How to Service or Replace a Tail Pipe on Dodge Dakota?

Before servicing or changing the tailpipe, put up and support the car, drench the clamp nuts with Mopar Rust Penetrant and leave them that way for 5 minutes. Detach the muffler to tailpipe exhaust clamp, then take off the tailpipe from the front and rear insulators before you remove it. Attach the tailpipe into the muffler and mount the bolts onto the clamp bolt finger tight. Then, hold the tailpipe upright in the insulators and tighten the muffler rear clamp bolts to 47 Nm (35 ft. lbs.). In the end, lower the vehicle, start its engine and pay attention to exhaust leaks and contact between the header and body panels, adjusting where required.

How to Maintain and Fix the Tail Pipe on 3.9L/4.7L Engines on Dodge Dakota?

For service on the tailpipe in 3.9L/4.7L engines, it is best to: raise and support the vehicle, apply Mopar Rust Penetrant to the clamp nuts and wait at least 5 minutes for it to work. After the muffler removal, take off the tailpipe to rear exhaust clamp, remove both front and rear pipe insulators and then detach the tailpipe from the car. Before installation, remove the oxygen sensor connector(s) to keep the harness and sensors safe. Insert the tailpipe into the muffler, then snap on the nuts onto the bolt and tighten them only slightly. Set the tip of the tailpipe in place with insulation, put the flexible tailpipe on and seal it to the underside by tightening the nuts on the muffler rear rack to 47 Nm (35 ft. lbs. of torque). Bring the car down to resting level, turn on the power and check the exhaust system for leaks and for touches with nearby body panels; make any required changes.

OEM Dodge Dakota Tail Pipe

Exhaust Tail Pipe

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

12 Tail Pipes found

View related parts
Dodge Dakota Tail Pipe Part Number: 52855886AA
$388.96 MSRP: $592.00
You Save: $203.04 (35%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Tailpipe - Exhaust; Direct-Fit Exhaust System Kit; Resonator and Pipe Assembly; Tailpipe; Resonator And Tailpipe Exhaust; Tailpipe And Resonator Exhaust
- Replaces: 52013258AE, 52013258AF
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2004-2010 Dodge Dakota | Base, Big Horn, Laramie, Lone Star, SLT, SLT Plus, ST, SXT, Sport, Sport Plus, TRX, TRX4 | 3.7L V6, 4.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS
View related parts
Dodge Dakota Tail Pipe Part Number: 52103251AC
$24.77 MSRP: $143.00
You Save: $118.23 (83%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pipe - Exhaust; Exhaust Tail Pipe; Direct-Fit Exhaust; Exhaust System Kit; Exhaust Pipe; Tailpipe
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2000-2003 Dodge Dakota | Base, SLT, Sport | 6 Cyl 3.9 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.9 L GAS
View related parts
Dodge Dakota Tail Pipe Part Number: 68030989AA
$314.97 MSRP: $469.00
You Save: $154.03 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Tailpipe - Exhaust; Exhaust Tail Pipe; Exhaust Resonator and Pipe Assembly; Resonator Assembly; Exhaust Pipe; Tailpipe; Resonator And Tailpipe Exhaust; Tailpipe And Resonator Exhaust
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2010 Dodge Dakota | Big Horn, Laramie, Lone Star, SLT, ST, SXT, Sport, TRX, TRX4 | 8 Cyl 4.7 L FLEX
View related parts
Dodge Dakota Tail Pipe Part Number: 52022001AB
$111.32 MSRP: $164.00
You Save: $52.68 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pipe - Exhaust; Exhaust Tail Pipe; Direct-Fit Exhaust; Exhaust System Kit; Exhaust Pipe; Tailpipe Exhaust
- Replaced by: 52022001AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1997-2000 Dodge Dakota | Base, R/T, SLT, Sport | 4 Cyl 2.5 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS
View related parts
Dodge Dakota Tail Pipe Part Number: E0045333
Product Specifications
- Other Name: Pipe - Tail; Exhaust Pipe; Tailpipe
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1994-1996 Dodge Dakota | Base, SLT, Sport, WS | 6 Cyl 3.9 L GAS, 8 Cyl 5.2 L CNG, 8 Cyl 5.2 L GAS
View related parts
Dodge Dakota Muffler Part Number: E0022740
Product Specifications
- Other Name: Muffler And Tailpipe Assembly; Resonator; Muffler Assembly
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1992-1993 Dodge Dakota | Base, LE, S, Sport | 6 Cyl 3.9 L GAS, 8 Cyl 5.2 L GAS
View related parts
Dodge Dakota Tail Pipe Part Number: 52103250AC
Product Specifications
- Other Name: Pipe - Exhaust; Exhaust Tail Pipe; Direct-Fit Exhaust; Exhaust System Kit; Exhaust Pipe; Tailpipe; Tailpipe Exhaust
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2000-2003 Dodge Dakota | Base, SLT, Sport | 6 Cyl 3.9 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.9 L GAS
View related parts
Dodge Dakota Tail Pipe Part Number: 52013532AB
Product Specifications
- Other Name: Pipe - Exhaust; Direct-Fit Exhaust; Exhaust System Kit; Exhaust Tail Pipe; Exhaust Pipe
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2004 Dodge Dakota | SLT, SLT Plus, Sport, Sport Plus | 8 Cyl 4.7 L GAS
View related parts
Dodge Dakota Tail Pipe Part Number: 52022001AD
Product Specifications
- Other Name: Pipe - Exhaust; Exhaust Tail Pipe; Direct-Fit Exhaust; Exhaust System Kit; Exhaust Pipe; Tailpipe; Tailpipe Exhaust
- Replaces: 52022001AC, 52022001AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1997-2003 Dodge Dakota | Base, R/T, SLT, SXT, Sport | 2.5L L4, 3.9L V6, 4 Cyl 2.5 L GAS, 4.7L V8, 6 Cyl 3.9 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS
View related parts
Dodge Dakota Tail Pipe Part Number: 52103040AD
Product Specifications
- Other Name: Pipe - Exhaust; Exhaust Tail Pipe; Direct-Fit Exhaust; Exhaust System Kit; Exhaust Pipe; Tailpipe; Tailpipe Exhaust
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1997-2003 Dodge Dakota | Base, SLT, SXT, Sport | 6 Cyl 3.9 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.2 L GAS
View related parts
Dodge Dakota Tail Pipe Part Number: 52103262AC
Product Specifications
- Other Name: Pipe - Tail; Exhaust Tail Pipe; Direct-Fit Exhaust; Exhaust System Kit; Exhaust Pipe; Tailpipe; Pipe Tail
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2000-2003 Dodge Dakota | R/T, SLT, Sport | 8 Cyl 5.9 L GAS
View related parts
Dodge Dakota Catalytic Converter Part Number: 52013550AB
Product Specifications
- Other Name: Converter - Exhaust; Exhaust Tail Pipe; Converter; Tailpipe
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2005 Dodge Dakota | Laramie, SLT, ST, Sport | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L GAS

Dodge Dakota Tail Pipe

Choose OEM Tail Pipe that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each Tail Pipe follows strict manufacturing steps to lock in quality and fit. If your Dodge Dakota matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Dakota parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

Dodge Dakota Tail Pipe is among the exhaust system parts of the car and highly crafted in a special way to direct exhaust emissions from the engine part of the car to the rear of the automobile, thus emitting such gases efficiently in the atmosphere. The result of general excellence, the Dodge Dakota Tail Pipe is an essential major part of Dakota as it improves its efficacy and safety. Multiple styles and materials of the Tail Pipe are compatible with Dakota models, and the materials range from stainless steel, chrome plating, and aluminum billet. The alternatives provided by Dakota are round, angle cut and the half moon and dual split oval which makes the appearance of the furniture unique to the owner's choice. The Tail Pipe component can also come with polished, brushed or black surface and some consist of logos or flame patterns. Of particular and worthy of note, is that the Dodge Dakota Tail Pipe plays a dynamic role in influencing the performance of the vehicle since the exteriors of the car; such as the tail pipe, influence the exhaust system which has effects on fuel efficiency and emissions. Therefore, the Dodge Tail Pipe is highly unique for the integration of form and function in the automotive market. For people interested in the Dodge Dakota, the Dodge Tail Pipe improves the performance of the truck just as it also comes very solid and well designed, thus adding to the reliability of the Dakota trucks.

Dodge Dakota Tail Pipe Parts and Q&A

Tail Pipe
52022001AD
Q: How to Service or Replace a Tail Pipe on Dodge Dakota?
A:
Before servicing or changing the tailpipe, put up and support the car, drench the clamp nuts with Mopar Rust Penetrant and leave them that way for 5 minutes. Detach the Muffler to tailpipe exhaust clamp, then take off the tailpipe from the front and rear insulators before you remove it. Attach the tailpipe into the muffler and mount the bolts onto the clamp bolt finger tight. Then, hold the tailpipe upright in the insulators and tighten the muffler rear clamp bolts to 47 Nm (35 ft. lbs.). In the end, lower the vehicle, start its engine and pay attention to exhaust leaks and contact between the header and body panels, adjusting where required.
Tail Pipe
52103251AC
Q: How to Maintain and Fix the Tail Pipe on 3.9L/4.7L Engines on Dodge Dakota?
A:
For service on the tailpipe in 3.9L/4.7L engines, it is best to: raise and support the vehicle, apply Mopar Rust Penetrant to the clamp nuts and wait at least 5 minutes for it to work. After the Muffler removal, take off the tailpipe to rear exhaust clamp, remove both front and rear pipe insulators and then detach the tailpipe from the car. Before installation, remove the oxygen sensor connector(s) to keep the harness and sensors safe. Insert the tailpipe into the muffler, then snap on the nuts onto the bolt and tighten them only slightly. Set the tip of the tailpipe in place with insulation, put the flexible tailpipe on and seal it to the underside by tightening the nuts on the muffler rear rack to 47 Nm (35 ft. lbs. of torque). Bring the car down to resting level, turn on the power and check the exhaust system for leaks and for touches with nearby body panels; make any required changes.