How to Install a Camshaft on the Left Side on Dodge Durango?

Begin by rubbing clean engine oil on the journals of the left camshaft and arrange it so that the sprocket dowel is close to the 1 o'clock position while standing at its neutral position. Place the camshaft in the cylinder head and fit the bearing caps, holding the retaining bolts in position until they are all securely tightened and the stamped numbers from the bearing caps are in numerical order starting from the front of the engine. Starts with the middle bearing cap, turn the retaining bolts 1/2 turn, move to the next cap and torque them to 11 Nm (100 in. lbs.). Bring the camshaft drive gear alongside the timing chain and adjust them together so that both V6 marks appear between the chains. Reach under the camshaft with the Tool 8428 Camshaft wrench and turn the camshaft clockwise until the dowel on the sprocket fits in the slot. Finally, label the sprocket face and attach it down onto the camshaft. Be sure to wipe away extra oil from the sprocket bolt, so it doesn't cause the bolt to break. After that, tighten the retaining bolt by hand only. Once you remove Special Tool 8379 timing chain wedge, put Special Tool 6958 spanner wrench with adapter pins 8346 on the sprocket retaining bolt and tighten it to 122 Nm (90 ft. lbs.). After that, set the cylinder head cover in place.

How to Safely Remove a Camshaft Without Causing Damage on Dodge Durango?

Don't try to move the timing chain by itself when you are removing the camshaft to avoid serious harm to the valves or pistons. When taking out the cam sprocket, timing chains or camshaft, use Wedge Locking Tool 8379 so you don't overextend the hydraulic tensioner ratchet. Take off the cylinder head cover, then place the engine at TDC to No. 1 and make the camshaft sprocket V6 marks point to the 12 o'clock position. Put a mark on the secondary timing chain's middle link located on either side of the V6 mark found on the surface of the camshaft sprocket for use during installation. Take out enough slack in the bolt to move the sprocket, but keep it in place on the camshaft. Make sure the timing chain tensioners are secure before taking off the camshaft sprockets, so the tension limiters do not extend and you don't have to remove the timing chain cover. Pull and snap Locking Wedge Tool 8379 between the timing chain strands and tap it to secure the chain against the tensioners while not pushing it past the tightest point between the chains. Grip the camshaft using Spanner Wrench 6958 and Adapter Pins 8346 while you get rid of the camshaft sprocket bolt. Using Camshaft Holder 8428, first remove the sprocket and observe the camshaft rotating 5° clockwise until it stops. Relieve the bearing caps carefully by loosening the bolts that hold the camshaft bearing cap, going inward from the outside. Do not hit or stamp on the bearing caps so you do not damage them. Remember that once the camshaft is gone, the rocker arms can drop. Before removing the bearing caps and the camshaft, find a good place to mark them.

OEM Dodge Durango Camshaft

Cam

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

26 Camshafts found

View related parts
Dodge Durango Camshaft Part Number: 53022065AB
$396.17 MSRP: $582.00
You Save: $185.83 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Camshaft - Engine; Camshaft Engine
- Replaces: 53021731AD, 53021731AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2008 Dodge Durango | Adventurer, Limited, SLT, SXT | 5.7L V8, 8 Cyl 5.7 L GAS
View related parts
Dodge Durango Camshaft Part Number: 53022064AA
$396.17 MSRP: $582.00
You Save: $185.83 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Camshaft - Engine; Camshaft Engine
- Replaces: 53021730BA, 53021730AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2004-2005 Dodge Durango | Limited, SLT, ST | 5.7L V8, 8 Cyl 5.7 L GAS
View related parts
Dodge Durango Camshaft Part Number: 53022372AA
$403.04 MSRP: $592.00
You Save: $188.96 (32%)
ADD TO CART
Product Specifications
- Other Name: Camshaft - Engine; Camshaft Engine
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2025 Dodge Durango | Citadel, Crew, GT, Limited, Pursuit, R/T, R/T Hemi Orange, R/T Plus, R/T Premium, SXT, Special Service | 8 Cyl 5.7 L GAS
View related parts
Dodge Durango Camshaft Part Number: 53021892AC
$411.06 MSRP: $626.00
You Save: $214.94 (35%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Camshaft - Engine; Camshaft Engine Right
- Replaces: 53021892AB, 53021892AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2005-2009 Dodge Durango | SE, SLT, SXT | 3.7L V6, 6 Cyl 3.7 L GAS
View related parts
Dodge Durango Camshaft Part Number: 53022263AF
$398.80 MSRP: $605.00
You Save: $206.20 (35%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Camshaft - Engine; Camshaft Engine
- Replaces: 53022263AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2009 Dodge Durango | Limited, SE, SLT | 8 Cyl 5.7 L GAS
View related parts
Dodge Durango Camshaft Part Number: 53021159AE
$815.24 MSRP: $1190.00
You Save: $374.76 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Camshaft - Engine; Camshaft Engine Left
- Replaced by: 53021159AG
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2003-2007 Dodge Durango | Adventurer, Limited, SLT, SLT Plus, ST, SXT, Sport | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS
View related parts
Dodge Durango Exhaust Camshaft Part Number: 5048030AD
$171.08 MSRP: $257.00
You Save: $85.92 (34%)
ADD TO CART
Product Specifications
- Other Name: Camshaft - Exhaust
- Replaces: 5048030AC, 5048030AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2016-2025 Dodge Durango | Citadel, GT, GT Plus, GT Premium, Limited, Pursuit, SXT, SXT Plus, Special Service | 3.6L V6, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
Dodge Durango Camshaft Part Number: 53021893AC
$586.76 MSRP: $894.00
You Save: $307.24 (35%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Camshaft - Engine; Camshaft Engine Left
- Replaces: 53021893AA, 53021893AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2005-2009 Dodge Durango | SE, SLT, SXT | 3.7L V6, 6 Cyl 3.7 L GAS
View related parts
Dodge Durango Exhaust Camshaft Part Number: 5048029AC
$153.85 MSRP: $231.00
You Save: $77.15 (34%)
ADD TO CART
Product Specifications
- Other Name: Camshaft - Exhaust
- Replaces: 5048029AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2016-2021 Dodge Durango | Citadel, GT, GT Plus, Limited, Pursuit, SXT, SXT Plus, Special Service | 3.6L V6, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
Dodge Durango Exhaust Camshaft Part Number: 5184377AH
$355.81 MSRP: $542.00
You Save: $186.19 (35%)
ADD TO CART
Product Specifications
- Other Name: Camshaft - Exhaust; Camshaft
- Replaces: 5184377AG, 5184377AD, 5184377AF, 5184377AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2015 Dodge Durango | Citadel, Crew, Express, Heat, Limited, Rallye, SXT, Special Service | 3.6L V6, 6 Cyl 3.6 L FLEX
View related parts
Dodge Durango Valve Seals Part Number: 53021984AD
$677.23 MSRP: $894.00
You Save: $216.77 (25%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Camshaft - Engine; Camshaft
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2009 Dodge Durango | Adventurer, Limited, SE, SLT, SXT | 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS
View related parts
Dodge Durango Right Side Intake Camshaft Part Number: 5184380AH
$340.34 MSRP: $520.00
You Save: $179.66 (35%)
ADD TO CART
Product Specifications
- Other Name: Intake Camshaft, Intake
- Replaces: 5184380AE, 5184380AD, 5184380AG, 5184380AF
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2015 Dodge Durango | Citadel, Crew, Express, Heat, Limited, Rallye, SXT, Special Service | 3.6L V6, 6 Cyl 3.6 L FLEX
View related parts
Dodge Durango Intake Camshaft Part Number: 5184379AH
$340.34 MSRP: $520.00
You Save: $179.66 (35%)
ADD TO CART
Product Specifications
- Other Name: Camshaft - Intake; Camshaft
- Replaces: 5184379AE, 5184379AG, 5184379AD, 5184379AF
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2015 Dodge Durango | Citadel, Crew, Express, Heat, Limited, Rallye, SXT, Special Service | 3.6L V6, 6 Cyl 3.6 L FLEX
View related parts
Dodge Durango Exhaust Camshaft Part Number: 5184378AH
$340.34 MSRP: $520.00
You Save: $179.66 (35%)
ADD TO CART
Product Specifications
- Other Name: Camshaft - Exhaust; Camshaft
- Replaces: 5184378AD, 5184378AE, 5184378AG, 5184378AF
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2015 Dodge Durango | Citadel, Crew, Express, Heat, Limited, Rallye, SXT, Special Service | 3.6L V6, 6 Cyl 3.6 L FLEX
View related parts
Dodge Durango Camshaft - Intake Part Number: 68661147AA
$438.69 MSRP: $663.00
You Save: $224.31 (34%)
ADD TO CART
Product Specifications
- Other Name: CAMSHAFT-INTAKE
- Replaced by: 68661147AB
- Replaces: 5047913AB, 5047913AD, 5047913AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2016-2024 Dodge Durango | Citadel, GT, GT Plus, GT Premium, Limited, Pursuit, SXT, SXT Plus, Special Service | 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
Dodge Durango Camshaft Part Number: 53021160AE
Product Specifications
- Other Name: Camshaft - Engine; Camshaft Engine Right
- Replaces: 53021160AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2003-2007 Dodge Durango | Adventurer, Limited, SLT, SLT Plus, ST, SXT, Sport | 4.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS
View related parts
Dodge Durango Camshaft Part Number: 5038419AB
Product Specifications
- Other Name: Camshaft - Engine; Camshaft Engine
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2018-2024 Dodge Durango | SRT, SRT 392, SRT 392 Plus, SRT 392 Premium | 8 Cyl 6.4 L GAS
View related parts
Dodge Durango Camshaft - Intake Part Number: 68661146AA
$482.05 MSRP: $702.00
You Save: $219.95 (32%)
Product Specifications
- Other Name: CAMSHAFT-INTAKE
- Replaces: 5047912AC, 5047912AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2016-2024 Dodge Durango | Citadel, GT, GT Plus, GT Premium, Limited, Pursuit, SXT, SXT Plus, Special Service | 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
Dodge Durango Camshaft Part Number: 53021160AA
Product Specifications
- Other Name: Camshaft - Engine; Camshaft Engine Right
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2000-2002 Dodge Durango | Base, SLT, SLT Plus, Sport | 8 Cyl 4.7 L GAS
View related parts
Dodge Durango Camshaft Part Number: 53021101
Product Specifications
- Other Name: Camshaft - Engine; Camshaft Engine
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1998-2003 Dodge Durango | Base, R/T, SLT, SLT Plus, SXT, Sport | 8 Cyl 5.9 L GAS

| Page 1 of 2 |Next >

1-20 of 26 Results

Dodge Durango Camshaft

Choose OEM Camshaft that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each Camshaft follows strict manufacturing steps to lock in quality and fit. If your Dodge Durango matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Durango parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

In Dodge Durango vehicles, the camshaft is very important as assists in the opening and closing of the intake and exhaust valves to allow the in the admission of the air/fuel mixture as well as the discharge of exhaust gases. Mostly made of iron or steel, the camshaft works through different systems including the Over Head Valve (OHV), Single Over Head Cam (SOHC), and the Double Over Head Cam (DOHC) which tend to impact on the operation of the engine in specific ways. Camshafts can be factory-made or after-market, while performance camshafts may have an increase lift and/ or longer duration to enhance on airflow and power among others. Other parameters such as LSA or Lobe Separation Angle influences the torque and the RPMs, they customize the power in accordance to the driving requirements. Overall, the camshaft has a crucial role of making the Dodge Durango's engine run efficiently as well as deliver power.

Dodge Durango Camshaft Parts and Q&A

Camshaft
53022065AB
Q: How to Install a Camshaft on the Left Side on Dodge Durango?
A:
Begin by rubbing clean engine oil on the journals of the left camshaft and arrange it so that the sprocket dowel is close to the 1 o'clock position while standing at its neutral position. Place the camshaft in the cylinder head and fit the bearing caps, holding the retaining bolts in position until they are all securely tightened and the stamped numbers from the bearing caps are in numerical order starting from the front of the engine. Starts with the middle bearing cap, turn the retaining bolts 1/2 turn, move to the next cap and torque them to 11 Nm (100 in. lbs.). Bring the camshaft drive gear alongside the Timing Chain and adjust them together so that both V6 marks appear between the chains. Reach under the camshaft with the Tool 8428 Camshaft wrench and turn the camshaft clockwise until the dowel on the sprocket fits in the slot. Finally, label the sprocket face and attach it down onto the camshaft. Be sure to wipe away extra oil from the sprocket bolt, so it doesn't cause the bolt to break. After that, tighten the retaining bolt by hand only. Once you remove Special Tool 8379 timing chain wedge, put Special Tool 6958 spanner wrench with adapter pins 8346 on the sprocket retaining bolt and tighten it to 122 Nm (90 ft. lbs.). After that, set the cylinder head cover in place.
Camshaft
53021892AC
Q: How to Safely Remove a Camshaft Without Causing Damage on Dodge Durango?
A:
Don't try to move the Timing Chain by itself when you are removing the camshaft to avoid serious harm to the valves or pistons. When taking out the cam sprocket, timing chains or camshaft, use Wedge Locking Tool 8379 so you don't overextend the hydraulic tensioner ratchet. Take off the cylinder head cover, then place the engine at TDC to No. 1 and make the camshaft sprocket V6 marks point to the 12 o'clock position. Put a mark on the secondary timing chain's middle link located on either side of the V6 mark found on the surface of the camshaft sprocket for use during installation. Take out enough slack in the bolt to move the sprocket, but keep it in place on the camshaft. Make sure the timing chain tensioners are secure before taking off the camshaft sprockets, so the tension limiters do not extend and you don't have to remove the timing chain cover. Pull and snap Locking Wedge Tool 8379 between the timing chain strands and tap it to secure the chain against the tensioners while not pushing it past the tightest point between the chains. Grip the camshaft using Spanner Wrench 6958 and Adapter Pins 8346 while you get rid of the camshaft sprocket bolt. Using Camshaft Holder 8428, first remove the sprocket and observe the camshaft rotating 5° clockwise until it stops. Relieve the bearing caps carefully by loosening the bolts that hold the camshaft bearing cap, going inward from the outside. Do not hit or stamp on the bearing caps so you do not damage them. Remember that once the camshaft is gone, the Rocker Arms can drop. Before removing the bearing caps and the camshaft, find a good place to mark them.