How to Replace the Engine Control Module on Dodge Durango?

Remove the negative battery cable and be sure the ignition key is turned off. Remove the ABS CAB for a short time if you experience issues with DTCs linked to the VIN broadcast. Following the PCM switch, use the scan tool to input the VIN to the new module by picking item 1 from the main menu. Check "Miscellaneous," "Check VIN" and make sure the VIN looks correct before turning off your car and reattaching the ABS connector. Take apart both wiper arms, unscrew the two screws and remove the four pins from the wiper cowl and remove three bolts from the wiper cowl support. Then, go ahead by releasing four nuts to get the air intake tube off and using care, unplug the four 38-way connectors from the PCM assembly. Now declare the PCM mounting bolts and take the PCM out of the vehicle. Always use the original VIN and mileage to reprogram the PCM with the scan tool to prevent code setting.

How to Install the Engine Control Module and Ensure It Is Properly Programmed to Prevent Diagnostic Trouble Codes on Dodge Durango?

Do not forget to remove the ABS CAB for a moment, since if you don't, the DTCs could be caused by the VIN license failing to transfer. With the engine on, verify Miscellaneous then Check VIN to ensure you have the hunt VIN checked and the risk level updated, then turn off the truck and restore the ABS module connection. Make sure to input the car's original VIN and mileage into the new PCM by using the scan tool which should help prevent a Diagnostic Trouble Code. Grip the board near its edge and place the PCM inside the vehicle. Use three bolts to attach the board, tightening them between 3 and 5 Nm (30 and 40 in. lbs.). Look at the pin connectors on the PCM and check each of the four 38-way connectors for damage or corrosion and fix or replace them if necessary before connecting them to the PCM. At this point, fit the air intake tube using four nuts, the wiper cowl support using three bolts, the wiper cowl with two screws and four pins and both wiper arms. Next, plug in the negative battery cable to finish the job and check that the PCM is updated with the initial VIN and mileage to prevent DTCs.

OEM Dodge Durango Engine Control Module

Engine Control Computer

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

77 Engine Control Modules found

View related parts
Dodge Durango Control Module Part Number: 68243322AB
$856.79 MSRP: $1290.00
You Save: $433.21 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Module - Engine Controller; Engine Control Module; ECM
- Replaces: 68243322AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2016-2017 Dodge Durango | Citadel, GT, Limited, R/T, SXT, Special Service | 5.7L V8, 6 Cyl 3.6 L FLEX, 8 Cyl 5.7 L GAS
View related parts
Dodge Durango Transmission Controller Part Number: 5150283AB
$794.91 MSRP: $1195.00
You Save: $400.09 (34%)
ADD TO CART
Product Specifications
- Other Name: Module - Powertrain Control; Engine Control Module; Transmission Control Module; ECM; Module Powertrain Control Generic
- Replaces: RL150283AB, 5150283AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2009 Dodge Durango | Adventurer, Limited, SLT | 5.7L V8, 8 Cyl 5.7 L GAS
View related parts
Dodge Durango Control Module Part Number: 5150927AB
$778.34 MSRP: $1185.00
You Save: $406.66 (35%)
ADD TO CART
Product Specifications
- Other Name: Module - Powertrain Control; Engine Control Module; ECM; Module Powertrain Control Generic
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2015 Dodge Durango | Citadel, Limited, R/T, Special Service | 8 Cyl 5.7 L GAS
View related parts
Dodge Durango Control Module Part Number: 68243326AB
$486.96 MSRP: $710.00
You Save: $223.04 (32%)
ADD TO CART
Product Specifications
- Other Name: Module - Engine Controller; Engine Control Module; ECM
- Replaces: 68243326AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2016-2017 Dodge Durango | Citadel, Limited, SXT, Special Service | 3.6L V6, 6 Cyl 3.6 L FLEX
View related parts
Dodge Durango Control Module Part Number: 5150790AC
$718.25 MSRP: $1050.00
You Save: $331.75 (32%)
ADD TO CART
Product Specifications
- Other Name: Module - Powertrain Control; Engine Control Module; PCM; ECM; Module Powertrain Control Generic
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2014 Dodge Durango | Citadel, Limited, Rallye, SXT, Special Service | 6 Cyl 3.6 L FLEX
View related parts
Dodge Durango Module - Engine Controller Part Number: 68615040AA
$446.55 MSRP: $653.00
You Save: $206.45 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: MODULE-ENGINE CONTROLLER
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2024-2025 Dodge Durango | Citadel, Pursuit, R/T, R/T Plus, R/T Premium, Special Service | 8 Cyl 5.7 L GAS
View related parts
Dodge Durango Control Module Part Number: 68434934AC
$566.87 MSRP: $861.00
You Save: $294.13 (35%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Module - Engine Controller; Engine Control Module; ECM
- Replaces: 68434934AA, 68434934AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2020-2024 Dodge Durango | Citadel, Pursuit, R/T, R/T Hemi Orange, R/T Plus, R/T Premium, SRT, SRT 392, SRT 392 Plus, SRT 392 Premium, Special Service | 5.7L V8, 6.4L V8, 8 Cyl 5.7 L GAS, 8 Cyl 6.4 L GAS
View related parts
Dodge Durango Transmission Controller Part Number: 5094355AF
$710.93 MSRP: $1080.00
You Save: $369.07 (35%)
ADD TO CART
Product Specifications
- Other Name: Module - Powertrain Control; Engine Control Module; Transmission Control Module; ECM
- Replaces: 5094355AC, 5094355AB, 5094355AD, RL094355AF, 5094355AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007 Dodge Durango | Adventurer, Limited, SLT, SXT | 5.7L V8, 8 Cyl 5.7 L GAS
View related parts
Dodge Durango Control Module Part Number: 5150987AB
$725.30 MSRP: $1105.00
You Save: $379.70 (35%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Module - Powertrain Control; Engine Control Module; ECM; Module Powertrain Control Generic
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2015 Dodge Durango | Citadel, Limited, Rallye, SXT, Special Service | 6 Cyl 3.6 L FLEX
View related parts
Dodge Durango Control Module Part Number: 5150275AB
$730.82 MSRP: $1110.00
You Save: $379.18 (35%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Module - Powertrain Control; Engine Control Module; Transmission Control Module; Transmission Controller; PCM; ECM; Module Powertrain Control Generic
- Replaces: 5150248AC, 5150275AA, RL150275AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008 Dodge Durango | SLT, SXT | 3.7L V6, 6 Cyl 3.7 L GAS
View related parts
Dodge Durango Transmission Controller Part Number: 5150281AB
$939.67 MSRP: $1430.00
You Save: $490.33 (35%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Module - Powertrain Control; Engine Control Module; Transmission Control Module; ECM; Module Powertrain Control Generic
- Replaces: RL150281AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2009 Dodge Durango | Adventurer, Limited, SE, SLT, SXT | 4.7L V8, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS
View related parts
Dodge Durango Module - Engine Controller Part Number: 68615039AA
$431.67 MSRP: $631.00
You Save: $199.33 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: MODULE-ENGINE CONTROLLER
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2024-2025 Dodge Durango | Citadel, GT, GT Plus, GT Premium, Pursuit, SXT, SXT Plus | 6 Cyl 3.6 L GAS
View related parts
Dodge Durango Control Module Part Number: 5150816AB
$742.30 MSRP: $1095.00
You Save: $352.70 (33%)
Product Specifications
- Other Name: Module - Powertrain Control; Engine Control Module; PCM; ECM; Module Powertrain Control Generic
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2014 Dodge Durango | Citadel, Limited, R/T, Special Service | 8 Cyl 5.7 L GAS
View related parts
Dodge Durango Control Module Part Number: 5150650AB
Product Specifications
- Other Name: Module - Powertrain Control; Engine Control Module; ECM; Module Powertrain Control Generic
- Replaces: RL150650AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2012-2013 Dodge Durango | Citadel, Crew, SXT, Special Service | 3.6L V6, 6 Cyl 3.6 L FLEX
View related parts
Dodge Durango Transmission Controller Part Number: RL094354AF
Product Specifications
- Other Name: Module - Powertrain Control; Transmission Control Module; Engine Control Module; ECM; Module Powertrain Control Generic
- Replaced by: 5094354AF
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007 Dodge Durango | Adventurer, Limited, SLT, SXT
View related parts
Dodge Durango Control Module Part Number: 5094354AF
Product Specifications
- Other Name: Module - Powertrain Control; Engine Control Module; ECM
- Replaces: 5094354AD, 5094354AC, 5094354AE, RL094354AF
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007 Dodge Durango | Adventurer, Limited, SLT, SXT | 4.7L V8, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS
View related parts
Dodge Durango Control Module Part Number: R6029080AC
Product Specifications
- Other Name: Module - Powertrain Control; Engine Control Module; ECM; Module Powertrain Control Generic
- Replaces: 56029080AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2005 Dodge Durango | Limited, SLT, ST, SXT | 4.7L V8, 8 Cyl 4.7 L GAS
View related parts
Dodge Durango Control Module Part Number: R6044743AD
Product Specifications
- Other Name: Module - Powertrain Control; Engine Control Module (ECM); Engine Control Module; ECM; Module Powertrain Control Generic
- Replaces: 56044749AC, 56044752AC, RL044743AD, 56044743AD, 56044743AC, 56044743AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006 Dodge Durango | Adventurer, Limited, SLT, SXT | 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS
View related parts
Dodge Durango ECM Part Number: R6029146AC
Product Specifications
- Other Name: Module - Powertrain Control; Engine Control Module; Module Powertrain Control Generic
- Replaces: 56030040AD, 56029039AC, 56030040AB, 56030040AC, 56029039AB, 56029146AC, 56029039AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2004 Dodge Durango | Limited, SLT | 5.7L V8, 8 Cyl 5.7 L GAS
View related parts
Dodge Durango Control Module Part Number: 5150582AC
$649.22 MSRP: $951.00
You Save: $301.78 (32%)
Product Specifications
- Other Name: Module - Powertrain Control; Engine Control Module; ECM; Module Powertrain Control Generic
- Replaces: 5150582AB, RL150582AC, R5150582AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011 Dodge Durango | Citadel, Crew, R/T | 5.7L V8, 8 Cyl 5.7 L GAS

| Page 1 of 4 |Next >

1-20 of 77 Results

Dodge Durango Engine Control Module

Choose OEM Engine Control Module that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each Engine Control Module follows strict manufacturing steps to lock in quality and fit. If your Dodge Durango matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Durango parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

Indeed, the Dodge Durango Engine Control Module (ECM) is regarded as one of the best, as it is a part of the vehicle's electrical system relied on as the engine's electronic control unit that maps all the necessary procedures for the efficient performance of the vehicle across the different models of Dodge Durango. This DME better known as the Engine Control Module or electronic control unit handle fuel and air supply in the engine cylinders to improve combustion and immense power. The Dodge Durango ECM manages the ignition timing and the air-fuel ratio this making it one of the most important parts in Durango as it enhances efficiency as well as safety. Designed to fit many Durango generations, the Engine Control Module is supplied with new or in various conditions of remanufacturing and all control units have direct fit parts for installation. Surprisingly, the ECM can be tuned for better performance and this suits modified vehicles' needs. Some of the key aspects of Dodge Durango ECM for instance it can regulate the idle speed and orderly valve timing hence improving on the power output depending on the driving conditions. The third generation Durango, especially with choice of potent engines, owe much to these enhanced abilities of the ECM that any driver gets the best of power and smoothness. In summary, Dodge Durango Engine Control Module is one of the most important aspects that distinguishes this automobile in the global market for various automobiles since it significantly modifies the driving experience that the consumer is bound to relish.

Dodge Durango Engine Control Module Parts and Q&A

Transmission Controller
5094355AF
Q: How to Replace the Engine Control Module on Dodge Durango?
A:
Remove the negative battery cable and be sure the ignition key is turned off. Remove the ABS CAB for a short time if you experience issues with DTCs linked to the VIN broadcast. Following the PCM switch, use the scan tool to input the VIN to the new module by picking item 1 from the main menu. Check "Miscellaneous," "Check VIN" and make sure the VIN looks correct before turning off your car and reattaching the ABS connector. Take apart both Wiper Arms, unscrew the two screws and remove the four pins from the wiper cowl and remove three bolts from the wiper cowl support. Then, go ahead by releasing four nuts to get the air intake tube off and using care, unplug the four 38-way connectors from the PCM assembly. Now declare the PCM mounting bolts and take the PCM out of the vehicle. Always use the original VIN and mileage to reprogram the PCM with the scan tool to prevent code setting.
Control Module
5094354AF
Q: How to Install the Engine Control Module and Ensure It Is Properly Programmed to Prevent Diagnostic Trouble Codes on Dodge Durango?
A:
Do not forget to remove the ABS CAB for a moment, since if you don't, the DTCs could be caused by the VIN license failing to transfer. With the engine on, verify Miscellaneous then Check VIN to ensure you have the hunt VIN checked and the risk level updated, then turn off the truck and restore the ABS module connection. Make sure to input the car's original VIN and mileage into the new PCM by using the scan tool which should help prevent a Diagnostic Trouble Code. Grip the board near its edge and place the PCM inside the vehicle. Use three bolts to attach the board, tightening them between 3 and 5 Nm (30 and 40 in. lbs.). Look at the pin connectors on the PCM and check each of the four 38-way connectors for damage or corrosion and fix or replace them if necessary before connecting them to the PCM. At this point, fit the air intake tube using four nuts, the wiper cowl support using three bolts, the wiper cowl with two screws and four pins and both Wiper Arms. Next, plug in the negative battery cable to finish the job and check that the PCM is updated with the initial VIN and mileage to prevent DTCs.