OEM Dodge Neon Wiper Motor

Dodge Neon Wiper Motor Parts and Q&A

• Wiper Motor
  5014798AA
  Q: How to Maintain a Wiper Motor on Dodge Neon?

  A:

  Before servicing the wiper motor, you must remove the wiper module. At this point, put a screwdriver or something similar between the crank and linkage, twist and lift the linkage straight up to detach it from the motor crank. Take out the three screws that hold the motor to the linkage, so the motor can be removed. To install the motor, fasten it to the module, then set and tighten the regular motor mounting screws to 5 - 6 Nm torque (45 - 55 in. lbs.). If you remove the motor crank, take the drive link nut, install it and tighten it to 11 - 12 Nm (98 - 106 in. lbs.). Always place the motor in park before mounting the Wiper Arms. Unilube grease the linkage socket, then place the linkage onto the motor crank and then install the wiper module.
• Wiper Motor
  5014790AA
  Q: How to Service a Wiper Motor on Dodge Neon?

  A:

  Before doing anything else, take out the wiper module when servicing the wiper motor. Now, insert a screwdriver between the crank and linkage, rotate it as you lift it straight up to take it off the motor. With the screws holding the motor to the linkage unscrewed, you can set the motor to the side. To install the motor, take it off the linkage and insert the three motor mounting screws, gently but firmly tightening them to 5 to 6 Nm (45 to 55 in. lbs.). If the motor crank is uninstalled, set and tighten the drive link nut at a torque of 11 to 12 Nm (98 to 106 in. lbs.). Put grease in the linkage socket, fit the linkage to the motor crank and lastly reattach the wiper module.