How to Install a TPMS Sensor on Dodge Durango?

Write down the tire pressure sensor ID before you start replacing your spare tire pressure sensor. Before reinstalling your tire pressure sensor, change the valve cap, valve core and sensor seal to check the sensor flat/notch is aiming at the wheel during installation. Ensure you are not harming the wheel as you clean around the sensor/valve stem mounting hole. Place the sensor fully inside the wheel, apply force to touch the back of the valve stem and have the potting side face toward the rotor. The flat on the seal should meet the housing of the sensor. Hand tighten the sensor nut, making sure the sensor housing is a perfect fit inside the wheel as you do this and then tighten it more with a torque wrench to 8 Nm (71 in. lbs.). Rotating wheel tire changers: Set the sensor valve stem nearly halfway between the head and the valve of the changer. Inflate the tires to the air pressure recommended in the Tire Inflation Pressure Label and put the original style valve cap back on the valve. Place the wheel assembly onto the vehicle, lower it to the ground and if you are not moving for more than 20 minutes, take the vehicle out for a drive of about 10 continuous minutes at a speed above 15 mph (24 km/h). While replacing the spare tire sensor, sensor data and a full sized wheel assembly on a vehicle with Tire Pressure Monitoring System, scan the vehicle with a diagnostic scan tool to program the new sensor's ID into the Wireless Control Module, after first taking the new sensor's ID code and following the "Learn Spare Tire Sensor ID" instructions. If you have a TPM-RKE Analyzer, set the spare pressure sensor to "Park," but if one isn't available, put the spare tire on one of the regular road tires.

OEM Dodge Durango TPMS Sensor

Tire Pressure Monitoring System Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 TPMS Sensors found

View related parts
Dodge Durango TPMS Sensor Part Number: 68241067AB
$106.84 MSRP: $160.00
You Save: $53.16 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Tire Pressure; TPMS Sensor Valve Assembly; Valve Repair Set; TPMS Service Kit.; Tire Pressure Sensor; Sensor; Sensor Tire Pressure Includes Cap; Sensor Tire Pressure
- Replaces: 68241067AA, 68142397AA, 68406537AA, 56029398AA, 68359037AA, 56029398AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2017 Dodge Durango | Citadel, Crew, Express, GT, Heat, Limited, R/T, Rallye, SXT, Special Service | 3.6L V6, 5.7L V8, 6 Cyl 3.6 L FLEX, 8 Cyl 5.7 L GAS
View related parts
Dodge Durango TPMS Sensor Part Number: 68406530AA
$69.52 MSRP: $155.00
You Save: $85.48 (56%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Tire Pressure; Tire Pressure Monitoring System Sensor; TPMS Sensor Service Kit; Tire Pressure Sensor; Pressure Sensor; Sensor
- Replaces: 56029479AB, 56053036AA, 56029465AA, 56029479AA, 56029465AB, 56029465AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2009 Dodge Durango | Adventurer, Limited, Limited Hybrid, SLT, SXT | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.7 L GAS
View related parts
Dodge Durango TPMS Sensor Part Number: 68313387AC
$68.02 MSRP: $102.00
You Save: $33.98 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Tire Pressure; Tire Pressure Monitoring System Sensor; TPMS Sensor Service Kit; Tire Pressure Sensor; Sensor Tire Pressure 20 Inch Wheels Only; Sensor Tire Pressure
- Replaces: 68252493AA, 68313387AA, 68313387AB, 68252493AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2016-2020 Dodge Durango | Citadel, GT, GT Plus, Limited, Pursuit, R/T, SRT, SXT, SXT Plus, Special Service | 3.6L V6, 5.7L V8, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6.4L V8, 8 Cyl 5.7 L GAS, 8 Cyl 6.4 L GAS
View related parts
Dodge Durango TPMS Sensor Part Number: 68252495AC
$66.16 MSRP: $91.75
You Save: $25.59 (28%)
ADD TO CART
Product Specifications
- Other Name: Sensor - Tire Pressure; Tire Pressure Monitoring System Sensor; TPMS Sensor Service Kit; Tire Pressure Sensor; Sensor Tire Pressure Threaded Shaft; Sensor Tire Pressure
- Replaces: 68252495AB, 68252495AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2016-2025 Dodge Durango | Citadel, GT, GT Plus, GT Premium, Limited, Pursuit, R/T, R/T Hemi Orange, R/T Plus, R/T Premium, SRT, SRT 392, SRT 392 Plus, SRT 392 Premium, SRT Hellcat, SRT Hellcat Plus, SRT Hellcat Premium, SXT, SXT Plus, Special Service | 3.6L V6, 5.7L V8, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6.4L V8, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 6.4 L GAS
View related parts
Dodge Durango TPMS Sensor Part Number: 68443470AB
$29.56 MSRP: $63.45
You Save: $33.89 (54%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Tire Pressure; Tire Pressure Monitoring System Sensor; TPMS Sensor Service Kit; Tire Pressure Sensor
- Replaces: 68443470AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2020-2025 Dodge Durango | Citadel, GT, GT Plus, GT Premium, Pursuit, R/T, R/T Hemi Orange, R/T Plus, R/T Premium, SRT, SRT 392, SRT 392 Plus, SRT 392 Premium, SRT Hellcat, SRT Hellcat Plus, SRT Hellcat Premium, SXT, SXT Plus, Special Service | 3.6L V6, 5.7L V8, 6 Cyl 3.6 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 6.4 L GAS

Dodge Durango TPMS Sensor

Choose OEM TPMS Sensor that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each TPMS Sensor follows strict manufacturing steps to lock in quality and fit. If your Dodge Durango matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Durango parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

Dodge Durango TPMS Sensor is crucial emphasizing the dependability and power of the Dodge Durango series. Intended to check the pressure of the tires, this TPMS Sensor informs individuals when the pressure is above or below the acceptable range which in turn creates productivity and safety when driving on the highways. Dodge Durango suits various models, which means that the drivers can always have correct tire size for the particular mid-size SUV regardless of the generation it belongs to. The TPMS Sensor comes in two main types: Direct TPMS (dTPMS) which entail the use of hardware sensors to bring into the real time tire pressure and Indirect TPMS (iTPMS) which entails the use of software to estimate the tire pressure. Although iTPMS is more easy to use the dTPMS provides greater level of precision, and this is why many users of Dodge Durango prefer the latter. The TPMS Sensor's options for mounting them further adds to its features: clamp-in, screw-in, or snap-in type. In fact, this component is essential to the durability of the Dodge Durango and also helps in conserving energy as the fuel needed in improper tires is saved and also saves the wear and tear energy used by improper tires. Thus, the Dodge Durango TPMS Sensor performs well as part of its design and has considerably sophisticated characteristics, which firmly establishes the Dodge Durango as a reliable car model in the automotive market.

Dodge Durango TPMS Sensor Parts and Q&A

TPMS Sensor
68406530AA
Q: How to Install a TPMS Sensor on Dodge Durango?
A:
Write down the tire pressure sensor ID before you start replacing your spare tire pressure sensor. Before reinstalling your tire pressure sensor, change the valve cap, valve core and sensor seal to check the sensor flat/notch is aiming at the wheel during installation. Ensure you are not harming the wheel as you clean around the sensor/valve stem mounting hole. Place the sensor fully inside the wheel, apply force to touch the back of the valve stem and have the potting side face toward the rotor. The flat on the seal should meet the housing of the sensor. Hand tighten the sensor nut, making sure the sensor housing is a perfect fit inside the wheel as you do this and then tighten it more with a torque wrench to 8 Nm (71 in. lbs.). Rotating wheel tire changers: Set the sensor valve stem nearly halfway between the head and the valve of the changer. Inflate the tires to the air pressure recommended in the Tire Inflation Pressure Label and put the original style valve cap back on the valve. Place the wheel assembly onto the vehicle, lower it to the ground and if you are not moving for more than 20 minutes, take the vehicle out for a drive of about 10 continuous minutes at a speed above 15 mph (24 km/h). While replacing the spare tire sensor, sensor data and a full sized wheel assembly on a vehicle with Tire Pressure Monitoring System, scan the vehicle with a diagnostic scan tool to program the new sensor's ID into the Wireless Control Module, after first taking the new sensor's ID code and following the "Learn Spare Tire Sensor ID" instructions. If you have a TPM-RKE Analyzer, set the spare pressure sensor to "Park," but if one isn't available, put the spare tire on one of the regular road tires.