OEM Dodge Intrepid Throttle Cable

Dodge Intrepid Throttle Cable Parts and Q&A

• Throttle Cable
  4591233AB
  Q: How to Maintain and Fix a Throttle Cable on Dodge Intrepid?

  A:

  Hold the Throttle Body lever to its widest position and lead the cable ahead, letting it out of the throttle body cam found by opening the hood. Then, inside the car, press the pedal and take out the retainer and cable from the top of the pedal shaft. Pull the retainer clip from the throttle cable and check that the grommet remains in the dash panel. Squeeze the ears holding the throttle cable and lift it out of the throttle bracket. To install, push the part for the dash panel into the grommet from the engine area and the cable housing on the throttle body goes into the mounting bracket on the engine. From inside the vehicle, press down the pedal again to put the throttle cable and cable retainer at the top of the shaft. Install the retainer clip for the cable to the panel of the dash after the grommet and soon after rotate the throttle lever to the widest position by fitting the cable into the engine compartment.
• Throttle Cable
  4591244
  Q: How to Service and Repair a Throttle Cable on Dodge Intrepid?

  A:

  For servicing and repairing the throttle cable and linkage, first open the throttle lever wide from the engine compartment while pulling the rubber cable ahead and out of the Throttle Body cam. Within the vehicle, lift the pedal up and pull on the cable retainer and throttle cable at the top of the pedal shaft. Pull the throttle cable from the dash panel while, at the same time, removing the retainer from the cable and grommet grommet and making sure both attachments stay put. Place two hands on either ear of the throttle, press down a little and gently release the cable from the bracket. To install, put the fitting on the dash panel grommet end inside the engine compartment and secure the other end of the housing at the throttle body to its mounting bracket on the engine. Insert the end of the throttle cable with the retainer into the bracket at the top of the pedal shaft, then hold the pedal up. Mount the cable retainer clip between the bottom of the throttle cable fitting and the throttle cable grommet at the dash panel, then open the throttle lever wide in the engine compartment and hook up the cable.