How to Properly Install a Rear Engine Mount with Threadlocking Compound on Dodge Durango?

Before fitting the rear engine mount, begin by applying threadlocking to the bolts. Install the two bolts that go between the transmission mount and bracket, applying 61 Nm (45 ft.lbs.) torque to them. After that, slowly move the transmission down until the transmission mount rests atop the crossmember, checking that the studs fit well into each slot. After that, insert the nuts onto the transmission mount studs using the clearance alongside the crossmember and tighten them to 54 Nm (40 ft.lbs.).

How to Service and Repair a Front Engine Mount on Dodge Durango?

Remove the negative cable from the battery to begin on the front engine mount service. If your engine has a viscous fan, remove it ahead of engine lifting to stop damage to the fan blade, fan clutch and the fan shroud. If your car is 2WD, detach the cooling fan, the engine oil filter and oil drain trough and then add the Engine Support 8534. Subsequently, take away the through bolts, lift the engine up enough to see both the engine mounts, then take out the bolts attaching the engine mounts and remove them. When working on a 4WD, also take care of the initial steps-disconnect the battery and remove the cooling fan. The next step is to take out the skid plate, front crossmember, oil filter and the drain trough for engine oil. Lift the front axle by inserting a suitable jack, secure Engine Support 8534 beneath it and undo the bolts that connect the engine supports and the front axle to the left engine bracket. Remove the front axle, unscrew the through bolts and-if there's a fan-remove that fan before lifting the engine. This will allow you to work on the left and right engine mounts and take out their screws.

OEM Dodge Durango Engine Mount

Engine Motor Mount

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

61 Engine Mounts found

View related parts
Dodge Durango Mount Bracket, Driver Side Part Number: 68275987AA
$82.26 MSRP: $169.00
You Save: $86.74 (52%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket - Engine Mount; Engine Mount Bracket, Left; Motor Mount; Bracket Engine Mount; Engine Mount Bracket
- Position: Driver Side
- Replaces: 52124989AC, 52124989AD, 52124989AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2025 Dodge Durango | Citadel, Crew, Limited, Pursuit, R/T, R/T Hemi Orange, R/T Plus, R/T Premium, SRT, SRT 392, SRT 392 Plus, SRT 392 Premium, SRT Hellcat, SRT Hellcat Plus, SRT Hellcat Premium, Special Service | 5.7L V8, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 6.4 L GAS
View related parts
Dodge Durango Transmission Mount Part Number: 5154807AE
$114.24 MSRP: $152.00
You Save: $37.76 (25%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Insulator - Transmission Mount; Automatic Transmission Mount; Transfer Case Mount; Mount; Isolator Transmission Mount
- Replaces: 5154807AD, 5154807AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2014-2025 Dodge Durango | Citadel, GT, GT Plus, GT Premium, Limited, Pursuit, R/T, R/T Hemi Orange, R/T Plus, R/T Premium, Rallye, SXT, SXT Plus, Special Service | 3.6L V6, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 8 Cyl 5.7 L GAS
View related parts
Dodge Durango Transmission Mount Part Number: 68110244AE
$62.33 MSRP: $93.40
You Save: $31.07 (34%)
ADD TO CART
Product Specifications
- Other Name: Insulator - Transmission Mount; Automatic Transmission Mount; Transfer Case Mount; Isolator Transmission Mount
- Replaces: 68110244AC, 68110244AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2014-2025 Dodge Durango | 5.7L V8, 6.4L V8
View related parts
Dodge Durango Transmission Mount Part Number: 68032661AF
$75.65 MSRP: $114.00
You Save: $38.35 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Isolator - Transmission Mount; Automatic Transmission Mount; Transfer Case Mount
- Replaces: 68032661AD, 68032661AC, 68032661AE, 68032662AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2014 Dodge Durango | Citadel, Crew, Express, Heat, Limited, Rallye, SXT, Special Service | 3.6L V6, 6 Cyl 3.6 L FLEX
View related parts
Dodge Durango Front Mount Part Number: 5038548AC
$165.08 MSRP: $247.00
You Save: $81.92 (34%)
ADD TO CART
Product Specifications
- Other Name: Isolator - Engine Mount; Engine Mount; Engine Mount Bracket; Motor Mount; Mount; Isolator; Isolator Engine Mount
- Replaces: 5038548AB, 5038548AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2018-2024 Dodge Durango | SRT, SRT 392, SRT 392 Plus, SRT 392 Premium | 8 Cyl 6.4 L GAS
View related parts
Dodge Durango Bracket, Driver Side Part Number: 68252524AA
$48.17 MSRP: $70.80
You Save: $22.63 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket - Engine Mount; Engine Mount Bracket, Left; Motor Mount; Bracket Engine Mount
- Position: Driver Side
- Replaces: 52124987AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2025 Dodge Durango | Citadel, Crew, Express, GT, GT Plus, GT Premium, Heat, Limited, Pursuit, Rallye, SXT, SXT Plus, Special Service | 3.6L V6, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
Dodge Durango Front Mount Part Number: 68252522AA
$106.11 MSRP: $159.00
You Save: $52.89 (34%)
ADD TO CART
Product Specifications
- Other Name: Insulator - Engine Mount; Engine Mount; Engine Mount Bracket; Motor Mount; Mount; Isolator; Isolator Engine Mount
- Replaced by: 68252522AB
- Replaces: 68110951AC, 68110951AB, 68110951AA, 52124675AG
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2013-2025 Dodge Durango | Citadel, Crew, GT, Limited, Pursuit, R/T, R/T Hemi Orange, R/T Plus, R/T Premium, SXT, Special Service | 8 Cyl 5.7 L GAS
View related parts
Dodge Durango Front Mount, Rear Part Number: 52021614AA
$51.60 MSRP: $94.95
You Save: $43.35 (46%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Insulator - Engine Mount; Engine Mount, Rear; Engine Mount Torque Strut; Engine Mount Bracket; Motor Mount; Rear Insulator; Insulator Engine Mount
- Position: Rear
- Replaces: 52855458AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2004-2007 Dodge Durango | Adventurer, Limited, SLT, ST, SXT | 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
Dodge Durango Front Mount, Driver Side Part Number: 52855843AD
$48.54 MSRP: $98.50
You Save: $49.96 (51%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Insulator - Engine Mount; Engine Mount, Front Left; Engine Mount Bracket; Motor Mount; Front Insulator; Mount; Insulator Engine Mount
- Position: Front Driver Side
- Replaces: 52855843AB, 52855843AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2009 Dodge Durango | Adventurer, Limited, SE, SLT | 5.7L V8, 8 Cyl 5.7 L GAS
View related parts
Dodge Durango Transmission Mount Bracket Part Number: 68275990AA
$148.24 MSRP: $222.00
You Save: $73.76 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket - Transmission Mount; Automatic Transmission Mount Bracket; Transfer Case Mount; Bracket Transmission Mount; Transmission Mount
- Replaces: 68103009AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2014-2025 Dodge Durango | Citadel, Limited, Pursuit, R/T, R/T Hemi Orange, R/T Plus, R/T Premium, Rallye, SXT, Special Service | 5.7L V8, 6 Cyl 3.6 L FLEX, 8 Cyl 5.7 L GAS
View related parts
Dodge Durango Transmission Mount Bracket Part Number: 68275992AA
$266.26 MSRP: $391.00
You Save: $124.74 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket - Transmission Mount; Automatic Transmission Mount Bracket; Transfer Case Mount; Bracket Transmission Mount; Transmission Mount
- Replaces: 68185207AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2014-2025 Dodge Durango | Citadel, GT, GT Plus, GT Premium, Limited, Pursuit, SXT, SXT Plus, Special Service | 3.6L V6, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
Dodge Durango Transmission Mount Part Number: 68032665AF
$67.29 MSRP: $101.00
You Save: $33.71 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Isolator - Transmission Mount; Automatic Transmission Mount; Transfer Case Mount; Isolator Transmission Mount
- Replaces: 68032665AD, 68032665AE, 68032666AC, 68032665AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2025 Dodge Durango | Citadel, Crew, Limited, Pursuit, R/T, R/T Hemi Orange, R/T Plus, R/T Premium, Special Service | 5.7L V8, 8 Cyl 5.7 L GAS
View related parts
Dodge Durango Transmission Support Part Number: 68252525AA
$356.10 MSRP: $519.00
You Save: $162.90 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Crossmember - Transmission; Transmission Crossmember; Transfer Case Mount; Trans Crossmember; Crossmember Transmission
- Replaces: 68110245AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2014-2025 Dodge Durango | Citadel, GT, GT Plus, GT Premium, Limited, Pursuit, R/T, R/T Hemi Orange, R/T Plus, R/T Premium, Rallye, SRT, SRT 392, SRT 392 Plus, SRT 392 Premium, SXT, SXT Plus, Special Service | 3.6L V6, 5.7L V8, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.4 L GAS
View related parts
Dodge Durango Transmission Mount Bracket Part Number: 68308876AB
$559.91 MSRP: $816.00
You Save: $256.09 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Crossmember - Transmission; Transmission Crossmember; Transfer Case Mount; Transmission Mount; Transmission Support; Trans Crossmember; Crossmember Transmission
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2023-2025, 2021 Dodge Durango | SRT Hellcat, SRT Hellcat Plus, SRT Hellcat Premium | 8 Cyl 6.2 L GAS
View related parts
Dodge Durango Mount Bracket, Front Part Number: 52021709AB
$16.67 MSRP: $23.95
You Save: $7.28 (31%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket - Engine Mount; Engine Mount Bracket; Engine Mount, Front; Motor Mount; Valve Grind Gasket Kit; Lower Gasket Kit; Front Insulator; Bracket Engine Mount
- Position: Front
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2004-2009 Dodge Durango | Adventurer, Limited, SE, SLT, ST, SXT | 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS
View related parts
Dodge Durango Transmission Support, Passenger Side Part Number: 4578782AB
$29.35 MSRP: $42.25
You Save: $12.90 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket - Transmission Crossmember; Right Transmission Crossmember Bracket & Brace; Transmission & Motor Mount.; Bracket; Bracket Transmission Crossmember
- Position: Passenger Side
- Replaces: 4578782AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2025 Dodge Durango | Citadel, Crew, Express, GT, GT Plus, GT Premium, Heat, Limited, Pursuit, R/T, R/T Hemi Orange, R/T Plus, R/T Premium, Rallye, SRT, SRT 392, SRT 392 Plus, SRT 392 Premium, SRT Hellcat, SRT Hellcat Plus, SRT Hellcat Premium, SXT, SXT Plus, Special Service | 3.6L V6, 5.7L V8, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 6.4 L GAS
View related parts
Dodge Durango Mount Bracket, Passenger Side Part Number: 52021638AA
Product Specifications
- Other Name: Bracket - Engine Mount; Engine Mount Bracket, Front Right, Right; Motor Mount; Front Bracket; Bracket Engine Mount; Engine Mount Bracket
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2004-2009 Dodge Durango | Adventurer, Limited, SE, SLT, ST, SXT | 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS
View related parts
Dodge Durango Side Mount Part Number: 68252518AA
$83.05 MSRP: $126.00
You Save: $42.95 (35%)
Product Specifications
- Other Name: Insulator - Engine Mount; Engine Mount; Engine Mount Bracket; Motor Mount; Front Mount; Mount; Isolator; Isolator Engine Mount
- Replaced by: 68252518AB
- Replaces: 52124671AF, 68110950AC, 68110950AA, 68110950AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2013-2025 Dodge Durango | Citadel, Crew, GT, GT Plus, GT Premium, Limited, Pursuit, Rallye, SXT, SXT Plus, Special Service | 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
Dodge Durango Front Mount, Passenger Side Part Number: 52020244AA
Product Specifications
- Other Name: Insulator - Engine Mount; Engine Mount, Rear Right, Right; Engine Mount Torque Strut; Engine Mount Bracket; Motor Mount; Rear Insulator; Front Insulator; Insulator Engine Mount
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2000-2003 Dodge Durango | Base, R/T, SLT, SLT Plus, SXT, Sport | 8 Cyl 4.7 L GAS, 8 Cyl 5.9 L GAS
View related parts
Dodge Durango Front Mount, Driver Side Part Number: 52021633AA
Product Specifications
- Other Name: Insulator - Engine Mount; Engine Mount, Left; Engine Mount Bracket; Motor Mount; Front Insulator; Insulator Engine Mount
- Position: Driver Side
- Replaces: 52855455AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2004-2007 Dodge Durango | Adventurer, Limited, SLT, ST, SXT | 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS

| Page 1 of 4 |Next >

1-20 of 61 Results

Dodge Durango Engine Mount

Choose OEM Engine Mount that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each Engine Mount follows strict manufacturing steps to lock in quality and fit. If your Dodge Durango matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Durango parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

The Engine Mount in Dodge Durango vehicles serves two primary functions: It muffles noise causing from the operation of the engine, while at the same time offering support and retaining the position of the engine with the chassis. This is important in achieving these objectives because slick roads can cause slippage thereby affecting the comfort and safety of the car as well as the efficiency of the vehicle's components. Engine Mounts that have been used on Dodge Durango models include the conventional rubber Engine Mounts, fluid filled hydraulic Engine Mounts and recently developed electronic active Engine Mounts. Constructional mounts are made of metal parts sandwiched in between rubber layers whereas hydraulic type incorporates greater amount of damping. New active mounts latest active mounts vary the degrees of stiffness depending on the engine's RPM for the optimal performance. Dodge Durango Engine Mounts can end up getting weak from age, heat or simply get damaged by fluids and as a result, they may become spongy or they may start leaking. Their importance is evident in the effective working of the car hence they should be inspected from time to time to check their structural soundness.

Dodge Durango Engine Mount Parts and Q&A

Mount Bracket, Passenger Side
52021636AB
Q: How to Properly Install a Rear Engine Mount with Threadlocking Compound on Dodge Durango?
A:
Before fitting the rear engine mount, begin by applying threadlocking to the bolts. Install the two bolts that go between the Transmission Mount and bracket, applying 61 Nm (45 ft.lbs.) torque to them. After that, slowly move the transmission down until the transmission mount rests atop the crossmember, checking that the studs fit well into each slot. After that, insert the nuts onto the transmission mount studs using the clearance alongside the crossmember and tighten them to 54 Nm (40 ft.lbs.).
Mount Bracket, Passenger Side
52021638AA
Q: How to Service and Repair a Front Engine Mount on Dodge Durango?
A:
Remove the negative cable from the battery to begin on the front engine mount service. If your engine has a viscous fan, remove it ahead of engine lifting to stop damage to the Fan Blade, Fan Clutch and the fan shroud. If your car is 2WD, detach the cooling fan, the engine Oil Filter and oil drain trough and then add the Engine Support 8534. Subsequently, take away the through bolts, lift the engine up enough to see both the engine mounts, then take out the bolts attaching the engine mounts and remove them. When working on a 4WD, also take care of the initial steps-disconnect the battery and remove the cooling fan. The next step is to take out the skid plate, front crossmember, oil filter and the drain trough for engine oil. Lift the front axle by inserting a suitable jack, secure Engine Support 8534 beneath it and undo the bolts that connect the engine supports and the front axle to the left engine bracket. Remove the front axle, unscrew the through bolts and-if there's a fan-remove that fan before lifting the engine. This will allow you to work on the left and right engine mounts and take out their screws.