How is the Steering Column Installed on Dodge Nitro?

You should place the steering column into position in the steering coupler for the initial alignment. After that, install the column harness and link it to the switches and next, direct the shifter interlock cable under the tie straps. Put the column in place over the mounting studs and then use your fingers to tighten up the mounting nuts and bolts. Always tighten the lower nuts first and then the upper nuts, so you do not harm the capsules. Make sure the lower mounting nuts reach 17 Nm (150 in. lbs.) and the upper mounting nuts reach the same torque. Put in the steering column coupler bolt and tighten it at 53 Nm (39 ft. lbs.), before reconnecting the shifter interlock cable. Supply the clock spring, then center it and add it to the column. Connect the upper and lower column shrouds and set screws into place. Put the steering column opening cover into place. When installing the steering wheel, replace the old bolt, make sure the bolt is tight and tighten it to the right torque based on the manual. Plug the steering wheel into its mount and tighten the bolt to the value noted in the manual (usually 54 Nm or 40 ft. lbs.). If your vehicle includes cruise control, join the clock spring harness to the cruise control switch harness. At last, put in the air bag and reattach the negative cable to the battery.

OEM Dodge Nitro Steering Column

Steering Column Tilt

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Steering Column found

View related parts
Dodge Nitro Steering Column Part Number: 5057349AF
$177.88 MSRP: $262.00
You Save: $84.12 (33%)
ADD TO CART
Product Specifications
- Other Name: Column - Steering; Column Steering
- Replaces: 5057349AE, 5057349AC, 5057349AB, 5057349AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2011 Dodge Nitro | Detonator, Heat, R/T, SE, SLT, SXT, Shock | 3.7L V6, 4.0L V6, 6 Cyl 3.7 L GAS, 6 Cyl 4.0 L GAS

Dodge Nitro Steering Column

Choose OEM Steering Column that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each Steering Column follows strict manufacturing steps to lock in quality and fit. If your Dodge Nitro matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Nitro parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

Hence, the Dodge Nitro Steering Column is one of the crucial parts, which portrays the strength of this brand. Basically, this steering column joins the steering operating wheel to the steering equipment so as to smoothly translate steering angles and torques in a way that is imperative to the overall vehicle reaction. Mainly focused on safety issues, a package of features of the Dodge Nitro Steering Column consists of the collapsible design, which effectively redistributes energy during accidents, increasing the level of safety of passengers and drivers. It also has a tolerance ring and universal joints that help in reverberating the shock energy and adding on to the efficiency of the Nitro. This steering column fits for the Nitro models manufactured between 2007 and 2012, and is an essential component affecting the car's functionality, as it complies with the federal requirements in terms of theft protection and safety. The Dodge Steering Column not only accommodates the driver adjustments but also plays the role of supporting several components, which expounds its importance in the general structure of the car. The designing of the Nitro and its assembling are quite solidifying and therefore, the durability and performance criteria of the compact SUV segment remains with Jeep Nitro. Also, the Dodge Steering Column is considerably valuable since it contributes to increasing the efficiency of driving and providing safety aspects for a vehicle. All in all, the Dodge Nitro Steering Column demonstrates that Dodge really cares about the quality and innovation of the Nitro and the vehicle will always be remembered in automotive industry.

Dodge Nitro Steering Column Parts and Q&A

Steering Column
5057349AF
Q: How is the Steering Column Installed on Dodge Nitro?
A:
You should place the steering column into position in the steering coupler for the initial alignment. After that, install the column harness and link it to the switches and next, direct the shifter interlock cable under the tie straps. Put the column in place over the mounting studs and then use your fingers to tighten up the mounting nuts and bolts. Always tighten the lower nuts first and then the upper nuts, so you do not harm the capsules. Make sure the lower mounting nuts reach 17 Nm (150 in. lbs.) and the upper mounting nuts reach the same torque. Put in the steering column coupler bolt and tighten it at 53 Nm (39 ft. lbs.), before reconnecting the shifter interlock cable. Supply the Clock Spring, then center it and add it to the column. Connect the upper and lower column shrouds and set screws into place. Put the steering column opening cover into place. When installing the Steering Wheel, replace the old bolt, make sure the bolt is tight and tighten it to the right torque based on the manual. Plug the steering wheel into its mount and tighten the bolt to the value noted in the manual (usually 54 Nm or 40 ft. lbs.). If your vehicle includes cruise control, join the clock spring harness to the cruise control switch harness. At last, put in the Air Bag and reattach the negative cable to the battery.