How to Service and Install a MAP Sensor on the Throttle Body on Dodge Dakota?

The MAP sensor is fixed in front of the throttle body and connected with a rubber fitting; it can be replaced after you remove the air duct from the throttle body. Now, take away the two bolts holding the MAP sensor in place and gently slide the vacuum fitting off the throttle body. To put in the new MAP sensor, apply the rubber L-shaped connector to the module, lower it over the throttle body and guide the fitting onto the vacuum nipple on the throttle body. Screw down the sensor to a torque of 3 Nm (25 in. lbs.) after checking that everything fits properly and reconnect the duct to the throttle body.

How to Remove and Inspect the Condition of a MAP Sensor on Dodge Dakota?

You mount the Manifold Absolute Pressure (MAP) sensor, using part number 7, in front of the intake manifold, part number 1. Disconnect the part number 2 electrical connector from the sensor as your first step. Wipe the area around the MAP sensor and only then undo the first mounting screw, number 8. Free the MAP sensor by sliding it off of locating pin 6 which is part number 6. Finally, look at the sensor o-ring which is part number 2.

OEM Dodge Dakota MAP Sensor

Manifold Air Pressure Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

8 MAP Sensors found

View related parts
Dodge Dakota M.A.P. Sensor Part Number: 56041018AD
$97.73 MSRP: $149.00
You Save: $51.27 (35%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Map; Manifold Absolute Pressure Sensor; Manifold Sensor; MAP Sensor; Sensor Map; Pressure Sensor
- Replaces: 56041018AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2003-2010 Dodge Dakota | Base, Big Horn, Laramie, Lone Star, R/T, SLT, SLT Plus, ST, SXT, Sport, Sport Plus, TRX, TRX4 | 3.7L V6, 4.7L V8, 6 Cyl 3.7 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.9 L GAS
View related parts
Dodge Dakota M.A.P. Sensor Part Number: 68002763AA
$112.00 MSRP: $167.00
You Save: $55.00 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Map; Manifold Absolute Pressure Sensor; Manifold Sensor; Pressure Sensor; MAP Sensor
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2002 Dodge Dakota | Base, R/T, SLT, SXT, Sport | 4 Cyl 2.5 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.9 L GAS
View related parts
Dodge Dakota M.A.P. Sensor Part Number: 56026770
$118.97 MSRP: $177.00
You Save: $58.03 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - M.A.P.; Manifold Absolute Pressure Sensor; Manifold Sensor; Pressure Sensor; MAP Sensor; Single Board Engine Control, Sensor, M.A.P. (Use Insulator 4504260) 1990; Bracket 56027080.
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1991-1996 Dodge Dakota | Base, LE, S, SE, SLT, Sport, WS | 4 Cyl 2.5 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 5.2 L CNG, 8 Cyl 5.2 L GAS
View related parts
Dodge Dakota M.A.P. Sensor Part Number: 56041018
$169.95 MSRP: $253.00
You Save: $83.05 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Map; Manifold Absolute Pressure Sensor; Manifold Sensor; MAP Sensor; Sensor Map; Pressure Sensor
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2000-2002 Dodge Dakota | Base, R/T, SLT, Sport | 4 Cyl 2.5 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.9 L GAS
View related parts
Dodge Dakota M.A.P. Sensor Part Number: 56029405
Product Specifications
- Other Name: Sensor - Map; Manifold Absolute Pressure Sensor; Manifold Sensor; MAP Sensor; Sensor Map See Note; Sensor Map; Pressure Sensor
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1997-2003 Dodge Dakota | Base, R/T, SLT, SXT, Sport | 4 Cyl 2.5 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS
View related parts
Dodge Dakota M.A.P. Sensor Part Number: 5233920
Product Specifications
- Other Name: Sensor - M.A.P.; Manifold Absolute Pressure Sensor; Manifold Sensor; Pressure Sensor; MAP Sensor; Single Board Engine Control, Sensor M.A.P. (Use Insulator 4504260) 1990; Map Sensor, 1988; Bracket, Coil
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1989-1991 Dodge Dakota | Base, LE, S, SE, Shelby, Sport | 6 Cyl 3.9 L GAS, 8 Cyl 5.2 L GAS
View related parts
Dodge Dakota M.A.P. Sensor Part Number: 4686485
Product Specifications
- Other Name: Sensor - Map; Manifold Absolute Pressure Sensor; Manifold Sensor; Pressure Sensor; MAP Sensor; Map Sensor, (Use Insul. 4368173, 4504260); 2.5L Engine (Bracket 5234278); 3.0 Engine Sensor.
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1992-1995 Dodge Dakota | Base, LE, S, SLT, Sport, WS | 4 Cyl 2.5 L GAS
View related parts
Dodge Dakota M.A.P. Sensor Part Number: 5014762AA
Product Specifications
- Other Name: Sensor - Map; Map Sensor
- Replaces: 4638256
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1990-1991 Dodge Dakota | Base, LE, S, SE | 4 Cyl 2.5 L GAS

Dodge Dakota MAP Sensor

Choose OEM MAP Sensor that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each MAP Sensor follows strict manufacturing steps to lock in quality and fit. If your Dodge Dakota matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Dakota parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

The MAP Sensor installed in Dodge Dakota is an important element that calculates the positive air pressure coming into the intake manifold, together with passing the obtained information to the ECU to modify the fuel circuitry. It plays a crucial role in setting the degree of air-fuel mixture for combustion purposes especially in the speed-density method. MAP sensor may be used on Dodge Dakota vehicles, or a mass airflow sensor, or both, in the case of forced induction engines. The MAP sensor helps in diagnosing problems with the engine and it is involved in metering of fuel, timing of ignition, and general performance of the engine through pressure data of air.

Dodge Dakota MAP Sensor Parts and Q&A

M.A.P. Sensor
56029405
Q: How to Service and Install a MAP Sensor on the Throttle Body on Dodge Dakota?
A:
The MAP sensor is fixed in front of the Throttle Body and connected with a rubber fitting; it can be replaced after you remove the Air Duct from the throttle body. Now, take away the two bolts holding the MAP sensor in place and gently slide the vacuum fitting off the throttle body. To put in the new MAP sensor, apply the rubber L-shaped connector to the module, lower it over the throttle body and guide the fitting onto the vacuum nipple on the throttle body. Screw down the sensor to a torque of 3 Nm (25 in. lbs.) after checking that everything fits properly and reconnect the duct to the throttle body.
M.A.P. Sensor
56041018AD
Q: How to Remove and Inspect the Condition of a MAP Sensor on Dodge Dakota?
A:
You mount the Manifold Absolute Pressure (MAP) sensor, using part number 7, in front of the Intake Manifold, part number 1. Disconnect the part number 2 electrical connector from the sensor as your first step. Wipe the area around the MAP sensor and only then undo the first mounting screw, number 8. Free the MAP sensor by sliding it off of locating pin 6 which is part number 6. Finally, look at the sensor o-ring which is part number 2.