How to Replace A/C Compressor Cut-Out Switches Safely on Dodge Neon?

Before you replace the A/C high pressure switch, first get the refrigerant out of the A/C system and disconnect the battery negative cable. First, bump and support the car, then disconnect the engine wire harness connector from the high pressure cut out switch on the compressor back cover. With snap ring pliers, release the internal retaining clip holding the switch to the compressor back cover and then take the switch out. Seal up the open switch port by plugging or taping over it and then remove the rubber O-ring found on the old switch. While you're installing the new cutout switch, always replace the O-ring, having it installed according to the specifications of the R-134a applied in your car. Always use the suggested refrigerant oil for the compressor. Disconnect the tape or plug from the switch and remove it, add the new switch and link the engine wire harness connector once more. Lower the vehicle, join the battery negative cable, run the refrigerant from the system and fill the A/C system up.

How Do A/C Compressor Cut-Out Switches Relate to Low Pressure Sensor Service and Repair on Dodge Neon?

Be sure to complete the recovery process on the refrigeration system before handling the Low Pressure Sensor / Switch. Initial step is to unplug the wire connector at the cut-off switch. After that, remove the switch by inserting the sender unit removal socket onto the expansion valve. Look at the O-ring when inserting the new switch. Take the engine apart in the reverse order, leave it and charge the system.

OEM Dodge Neon A/C Compressor Cut-Out Switches

HVAC Cut-Out Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 A/C Compressor Cut-Out Switches found

View related parts
Dodge Neon Pressure Relief Valve Part Number: 4720848
$47.47 MSRP: $60.18
You Save: $12.71 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Valve - High Pressure Relief; A/C Compressor Relief & Control Valve; HVAC Pressure Switch.; Relief Valve; Compressor Assembly, 2.4L Engine (Nippondenso), W/Clutch; High Pressure Relief Valve.
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1995-1998 Dodge Neon | ACR, Base, High Line, R/T, Sport | 4 Cyl 2.0 L GAS
View related parts
Dodge Neon High Pressure Cut-Off Switch Part Number: 4773101
$9.13 MSRP: $11.57
You Save: $2.44 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch - A/C High Pressure Cut Off; Switch, A/C High Pressure Cutoff, 2.0 Engine; High Pressure Cut Off.
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1995-1999 Dodge Neon | ACR, Base, High Line, R/T, Sport | 4 Cyl 2.0 L GAS
View related parts
Dodge Neon Pressure Switch Part Number: 5140327AA
$18.23 MSRP: $23.10
You Save: $4.87 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch - A/C Low Pressure Cut Off; HVAC Pressure Switch; A/C Compressor Cut-Out; Trinary Switch.; Switch A/C Low Pressure Cut Off
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2005 Dodge Neon | SE, SRT-4, SXT | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
Dodge Neon Pressure Switch Part Number: 5014574AA
$66.93 MSRP: $94.50
You Save: $27.57 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch - A/C High Pressure Cut Off; HVAC Pressure Switch; A/C Safety & Compressor Cut-Out Switch; A/C Trinary Switch.; High Pressure Cut-Off Switch; Switch A/C High Pressure Cut Off
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2003-2005, 2000-2001 Dodge Neon | ACR, Base, ES, High Line, R/T, SE, SRT-4, SXT | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
Dodge Neon Pressure Switch Part Number: 5058213AA
Product Specifications
- Other Name: Switch - A/C Low Pressure Cut Off; HVAC Pressure Switch; A/C Compressor Cut-Out; Trinary Switch.; Lower Pressure Cut-Off Switch; Switch A/C Low Pressure Cut Off
- Replaces: 5096290AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2003-2005 Dodge Neon | R/T, SE, SRT-4, SXT | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
Dodge Neon Pressure Switch Part Number: 5080867AA
Product Specifications
- Other Name: Switch A/C Low Pressure Cubic; HVAC Pressure Switch; A/C Compressor Cut-Out; Trinary Switch; System Valve Core.; Switch A/C Low Pressure Cut Off
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2002 Dodge Neon | ACR, Base, ES, R/T, SE | 4 Cyl 2.0 L GAS

Dodge Neon A/C Compressor Cut-Out Switches

Choose OEM A/C Compressor Cut-Out Switches that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each A/C Compressor Cut-Out Switches follows strict manufacturing steps to lock in quality and fit. If your Dodge Neon matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Neon parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

The Dodge Neon A/C Compressor Cut-Out Switches are essential parts that are proof of the dedication Dodge has for its cars and trucks. A/C Compressor Cut-Out Switches for Dodge Neon are specifically made to check the discharge pressure and regulate it so that the unit will not overwork the compressor. Through the functions of these switches that turn off the power to the compressor each time pressure reaches some specific level, these components are indispensable in the improvement of the function and stability of the A/C system. It not only helps save a lot of money that would have been used to repair the A/C system but also adds years to the life expectancy of the A/C system making it to be among the most recommended Dodge Neon features. Dodge Neon, committed to a compact shape and numerous options, will not stay indifferent to A/C Compressor Cut-Out Switches, which can be used in the first and the second generation of Neon. Especially the second generation of the Neon has undergone changes that generally improve the car's performance and this includes the A/C Compressor Cut-Out Switches that provide for efficient performance of the car even under some conditions. As a result of these switches' capacity to guard against harm during intense conditions, it is evident that these products appeal to consumers within the automotive world, strengthening Dodge's brand image of vehicles that safeguard and perform with increased proficiency. Altogether, with respect to the discussed cars, Dodge Neon A/C Compressor Cut-Out Switches seem to be quite noteworthy, as they are important for preserving the A/C system's integrity in the brand.

Dodge Neon A/C Compressor Cut-Out Switches Parts and Q&A

Pressure Switch
5080867AA
Q: How to Replace A/C Compressor Cut-Out Switches Safely on Dodge Neon?
A:
Before you replace the A/C high pressure switch, first get the refrigerant out of the A/C system and disconnect the battery negative cable. First, bump and support the car, then disconnect the engine wire harness connector from the high pressure cut out switch on the compressor back cover. With snap ring pliers, release the internal retaining clip holding the switch to the compressor back cover and then take the switch out. Seal up the open switch port by plugging or taping over it and then remove the rubber O-ring found on the old switch. While you're installing the new cutout switch, always replace the O-ring, having it installed according to the specifications of the R-134a applied in your car. Always use the suggested refrigerant oil for the compressor. Disconnect the tape or plug from the switch and remove it, add the new switch and link the engine wire harness connector once more. Lower the vehicle, join the battery negative cable, run the refrigerant from the system and fill the A/C system up.
Pressure Switch
5014574AA
Q: How Do A/C Compressor Cut-Out Switches Relate to Low Pressure Sensor Service and Repair on Dodge Neon?
A:
Be sure to complete the recovery process on the refrigeration system before handling the Low Pressure Sensor / Switch. Initial step is to unplug the wire connector at the cut-off switch. After that, remove the switch by inserting the sender unit removal socket onto the expansion valve. Look at the O-ring when inserting the new switch. Take the engine apart in the reverse order, leave it and charge the system.