How to Install the Engine Control Module and Verify Its Proper Functionality on Dodge Dakota?

Remove the ABS CAB for a moment before installing the Engine Control Module to make sure DTCs due to the VIN are not recorded. After you install it, connect the diagnostic scan tool to your car engine port and from the main menu, pick "1" to write your VIN to the PCM. Click on "Miscellaneous" and then press "Check VIN" to make sure the VIN is correct. When the VIN is confirmed, shut the ignition key off and reattach the ABS module connector to stop new DTCs from forming. Attach the PCM, then install and tighten the three mounting bolts to 3-5 Nm. Insert and rivet the ground strap to the PCM at the bottom and onto the inner-fender. Check the connectors in the PCM, especially the four 38-way ones and repair them if they are damaged or rusty before putting them into place. In addition, link the negative battery cable and run the diagnostic scanner tool to ensure you avoid the Diagnostic Trouble Code (DTC) when reprogramming your PCM with the correct Identification Number (VIN) and mileage from your vehicle.

How to Replace the Engine Control Module on Dodge Dakota?

The first thing to do is to isolate the negative battery cable so that you won't damage the new Engine Control Module. For now, remove the ABS CAB to stop problems with DTCs due to the VIN broadcast and once the PCM is changed, use a diagnostic scan tool to insert the VIN to the new PCM from the main menu by selecting "1." After that, select "Miscellaneous" and then click on "Check VIN." After typing the correct VIN, turn off the ignition and attach the ABS module connector. Program the new PCM using the same identification number (VIN) and mileage the car had originally with a diagnostic scan tool, to prevent a Diagnostic Trouble Code (DTC) from being set. You will find the PCM in the right corner of the engine compartment; unplug all four 38-way cables and remove the three bolts that hold it in place. After that, attach the ground strap and remove the PCM.

OEM Dodge Dakota Engine Control Module

Engine Control Computer

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

127 Engine Control Modules found

View related parts
Dodge Dakota Control Module Part Number: 5150498AA
$888.86 MSRP: $1305.00
You Save: $416.14 (32%)
ADD TO CART
Product Specifications
- Other Name: Module - Powertrain Control; Engine Control Module; PCM; ECM; Module Powertrain Control Generic
- Replaces: RL150498AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2010 Dodge Dakota | Big Horn, Laramie, Lone Star, ST | 6 Cyl 3.7 L GAS
View related parts
Dodge Dakota ECM Part Number: 56046332AC
$453.23 MSRP: $824.00
You Save: $370.77 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Module - Powertrain Control; Engine Control Module
- Replaced by: R6046332AG
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1998-1999 Dodge Dakota | Base, SLT, Sport | 8 Cyl 5.2 L GAS
View related parts
Dodge Dakota Control Module Part Number: 5150275AB
$730.82 MSRP: $1110.00
You Save: $379.18 (35%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Module - Powertrain Control; Engine Control Module; Transmission Control Module; Transmission Controller; PCM; ECM; Module Powertrain Control Generic
- Replaces: 5150248AC, 5150275AA, RL150275AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008 Dodge Dakota | SLT, ST, SXT, Sport, TRX, TRX4 | 6 Cyl 3.7 L GAS
View related parts
Dodge Dakota Control Module Part Number: 5150499AB
$673.36 MSRP: $1020.00
You Save: $346.64 (34%)
ADD TO CART
Product Specifications
- Other Name: Module - Powertrain Control; Engine Control Module; PCM; ECM; Module Powertrain Control Generic
- Replaces: 5150479AB, RL150499AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2010 Dodge Dakota | Big Horn, Laramie, Lone Star, ST, TRX4 | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX
View related parts
Dodge Dakota ECM Part Number: 56046331AE
$114.27 MSRP: $165.00
You Save: $50.73 (31%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Module - Powertrain Control; Engine Control Module
- Replaced by: R6046331AH
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1998-1999 Dodge Dakota | Base, SLT, Sport | 8 Cyl 5.2 L GAS
View related parts
Dodge Dakota ECM Part Number: 56046329AE
$183.55 MSRP: $270.00
You Save: $86.45 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Module - Powertrain Control; Engine Control Module
- Replaced by: 56046329AG
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1998-1999 Dodge Dakota | Base, SLT, Sport | 8 Cyl 5.2 L GAS
View related parts
Dodge Dakota ECM Part Number: 4882993
$382.43 MSRP: $557.00
You Save: $174.57 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Module - Powertrain Control; Engine Control Module
- Replaces: 56040923
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1996 Dodge Dakota | Base, SLT, Sport, WS | 8 Cyl 5.2 L CNG, 8 Cyl 5.2 L GAS
View related parts
Dodge Dakota ECM Part Number: 56046328AE
$337.47 MSRP: $494.00
You Save: $156.53 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Module - Powertrain Control; Engine Control Module
- Replaced by: R6046328AH
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1998-1999 Dodge Dakota | Base, SLT, Sport | 8 Cyl 5.2 L GAS
View related parts
Dodge Dakota ECM Part Number: 56046336AD
$550.75 MSRP: $802.00
You Save: $251.25 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Module - Powertrain Control; Engine Control Module
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2000 Dodge Dakota | SLT, Sport | 8 Cyl 5.9 L GAS
View related parts
Dodge Dakota ECM Part Number: 56046334AD
$550.75 MSRP: $802.00
You Save: $251.25 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Module - Powertrain Control; Engine Control Module
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2000 Dodge Dakota | SLT, Sport | 8 Cyl 5.9 L GAS
View related parts
Dodge Dakota ECM Part Number: 56040339AC
$619.78 MSRP: $899.00
You Save: $279.22 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Module - Powertrain Control; Engine Control Module
- Replaced by: R6040339AF
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2000 Dodge Dakota | Base, SLT, Sport | 4 Cyl 2.5 L GAS
View related parts
Dodge Dakota ECM Part Number: 56040340AC
$632.38 MSRP: $917.00
You Save: $284.62 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Module - Powertrain Control; Engine Control Module
- Replaced by: R6040340AF
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2000 Dodge Dakota | Base, SLT, Sport | 4 Cyl 2.5 L GAS
View related parts
Dodge Dakota ECM Part Number: 56040348AC
$711.38 MSRP: $1035.00
You Save: $323.62 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Module - Powertrain Control; Engine Control Module
- Replaced by: R6040348AG
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2000 Dodge Dakota | Base, SLT, Sport | 6 Cyl 3.9 L GAS
View related parts
Dodge Dakota ECM Part Number: 56046321AE
$414.30 MSRP: $600.00
You Save: $185.70 (31%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Module - Powertrain Control; Engine Control Module
- Replaced by: R6046321AG
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1998-1999 Dodge Dakota | Base, SLT, Sport | 6 Cyl 3.9 L GAS
View related parts
Dodge Dakota Control Module Part Number: R3008921
Product Specifications
- Other Name: Module - Engine Controller; Engine Control Module; ECM; Single Board Engine Controllers; S.B.E.C.
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1991-1995 Dodge Dakota | Base, LE, S, SE, SLT, Sport, WS | 4 Cyl 2.5 L GAS
View related parts
Dodge Dakota PCM Part Number: RL150315AB
Product Specifications
- Other Name: Module - Powertrain Control; Engine Control Module; ECM
- Replaces: 5150315AB, 5150315AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008 Dodge Dakota | SLT, ST, SXT, Sport, TRX, TRX4 | 3.7L V6, 6 Cyl 3.7 L GAS
View related parts
Dodge Dakota Control Module Part Number: R5150255AC
Product Specifications
- Other Name: Module - Powertrain Control; Engine Control Module; PCM; ECM; Module Powertrain Control Generic
- Replaces: 5150255AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2009 Dodge Dakota | Big Horn, Laramie, Lone Star, SLT, ST, SXT, Sport, TRX, TRX4 | 4.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX
View related parts
Dodge Dakota Control Module Part Number: 5094354AF
Product Specifications
- Other Name: Module - Powertrain Control; Engine Control Module; ECM
- Replaces: 5094354AD, 5094354AC, 5094354AE, RL094354AF
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007 Dodge Dakota | Laramie, SLT, ST | 4.7L V8, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS
View related parts
Dodge Dakota Control Module Part Number: R6029080AC
Product Specifications
- Other Name: Module - Powertrain Control; Engine Control Module; ECM; Module Powertrain Control Generic
- Replaces: 56029080AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2005 Dodge Dakota | Laramie, SLT, ST, Sport | 4.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L GAS
View related parts
Dodge Dakota Control Module Part Number: R6044743AD
Product Specifications
- Other Name: Module - Powertrain Control; Engine Control Module (ECM); Engine Control Module; ECM; Module Powertrain Control Generic
- Replaces: 56044749AC, 56044752AC, RL044743AD, 56044743AD, 56044743AC, 56044743AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2007 Dodge Dakota | Laramie, SLT, ST | 4.7L V8, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS

| Page 1 of 7 |Next >

1-20 of 127 Results

Dodge Dakota Engine Control Module

Choose OEM Engine Control Module that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each Engine Control Module follows strict manufacturing steps to lock in quality and fit. If your Dodge Dakota matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Dakota parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

The Engineers of Dodge automobiles have designed the Dakota Engine Control Module or commonly known as the Dodge Dakota ECM to have above average durability and reliability to manage the various operations of the Dakota vehicles' engine effectively. This particular is called the Engine Control Module, or digital motor electronics (DME), or engine control unit (ECU) and is critical since it assists in improving both efficacy, and safety of a vehicle particularly by controlling crucial aspects like fuel-air mixture and ignition timing. With the help of data from the engine sensors, the Dodge Dakota Engine Control Module alters the relevant parameters to provide the optimal operation of the vehicle's engine; thus, this part is critical for bringing out dependable and powerful vehicle operation to the drivers. The compatibility with Dakota models right from the first that rolled out the market in 1986 to the subsequent models provides rich implication of the role of this product in the overall function and structure of the vehicle. Interstingly the Dodge Dakota Engine Control Module is programmed and tasked with the challenges of controlling air-fuel mixes, idle pace, and variable valve speed, issues which when accomplished enhances fuel economy and decreases emissions. Also, the ECM could be overhauled and modified for race applications making it a hit with car tuners who want to optimize their ride. By getting up to date, the innovations, strength and fascinating designs of the Dodge Dakota Engine Control Module make it unique to the automotive Industry, thus making the Dakota the preferred mid-size pick-up truck of the current society.

Dodge Dakota Engine Control Module Parts and Q&A

Control Module
R6044743AD
Q: How to Install the Engine Control Module and Verify Its Proper Functionality on Dodge Dakota?
A:
Remove the ABS CAB for a moment before installing the Engine Control Module to make sure DTCs due to the VIN are not recorded. After you install it, connect the diagnostic scan tool to your car engine port and from the main menu, pick "1" to write your VIN to the PCM. Click on "Miscellaneous" and then press "Check VIN" to make sure the VIN is correct. When the VIN is confirmed, shut the ignition key off and reattach the ABS module connector to stop new DTCs from forming. Attach the PCM, then install and tighten the three mounting bolts to 3-5 Nm. Insert and rivet the ground strap to the PCM at the bottom and onto the inner-fender. Check the connectors in the PCM, especially the four 38-way ones and repair them if they are damaged or rusty before putting them into place. In addition, link the negative Battery Cable and run the diagnostic scanner tool to ensure you avoid the Diagnostic Trouble Code (DTC) when reprogramming your PCM with the correct Identification Number (VIN) and mileage from your vehicle.
Control Module
5094354AF
Q: How to Replace the Engine Control Module on Dodge Dakota?
A:
The first thing to do is to isolate the negative Battery Cable so that you won't damage the new Engine Control Module. For now, remove the ABS CAB to stop problems with DTCs due to the VIN broadcast and once the PCM is changed, use a diagnostic scan tool to insert the VIN to the new PCM from the main menu by selecting "1." After that, select "Miscellaneous" and then click on "Check VIN." After typing the correct VIN, turn off the ignition and attach the ABS module connector. Program the new PCM using the same identification number (VIN) and mileage the car had originally with a diagnostic scan tool, to prevent a Diagnostic Trouble Code (DTC) from being set. You will find the PCM in the right corner of the engine compartment; unplug all four 38-way cables and remove the three bolts that hold it in place. After that, attach the ground strap and remove the PCM.