How to Properly Service an Oil Filter on Dodge Magnum?

Take the vehicle up on a hoist and then take out the bolts holding on the splash shield and remove it. Set a collecting container on the ground below the oil filter, unscrew the filter with an appropriate wrench and remember to handle and dispose of it properly. Before lubricating the new filter's gasket with oil, wash the filter base and examine the area where the gasket is sealed. Place the new filter, tighten it to 16 Nm (9 ft. lbs.) when it touches the base and secure it with the filter wrench if you need help. Put the lower splash shield back in place, secure it with the bolts and add the correct amount of engine oil to the crankcase. Start the engine and look for leaks and check the level of engine oil by pulling out the dipstick and adding oil as required.

How to Remove and Replace an Oil Filter on Dodge Magnum?

Lift the vehicle on a hoist as the first step to replace the oil filter. After that, unbolt the lower splash shield retaining bolts and take off the splash shield. Make sure there is a good collecting container below where the oil filter is installed. After that, take out the oil filter with an appropriate filter wrench and throw it away according to environmental rules.

OEM Dodge Magnum Oil Filter

Engine Oil filter

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Oil Filters found

View related parts
Dodge Magnum Oil Filter Part Number: 5281090AB
$7.55 MSRP: $11.15
You Save: $3.60 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Filter - Engine Oil; Engine Oil Filter; Filter Change Maintenance Kit; Spin-On Oil Filter; Oil Pick-Up; Filter
- Replaces: 5013780AA, 3555556313, 5281090
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2005-2007 Dodge Magnum | R/T, SE, SRT8, SXT, SXT Special Edition | 2.7L V6, 3.5L V6, 5.7L V8, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 6.1L V8, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS
View related parts
Dodge Magnum Oil Filter Part Number: 4884899AC
$6.87 MSRP: $10.05
You Save: $3.18 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Filter - Engine Oil; Engine Oil Filter; Filter Change Maintenance Kit; Spin-On Oil Filter; Filter Engine Oil [22Mm]; Filter Engine Oil
- Replaces: 4884899AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008 Dodge Magnum | R/T, SE, SRT8, SXT | 2.7L V6, 3.5L V6, 5.7L V8, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 6.1L V8, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS

Dodge Magnum Oil Filter

Choose OEM Oil Filter that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each Oil Filter follows strict manufacturing steps to lock in quality and fit. If your Dodge Magnum matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Magnum parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

The oil filter then in Dodge Magnum vehicles is very important as it serves to help in maintaining the health of the vehicles engine by ensuring that the engine oil is clean and free from any grit. It works through passing and capturing damaging contaminants and properly promoting of oil circulation which is critical on reduction of wear besides preventing formation of sludge. Dodge Magnum oil filters are of two general types of the replaceable element cartridge filters and spin-on type filters, the later has a metal case to protect the filter elements against high oil pressure and vibrating engines. For the period of its existence Dodge Magnum has been using both regular and high performance oil filters. Typical filters are deemed inadequate for high relative performance engines due to the fact that they normally hamper circulation of oil and lead to harm of the engines. Unlike the conventional oil filters, the performance oil filters have thick canister walls and synthetic media that ensures high flow rates while at the same time trapping impurities at up to ninety-nine percent. This progress also improves Dodge Magnum vehicle requirements and durability of its engine and other valuable components, which is important for each vehicle owner.

Dodge Magnum Oil Filter Parts and Q&A

Oil Filter
5281090AB
Q: How to Properly Service an Oil Filter on Dodge Magnum?
A:
Take the vehicle up on a hoist and then take out the bolts holding on the splash shield and remove it. Set a collecting container on the ground below the oil filter, unscrew the filter with an appropriate wrench and remember to handle and dispose of it properly. Before lubricating the new filter's gasket with oil, wash the filter base and examine the area where the gasket is sealed. Place the new filter, tighten it to 16 Nm (9 ft. lbs.) when it touches the base and secure it with the filter wrench if you need help. Put the lower splash shield back in place, secure it with the bolts and add the correct amount of engine oil to the crankcase. Start the engine and look for leaks and check the level of engine oil by pulling out the dipstick and adding oil as required.
Oil Filter
4884899AC
Q: How to Remove and Replace an Oil Filter on Dodge Magnum?
A:
Lift the vehicle on a hoist as the first step to replace the oil filter. After that, unbolt the lower splash shield retaining bolts and take off the splash shield. Make sure there is a good collecting container below where the oil filter is installed. After that, take out the oil filter with an appropriate filter wrench and throw it away according to environmental rules.