How to Maintain the Headlight Switch on Dodge Neon?

Before servicing the switch, lower the A/C outlet registers, hold the outer part of each register with your fingers, rotate it a little more to release it, then pull straight out the outlet and remove it by hand. Then, take the 4 control knobs and pull them straight up, take out the 2 screws in the center of the instrument and pull the bezel up to remove the 4 snaps holding the bezel in place. Remove screws 1 and 2 from the accessory switch bank, pull the bank free and pull the electrical connector from the headlamp leveling switch. Pull on the headlamp leveling switch, wiggling it gently to release it from its holder. While installing, fit the headlamp leveling switch into the accessory switch bank and plug in the electrical connector. Switch on the panel, locate the accessory switch section and put in the 4 retaining screws. Attach the center instrument bezel, replace the screws, fit the 4 HVAC control knobs and finally put the A/C outlet registers on the instrument bezel.

How to Replace the Headlight Switch on Dodge Neon?

To put in a new headlamp leveling switch, lower the A/C outlet registers all the way, grasp the outlet from its side, rotate it further to pop it off its pivot post, then take it straight out. Following that, get the (4) HVAC control knobs off the shaft, remove the (2) screws in the center of the gauge and straighten the bezel to pop out the (4) retaining clips. Removing the accessory switch bank is next; undo the (2) screws, take it out and disconnect the connector at the headlamp leveling switch. Carefully use a flathead screwdriver to pop the headlamp leveling switch from the mounting clips. First, snap the switch in, connect the electrical wiring and test the newly installed switch. Fix the accessory switch bank to its place, screw down the (4) retaining screws, snap on the center instrument bezel and fasten the center bezel screws. Put on the remaining (4) HVAC control knobs and the A/C outlet registers in the center instrument bezel.

OEM Dodge Neon Headlight Switch

Headlamp Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 Headlight Switches found

View related parts
Dodge Neon Headlamp Switch Part Number: 56021898AB
$79.83 MSRP: $122.00
You Save: $42.17 (35%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch - Headlamp
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1995-1999 Dodge Neon | ACR, Base, High Line, R/T, Sport | 4 Cyl 2.0 L GAS
View related parts
Dodge Neon Turn Signal Switch Part Number: 4794357AA
Product Specifications
- Other Name: Switch - Multifunction; Multi Purpose Switch; Signal Switch
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1995-1999 Dodge Neon | ACR, Base, High Line, R/T, Sport | 4 Cyl 2.0 L GAS
View related parts
Dodge Neon Headlamp Switch Part Number: 56021898AC
Product Specifications
- Other Name: Switch - Headlamp
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1995-1999 Dodge Neon | ACR, Base, High Line, R/T, Sport | 4 Cyl 2.0 L GAS
View related parts
Dodge Neon Headlamp Switch Part Number: 5073044AB
Product Specifications
- Other Name: Switch - Multifunction; Turn Signal & Combination Lever; Combination Switch; Wiper Switch; Switch Multifunction
- Replaces: 4794305AA, 4794305AC, 5019568AA, 5073044AA, 4794305AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2000-2005 Dodge Neon | ACR, Base, ES, High Line, R/T, SE, SRT-4, SXT | 1.6L L4, 2.0L L4, 2.4L L4, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
Dodge Neon Switch Part Number: 4794276AA
Product Specifications
- Other Name: Switch - Headlamp Leveling; Switch Headlamp Leveling
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2000-2005 Dodge Neon | ACR, Base, ES, High Line, R/T, SE, SRT-4, SXT | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
Dodge Neon Headlamp Switch Part Number: 5073046AC
Product Specifications
- Other Name: Switch - Multifunction
- Replaces: 5019570AA, 5073046AB, 5073046AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2000-2005 Dodge Neon | R/T, SE, SRT-4, SXT | 1.6L L4, 2.0L L4, 2.4L L4, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
Dodge Neon Headlamp Switch Part Number: 5073045AC
Product Specifications
- Other Name: Switch - Multifunction; Turn Signal & Combination Lever; Combination Switch; Wiper Switch
- Replaces: 5073045AA, 4794306AB, 5019569AA, 5073045AB, 4794306AA, 4794306AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2000-2005 Dodge Neon | ACR, Base, ES, High Line, R/T, SE, SRT-4, SXT | 1.6L L4, 2.0L L4, 2.4L L4, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS

Dodge Neon Headlight Switch

Choose OEM Headlight Switch that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each Headlight Switch follows strict manufacturing steps to lock in quality and fit. If your Dodge Neon matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Neon parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

Dodge Neon Headlight Switch is one of the important parts that show that Dodge is providing the vehicles with the premier reliable and the premier performing part. This switch helps the driver to toggle between the headlights easily as the status of the vehicle light are important in different road conditions hence safety is met. Being applicable to a wide range of Dodge Neon models, the Headlight Switch adds to the convenience and security of the car trip, which is why it should not be missing from the car. Among those the presence of variable intensity of the headlight beams is still significant, as it enables the drivers to have the only set of the headlights appropriate for the varying conditions, such as day or night. The Compact and innovative vehicle, Dodge Neon also receives a boost from this particularly mechanics, making this Headlight Switch one of the most reliable and easy to use on the market. While the two generations of the Neon include different improvements, the Headlight Switch is yet a retained factor that support the function of the car. Dodge Neon Headlight Switch proves the concern of the manufacture towards quality of their products as it also serves a very important function to provide drivers the ability to steer safely and effectively. Given today's cut throat competition in the automotive sector it is a considerable merit of the Neon that the Dodge Neon Headlight Switch has been fabricated such that the reliability of the auto part, along with its functionality is something noteworthy, for it keeps in line with the essence of the Neon as an economized compact car with robust underpinnings.

Dodge Neon Headlight Switch Parts and Q&A

Headlamp Switch
5073044AB
Q: How to Maintain the Headlight Switch on Dodge Neon?
A:
Before servicing the switch, lower the A/C outlet registers, hold the outer part of each register with your fingers, rotate it a little more to release it, then pull straight out the outlet and remove it by hand. Then, take the 4 control knobs and pull them straight up, take out the 2 screws in the center of the instrument and pull the bezel up to remove the 4 snaps holding the bezel in place. Remove screws 1 and 2 from the accessory switch bank, pull the bank free and pull the electrical connector from the headlamp leveling switch. Pull on the headlamp leveling switch, wiggling it gently to release it from its holder. While installing, fit the headlamp leveling switch into the accessory switch bank and plug in the electrical connector. Switch on the panel, locate the accessory switch section and put in the 4 retaining screws. Attach the center instrument bezel, replace the screws, fit the 4 HVAC control knobs and finally put the A/C outlet registers on the instrument bezel.
Switch
4794276AA
Q: How to Replace the Headlight Switch on Dodge Neon?
A:
To put in a new headlamp leveling switch, lower the A/C outlet registers all the way, grasp the outlet from its side, rotate it further to pop it off its pivot post, then take it straight out. Following that, get the (4) HVAC control knobs off the shaft, remove the (2) screws in the center of the gauge and straighten the bezel to pop out the (4) retaining clips. Removing the accessory switch bank is next; undo the (2) screws, take it out and disconnect the connector at the headlamp leveling switch. Carefully use a flathead screwdriver to pop the headlamp leveling switch from the mounting clips. First, snap the switch in, connect the electrical wiring and test the newly installed switch. Fix the accessory switch bank to its place, screw down the (4) retaining screws, snap on the center instrument bezel and fasten the center bezel screws. Put on the remaining (4) HVAC control knobs and the A/C outlet registers in the center instrument bezel.