How to Install a Crossmember Bushing on Dodge Grand Caravan?

The first thing to do is to lubricate the replacement bushing with either rubber lubricant or soap. Work the lower bushing into place in the rectangular hole on the cradle crossmember and then set the upper half of the bushing on top of it to match up with the tube sticking out from below. Press the two bushing halves against one another, then lift up the cradle crossmember so the bushing gap closes. Confirm that the lower bushing has hit the bottom of the crossmember and the upper bushing is on the sheet metal too. Secure the bushing and crossmember to the frame rail with the bolt by hand, fit the cradle crossmember to the matching marks on the frame rails and tighten the attachment bolts to 163 Nm (120 ft. lbs.).

How to Maintain and Fix a Crossmember Bushing on Dodge Grand Caravan?

First, use either paint or a grease pencil to outline the Front Cross-Member Bushing on the cradle crossmember in the frame rails. After loosening the bolts between the frame rails and the crossmember, remove the bolt from the bushing you need to replace. Make sure the cradle crossmember is low enough to move the bushings and then take out the bushings from the vehicle. Before installation, coat the new bushing with lubricant or soap and get the bottom half into the cradle crossmember's square hole. Place the top portion of the bushing on the crossmember, so that it matches the square tube rising from the bushing at the bottom. Join the bushing halves snugly and then raise the cradle channel crossmember to close the space between the bushing and the frame. Push the lower bushing down into the cradle crossmember and upper bushing, then attach the bolt from the crossmember to the frame rail just tight enough by hand. Heavy-duty clamps must be added at both sides of the frame to clamp the cradle crossmember to the frame rails during the torqueing of the attaching bolts to 163 N.m (120 ft. lbs).

OEM Dodge Grand Caravan Crossmember Bushing

Crossmember Mount

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

9 Crossmember Bushings found

View related parts
Dodge Grand Caravan Isolator, Rear Upper Part Number: 4684284
$40.17 MSRP: $86.45
You Save: $46.28 (54%)
ADD TO CART
Product Specifications
- Other Name: Bushing - Cradle; Suspension Crossmember Insulator, Rear Upper; Isolator, Cradle, Rear; Isolator Cradle
- Position: Rear Upper
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1996-2007 Dodge Grand Caravan | Anniversary Edition, Base, C/V, EL, ES, EX, LE, SE, SE Plus, SXT, Sport | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L CNG, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS
View related parts
Dodge Grand Caravan Isolator Part Number: 4684285
$18.03 MSRP: $23.20
You Save: $5.17 (23%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bushing - Cradle; Coil Spring Insulator; Isolator, Cradle, Rear; Isolator Cradle
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1996-2000 Dodge Grand Caravan | Base, ES, LE, SE, Sport | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L CNG, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS
View related parts
Dodge Grand Caravan Isolator, Rear Lower Part Number: 4684285AB
$27.25 MSRP: $40.05
You Save: $12.80 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bushing - Cradle; Suspension Crossmember Insulator, Rear Lower; Coil Spring Insulator; Isolator Cradle
- Position: Rear Lower
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2007 Dodge Grand Caravan | Anniversary Edition, Base, C/V, EL, ES, EX, SE, SE Plus, SXT, Sport | 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS
View related parts
Dodge Grand Caravan Crossmember Bushing, Front Part Number: 5273730AB
$51.86 MSRP: $77.05
You Save: $25.19 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bushing - Cradle; Suspension Crossmember Insulator, Front Rearward; Coil Spring Insulator; Isolator; Isolator Cradle Lower Rear; Isolator Cradle
- Position: Front
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2020 Dodge Grand Caravan | American Value Package, C/V, Crew, Express, GT, Mainstreet, R/T, SE, SE 30th Anniversary Edition, SE Plus, SXT, SXT 30th Anniversary Edition | 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L GAS
View related parts
Dodge Grand Caravan Crossmember Bushing, Front Part Number: 5273729AB
$53.72 MSRP: $79.85
You Save: $26.13 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bushing - Cradle; Suspension Crossmember Insulator, Front Forward; Coil Spring Insulator; Isolator; Isolator Cradle Lower Front; Isolator Cradle
- Position: Front
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2020 Dodge Grand Caravan | American Value Package, C/V, Crew, Express, GT, Mainstreet, R/T, SE, SE 30th Anniversary Edition, SE Plus, SXT, SXT 30th Anniversary Edition | 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L GAS
View related parts
Dodge Grand Caravan Isolator, Front Upper Part Number: 4684286
$58.58 MSRP: $86.45
You Save: $27.87 (33%)
ADD TO CART
Product Specifications
- Other Name: Bushing - Cradle; Suspension Crossmember Insulator, Front Upper; Isolator, Cradle, Front; Isolator Cradle
- Position: Front Upper
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1996-2007 Dodge Grand Caravan | Anniversary Edition, Base, C/V, EL, ES, EX, LE, SE, SE Plus, SXT, Sport | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L CNG, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS
View related parts
Dodge Grand Caravan Radiator Lower Insulator Part Number: 5005519AC
$3.35 MSRP: $4.25
You Save: $0.90 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Isolator - Crossmember; Isolator Crossmember Condenser, Lower; Isolator Crossmember Lower; Isolator Crossmember
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2004 Dodge Grand Caravan | Anniversary Edition, Base, C/V, EL, ES, EX, SE, SXT, Sport | 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS
View related parts
Dodge Grand Caravan Isolator, Front Lower Part Number: 4684287AB
$27.96 MSRP: $40.40
You Save: $12.44 (31%)
Product Specifications
- Other Name: Bushing - Cradle; Suspension Crossmember Insulator, Front Lower; Coil Spring Insulator; Isolator Cradle
- Position: Front Lower
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1996-2007 Dodge Grand Caravan | Anniversary Edition, Base, C/V, EL, ES, EX, LE, SE, SE Plus, SXT, Sport | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L CNG, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS
View related parts
Dodge Grand Caravan Radiator Lower Insulator Part Number: 5005519AE
Product Specifications
- Other Name: Isolator - Crossmember; Radiator Insulator, Lower; Isolator; Isolator Crossmember Lower; Isolator Crossmember
- Position: Lower
- Replaces: 5005519AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2005-2007 Dodge Grand Caravan | Base, C/V, SE, SE Plus, SXT | 3.3L V6, 3.8L V6, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS

Dodge Grand Caravan Crossmember Bushing

Choose OEM Crossmember Bushing that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each Crossmember Bushing follows strict manufacturing steps to lock in quality and fit. If your Dodge Grand Caravan matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Grand Caravan parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

The Dodge Grand Caravan Crossmember Bushing maintains an essential role within the suspension setup installed throughout different Dodge Grand Caravan vehicle models due to its proven reliability and performance quality. This bushing enables vital anchoring points which allow parts to move smoothly yet it simultaneously absorbs shocks and vibrations. During drives the Dodge Grand Caravan Crossmember Bushing ensures the proper alignment for cabin isolation thus creating safer and more efficient driving conditions. High-quality rubber makes up these bushings which provide cushioning and factory precision handling thus making them critical elements for an optimal driving experience. Since entering the market the Dodge Grand Caravan has earned consumer preference because the Crossmember Bushing plays a major part in its reputation. Customers select this automotive component because of its ability to deliver comfort and performance across multiple Grand Caravan models which establishes its market leadership position. The Dodge Grand Caravan Crossmember Bushing adopts rubber bushings as the default but adds strength through daily driving conditions for durability and reliability. The product stands out because of its convenient installation process together with its successful noise reduction capabilities. The Dodge car Crossmember Bushing demonstrates the brand's dedication to product excellence which makes it a critical element for maintaining the minivan segment's legacy of the the automaker model.

Dodge Grand Caravan Crossmember Bushing Parts and Q&A

Isolator, Rear Lower
4684285AB
Q: How to Install a Crossmember Bushing on Dodge Grand Caravan?
A:
The first thing to do is to lubricate the replacement bushing with either rubber lubricant or soap. Work the lower bushing into place in the rectangular hole on the cradle crossmember and then set the upper half of the bushing on top of it to match up with the tube sticking out from below. Press the two bushing halves against one another, then lift up the cradle crossmember so the bushing gap closes. Confirm that the lower bushing has hit the bottom of the crossmember and the upper bushing is on the sheet metal too. Secure the bushing and crossmember to the frame rail with the bolt by hand, fit the cradle crossmember to the matching marks on the frame rails and tighten the attachment bolts to 163 Nm (120 ft. lbs.).
Isolator, Rear Upper
4684284
Q: How to Maintain and Fix a Crossmember Bushing on Dodge Grand Caravan?
A:
First, use either paint or a grease pencil to outline the Front Cross-Member Bushing on the cradle crossmember in the frame rails. After loosening the bolts between the frame rails and the crossmember, remove the bolt from the bushing you need to replace. Make sure the cradle crossmember is low enough to move the bushings and then take out the bushings from the vehicle. Before installation, coat the new bushing with lubricant or soap and get the bottom half into the cradle crossmember's square hole. Place the top portion of the bushing on the crossmember, so that it matches the square tube rising from the bushing at the bottom. Join the bushing halves snugly and then raise the cradle channel crossmember to close the space between the bushing and the frame. Push the lower bushing down into the cradle crossmember and upper bushing, then attach the bolt from the crossmember to the frame rail just tight enough by hand. Heavy-duty clamps must be added at both sides of the frame to clamp the cradle crossmember to the frame rails during the torqueing of the attaching bolts to 163 N.m (120 ft. lbs).