mount

Engine Motor Mount

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

47 Engine Mounts found

View related parts
Dodge Dakota Motor Mount Part Number: 52019716AB
Product Specifications
- Other Name: Insulator - Engine Mount; Engine Mount; Engine Mount Bracket; Front Mount; Front Insulator; Mount; Insulator Engine Mount
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1989-1991 Dodge Dakota | Base, LE, S, SE, Shelby, Sport | 8 Cyl 5.2 L GAS
View related parts
Dodge Dakota Front Mount, Passenger Side Part Number: 52020244AA
Product Specifications
- Other Name: Insulator - Engine Mount; Engine Mount, Rear Right, Right; Engine Mount Torque Strut; Engine Mount Bracket; Motor Mount; Rear Insulator; Front Insulator; Insulator Engine Mount
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2000-2004 Dodge Dakota | Base, SLT, SLT Plus, Sport, Sport Plus | 8 Cyl 4.7 L GAS, 8 Cyl 5.9 L GAS
View related parts
Dodge Dakota Mount Bracket, Passenger Side Part Number: 52013522AB
Product Specifications
- Other Name: Bracket - Engine Mount; Engine Mount Bracket, Right; Motor Mount; Bracket; Bracket Engine Mount; Engine Mount Bracket
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007 Dodge Dakota | Laramie, SLT, ST | 6 Cyl 3.7 L GAS
View related parts
Dodge Dakota Front Mount, Passenger Side Part Number: 52855712AA
Product Specifications
- Other Name: Insulator - Engine Mount; Engine Mount, Front Right, Right; Front Insulator; Insulator Engine Mount
- Position: Front Passenger Side
- Replaces: 52013356AB, 52013264AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2005-2010 Dodge Dakota | Big Horn, Laramie, Lone Star, SLT, ST, SXT, Sport, TRX, TRX4 | 6 Cyl 3.7 L GAS
View related parts
Dodge Dakota Front Mount, Driver Side Part Number: 52855713AA
Product Specifications
- Other Name: Insulator - Engine Mount; Engine Mount, Front Left, Left; Engine Mount Bracket; Motor Mount; Front Insulator; Insulator Engine Mount
- Position: Driver Side
- Replaces: 52013265AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2005-2010 Dodge Dakota | Big Horn, Laramie, Lone Star, SLT, ST, SXT, Sport, TRX, TRX4 | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS
View related parts
Dodge Dakota Front Mount, Passenger Side Part Number: 52855716AB
Product Specifications
- Other Name: Insulator - Engine Mount; Engine Mount, Front, Front Right; Front Insulator; Insulator Engine Mount
- Position: Front Passenger Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2010 Dodge Dakota | Big Horn, Laramie, Lone Star, SLT, ST, SXT, Sport, TRX, TRX4 | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS
View related parts
Dodge Dakota Mount Bracket, Passenger Side Part Number: 52021840AA
Product Specifications
- Other Name: Bracket - Engine Mount; Engine Mount Bracket, Right; Motor Mount; Bracket Engine Mount; Engine Mount Bracket
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2004 Dodge Dakota | Base, SLT, SLT Plus, SXT, Sport, Sport Plus | 6 Cyl 3.7 L GAS
View related parts
Dodge Dakota Mount Bracket, Passenger Side Part Number: 52013520AC
Product Specifications
- Other Name: Bracket - Engine Mount; Engine Mount Bracket, Right; Motor Mount; Front Mount; Bracket Engine Mount; Engine Mount Bracket
- Position: Passenger Side
- Replaces: 52013520AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2005-2010 Dodge Dakota | Big Horn, Laramie, Lone Star, SLT, ST, SXT, Sport, TRX, TRX4 | 4.7L V8, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS
View related parts
Dodge Dakota Mount Bracket, Passenger Side Part Number: 3897272
Product Specifications
- Other Name: Bracket Engine Support Front Right Hand; Engine Mount Bracket, Right; Engine Mount Torque Strut; Motor Mount; Front Mount Bracket; Engine Front Support - Right; Motor Mount Front Bracket; Engine Mount Bracket
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1989 Dodge Dakota
View related parts
Dodge Dakota Rear Mount Part Number: 52019998
Product Specifications
- Other Name: Insulator - Transmission Support; Automatic Transmission Mount; Engine Mount Torque Strut; Bracket; Motor Mount; Rear Insulator; Lower Insulator; Insulator; Bracket And Insulator Transmission Support; Isolator Engine Mount
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1995-2004 Dodge Dakota | Base, R/T, SLT, SLT Plus, SXT, Sport, Sport Plus, WS | 6 Cyl 3.7 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.2 L CNG, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS
View related parts
Dodge Dakota Front Mount, Rear Driver Side Part Number: 52020243AB
Product Specifications
- Other Name: Insulator - Engine Mount; Engine Mount, Left, Rear Left; Engine Mount Torque Strut; Engine Mount Bracket; Motor Mount; Rear Insulator; Front Insulator; Insulator Engine Mount
- Position: Rear Driver Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2000-2004 Dodge Dakota | Base, R/T, SLT, SLT Plus, Sport, Sport Plus | 8 Cyl 4.7 L GAS, 8 Cyl 5.9 L GAS
View related parts
Dodge Dakota Mount Bracket, Driver Side Part Number: 52020247AC
Product Specifications
- Other Name: Bracket - Engine Mount; Engine Mount Bracket, Left; Motor Mount; Front Mount; Bracket Engine Mount; Engine Mount Bracket
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2000-2003 Dodge Dakota | Base, R/T, SLT, SXT, Sport | 6 Cyl 3.9 L GAS, 8 Cyl 5.9 L GAS
View related parts
Dodge Dakota Mount Bracket, Driver Side Part Number: 52020257AB
Product Specifications
- Other Name: Bracket - Engine Mount; Engine Mount Bracket, Left; Motor Mount; Bracket Engine Mount; Engine Mount Bracket
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2000-2004 Dodge Dakota | Base, SLT, SLT Plus, Sport, Sport Plus | 8 Cyl 4.7 L GAS
View related parts
Dodge Dakota Front Mount, Passenger Side Part Number: 52020342AA
Product Specifications
- Other Name: Insulator Engine Mount; Engine Mount, Right; Engine Mount Bracket; Motor Mount; Front Insulator
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2000-2003 Dodge Dakota | R/T, SLT, Sport | 8 Cyl 5.9 L GAS
View related parts
Dodge Dakota Front Mount, Driver Side Part Number: 52020345AB
Product Specifications
- Other Name: Bag - Engine Mount; Engine Mount, Left, Rear Left; Engine Mount Torque Strut; Engine Mount Bracket; Motor Mount; Rear Insulator; Front Insulator; Insulator Engine Mount
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2003 Dodge Dakota | SLT, Sport | 8 Cyl 5.9 L GAS
View related parts
Dodge Dakota Mount Bracket, Passenger Side Part Number: 52020346AB
Product Specifications
- Other Name: Bracket - Engine Mount; Engine Mount Bracket, Right; Motor Mount; Bracket Engine Mount; Engine Mount Bracket
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2000-2003 Dodge Dakota | Base, R/T, SLT, SXT, Sport | 6 Cyl 3.9 L GAS, 8 Cyl 5.9 L GAS
View related parts
Dodge Dakota Rear Mount Part Number: 52020845AA
Product Specifications
- Other Name: Insulator - Transmission Support; Automatic Transmission Mount; Engine Mount Torque Strut; Bracket; Motor Mount; Rear Insulator; Lower Insulator; Bracket And Insulator Transmission Support; Insulator Engine Mount
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2003 Dodge Dakota | R/T, SLT, Sport | 8 Cyl 5.9 L GAS
View related parts
Dodge Dakota Front Mount, Driver Side Part Number: 52021009
Product Specifications
- Other Name: Insulator - Engine Mount; Engine Mount, Front Left, Left; Engine Mount Bracket; Motor Mount; Front Insulator; Insulator Engine Mount
- Position: Front Driver Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1997-2003 Dodge Dakota | Base, R/T, SLT, Sport | 8 Cyl 4.7 L GAS, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS
View related parts
Dodge Dakota Front Mount, Passenger Side Part Number: 52021834AA
Product Specifications
- Other Name: Insulator - Engine Mount; Engine Mount, Right; Engine Mount Bracket; Motor Mount; Front Insulator; Insulator Engine Mount
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2004 Dodge Dakota | Base, SLT, SLT Plus, SXT, Sport, Sport Plus | 6 Cyl 3.7 L GAS
View related parts
Dodge Dakota Front Mount, Driver Side Part Number: 52021835AA
Product Specifications
- Other Name: Insulator - Engine Mount; Engine Mount, Left; Engine Mount Bracket; Motor Mount; Front Insulator; Insulator Engine Mount
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2004 Dodge Dakota | Base, SLT, SLT Plus, SXT, Sport, Sport Plus | 6 Cyl 3.7 L GAS

| Page 1 of 3 |Next >

1-20 of 47 Results

Dodge Dakota Engine Mount

Choose OEM Engine Mount that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each Engine Mount follows strict manufacturing steps to lock in quality and fit. If your Dodge Dakota matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Dakota parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

The Engine Mount in Dodge Dakota vehicles serves two primary functions: It reduces noises and vibrations produced by the operation of the engine and firmly settles the engine inside the framework of the car. Such positioning is viable to ensure safety in vehicle operation and to avoid cases where vehicle parts are destroyed. The Engine Mounts used in Dodge Dakota models have ranged from the conventional rubber mounts, hydraulic fluid filled Engine Mounts and the recent high tech electronic active Engine Mounts. The earlier types of mounts are metallic having rubber providing spacing while the hydraulic types help damp excitation more. The most elaborate types alter their stiffness according to the RPM with an aim of supporting the engine and minimizing vibration. Dodge Dakota Engine Mounts are known to fail over time and this is mostly attributed to the aspects of age, heat and exposure to fluids and as results, one may experience sponginess or separation. These mounts must be kept in good condition by periodic examination since unusual noise and vibration are signs that these mounts should be changed.

Dodge Dakota Engine Mount Parts and Q&A

Front Mount, Driver Side
52019961AC
Q: How to Remove and Replace Front Engine Mounts on Dodge Dakota?
A:
Rubber-made mounts on the front support the engine on both its sides. Keys to removing the front mount: first disconnect the negative cable from the battery, raise the vehicle and hold up the engine. Following that, take off the through bolt and nut, lift the engine so the insulator has clearance and take out the bolts that connect the insulator to the block. After you have removed the insulator assembly, place the new one on the cylinder block and install the nuts and bolts, making sure each bolt is tightened to 81 Nm (60 ft. lbs.) and each nut to 47 Nm (35 ft. lbs.). Place the through bolt and nut into position, lower the engine with them resting in the frame bracket and confirm the engine is not carrying weight from the supporting device. Screw the through bolt nut to 68 Nm (60 ft. lbs.), take out the engine support, drop the car down and reconnect the negative cable to the battery.
Mount Bracket, Passenger Side
52013520AC
Q: How to Properly Install a Rear Engine Mount with Thread Locking Compound on Dodge Dakota?
A:
Apply thread locking substance to the bolts prior to putting in the rear engine mount. Next, place the bolts at the rear of the Transmission Mount onto the bracket and tighten them to 61 Nm (45 ft.lbs.). Drop the transmission completely down until the mount is resting on the crossmember and the mount studs are sitting in the crossmember's slots. After that, install the nuts onto the transmission studs going through the slot in the crossmember and tighten them to 54 Nm (40 ft.lbs.).