How to Maintain and Fix a Wheel Bearing on Dodge Durango?

Before servicing or repairing the wheel bearing, raise and support your car and then remove the wheel and tire. Following that, remove the brake caliper, rotor and ABS wheel speed sensor from the car, if your vehicle has one. Take out the hub/bearing spindle nut and make sure you throw it away. Slide the bearing/hub backward off the end of the spindle. To replace, fit the new hub/bearing onto the spindle, put on a new nut and then tighten it to 251 Nm (185 ft. lbs.). Once again fit the brake rotor, caliper and ABS wheel speed sensor and then put the wheel and tire assembly in place. Afterward, remove the support and slowly lower your vehicle.

How to Service and Repair Wheel Bearings on a 9 1/4 Rear Axle Configuration on Dodge Durango?

Fixing and maintaining a rear axle that is a 9 1/4 means first removing the axle shaft and then pulling out the axle seal. Put Receiver 9338 on the axle tube, then bring in bearing Remover 6310 with its foot so it just fits into the bearing. Firmly tighten the nut so the bearing is placed inside the receiver. Boots will adhere better if you start by removing any worn sealer or protruding ridges from the axle tube. For C-4171, hold the axle in Installer 9337 with the bearing part number visible and drive it in until the tool hits the axle tube. Apply axle lubricant to the axle seal lip, put it together using Installer 9337 and Handle C-4171 and finally slide the axle shaft back into position.

OEM Dodge Durango Wheel Bearing

Hub Bearing

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 Wheel Bearings found

View related parts
Dodge Durango Wheel Bearing, Rear Part Number: 52124768AB
$181.28 MSRP: $267.00
You Save: $85.72 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing - Wheel; Wheel Bearing, Rear; Axle Bearing; Rear Wheel Bearing; Bearing; Bearing Wheel
- Position: Rear
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2025 Dodge Durango | Citadel, Crew, Express, GT, GT Plus, GT Premium, Heat, Limited, Pursuit, R/T, R/T Hemi Orange, R/T Plus, R/T Premium, Rallye, SRT, SRT 392, SRT 392 Plus, SRT 392 Premium, SRT Hellcat, SRT Hellcat Plus, SRT Hellcat Premium, SXT, SXT Plus, Special Service | 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 6.4 L GAS
View related parts
Dodge Durango Wheel Bearing, Rear Part Number: 3507898AB
$57.95 MSRP: $87.55
You Save: $29.60 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing - Axle Shaft; Drive Axle Shaft Bearing, Rear; Differential Bearing; Axle Bearing; Axle Bearings; Bearing Assembly; Differential Cover Bearing; Bearing; Bearing Axle Shaft; Bearing Wheel
- Position: Rear
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1998-2003 Dodge Durango | Base, R/T, SLT, SLT Plus, SXT, Sport | 6 Cyl 3.9 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS
View related parts
Dodge Durango Rear Hub Part Number: 68306998AB
$105.57 MSRP: $163.00
You Save: $57.43 (36%)
ADD TO CART
Product Specifications
- Other Name: Hub - Wheel; Wheel Hub, Rear; Wheel Hub Repair Kit; Hub; Hub Wheel; Wheel Hub
- Position: Rear
- Replaces: 68306998AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2021-2025 Dodge Durango | Citadel, GT, GT Plus, GT Premium, Pursuit, R/T, R/T Hemi Orange, R/T Plus, R/T Premium, SRT, SRT 392, SRT 392 Plus, SRT 392 Premium, SRT Hellcat, SRT Hellcat Plus, SRT Hellcat Premium, SXT, SXT Plus, Special Service | 6 Cyl 3.6 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 6.4 L GAS
View related parts
Dodge Durango Hub & Bearing Part Number: 52104499AK
$506.09 MSRP: $767.00
You Save: $260.91 (35%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hub - Brake
- Replaces: 52104499AH, 52104499AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2009 Dodge Durango | Adventurer, Limited, Limited Hybrid, SE, SLT, SXT | 3.7L V6, 4.7L V8, 5.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.7 L GAS
View related parts
Dodge Durango Front Hub & Bearing Part Number: 52104499AI
$546.98 MSRP: $831.00
You Save: $284.02 (35%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hub - Brake; Front Wheel Bearing and Hub Assembly; Repair Kit; Assembly; Bearing Kit.
- Position: Front
- Replaces: 52104499AG, 52104499AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2009 Dodge Durango | Adventurer, Limited, Limited Hybrid, SE, SLT, SXT | 3.7L V6, 4.7L V8, 5.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.7 L GAS
View related parts
Dodge Durango Rear Hub Part Number: 4779612AE
$258.32 MSRP: $380.00
You Save: $121.68 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hub - Wheel; Wheel Hub, Rear; Wheel Hub Repair Kit; Hub; Hub Wheel; Wheel Hub
- Position: Rear
- Replaces: 4779612AB, 4779612AC, 4779612AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2025 Dodge Durango | Citadel, Crew, Express, GT, GT Plus, GT Premium, Heat, Limited, Pursuit, R/T, R/T Hemi Orange, R/T Plus, R/T Premium, Rallye, SRT, SRT 392, SRT 392 Plus, SRT 392 Premium, SRT Hellcat, SRT Hellcat Plus, SRT Hellcat Premium, SXT, SXT Plus, Special Service | 3.6L V6, 5.7L V8, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6.4L V8, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 6.4 L GAS
View related parts
Dodge Durango Hub & Bearing, Front Part Number: 68417794AB
$246.08 MSRP: $322.00
You Save: $75.92 (24%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hub - Brake; Wheel Bearing and Hub Assembly, Front; Front Hub & Bearing
- Position: Front
- Replaces: 68417794AA, 52104499AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2004-2005 Dodge Durango | Limited, SLT, ST, SXT | 3.7L V6, 4.7L V8, 5.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS

Dodge Durango Wheel Bearing

Choose OEM Wheel Bearing that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each Wheel Bearing follows strict manufacturing steps to lock in quality and fit. If your Dodge Durango matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Durango parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

The Wheel Bearing which can be found in Dodge Durango vehicles is an essential component that ensures the efficiency of the wheels' rotation so as to increase the vehicle performance and safety. These are placed within the hubs and the function to minimize the friction so as to enable the assembly of the wheel and tire to rotate effortlessly. Dodge Durango models that use hub and bearing assemblies, three type of units are the most useful: though, the most common of them all is the unit hub and bearing assembly that also contain an ABS sensor and is generally well replaced as a unit. Also, while some of the driven front-wheel-drive Durango vehicles require the pulling off of the steering knuckle for service, the non-driven axle hubs have serviceable tapered roller bearings. Wheel bearings are used in automobiles up to they get worn or become loose this causes noise, vibrations and sometimes results to wheel loss hence require frequent checks. In maintenance, one needs to check for roughness and if there is need for replacements, it must be done using high quality grease and set to standard values as recommended by the manufacturer.

Dodge Durango Wheel Bearing Parts and Q&A

Wheel Bearing, Rear
3507898AB
Q: How to Maintain and Fix a Wheel Bearing on Dodge Durango?
A:
Before servicing or repairing the wheel bearing, raise and support your car and then remove the wheel and tire. Following that, remove the Brake Caliper, rotor and ABS wheel speed sensor from the car, if your vehicle has one. Take out the hub/bearing spindle nut and make sure you throw it away. Slide the bearing/hub backward off the end of the spindle. To replace, fit the new hub/bearing onto the spindle, put on a new nut and then tighten it to 251 Nm (185 ft. lbs.). Once again fit the brake rotor, caliper and ABS wheel speed sensor and then put the wheel and tire assembly in place. Afterward, remove the support and slowly lower your vehicle.
Hub & Bearing
52104499AK
Q: How to Service and Repair Wheel Bearings on a 9 1/4 Rear Axle Configuration on Dodge Durango?
A:
Fixing and maintaining a rear axle that is a 9 1/4 means first removing the Axle Shaft and then pulling out the axle seal. Put Receiver 9338 on the axle tube, then bring in bearing Remover 6310 with its foot so it just fits into the bearing. Firmly tighten the nut so the bearing is placed inside the receiver. Boots will adhere better if you start by removing any worn sealer or protruding ridges from the axle tube. For C-4171, hold the axle in Installer 9337 with the bearing part number visible and drive it in until the tool hits the axle tube. Apply axle lubricant to the axle seal lip, put it together using Installer 9337 and Handle C-4171 and finally slide the axle shaft back into position.