How to Install a Tie Rod End on Dodge Nitro?

You should match the number of turns on the outer tie rod end attachment to the number of turns used when removing it. After that, join the outer tie rod end to the knuckle and turn the nut to a tightness of 41 Nm (30 ft.lbs.) and another 90° turn. Tighten down the jam nut to the value of 75 Nm (55 ft.lbs) next. After that, install the tire and wheel together. Next, adjust your toes back to the beginning and get the steering wheel in the center.

How to Remove and Replace a Tie Rod End on Dodge Nitro?

You should lift and support your car, remove the tire and wheel and mark the old tie rod end from the outside for use when setting the new end in. Loose the jam nut on the tie rod end and remove the outer tie rod end nut. Always follow the instruction to use only the required tool, so you do not harm the ball joint seal or knuckle during disassembly. With tool 9360 (2), remove the outer tie rod end (1) from the knuckle (3) and tally the number of turns for installation. Last, take out the outer tie rod end (1) attached to the inner tie rod.

OEM Dodge Nitro Tie Rod End

Steering Rod End

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Tie Rod Ends found

View related parts
Dodge Nitro Outer Tie Rod, Passenger Side Part Number: 52125366AA
$74.43 MSRP: $114.00
You Save: $39.57 (35%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Tie Rod - Outer; Steering Tie Rod End, Right Outer; Drag Link Repair Kit; Outer Tie Rod End; Tie Rod End Outer; Tie Rod End
- Position: Outer Passenger Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2011 Dodge Nitro | Detonator, Heat, R/T, SE, SLT, SXT, Shock | 6 Cyl 3.7 L GAS, 6 Cyl 4.0 L GAS
View related parts
Dodge Nitro Outer Tie Rod, Driver Side Part Number: 52125367AA
$51.94 MSRP: $114.00
You Save: $62.06 (55%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Tie Rod - Outer; Steering Tie Rod End, Left Outer; Drag Link Repair Kit; Outer Tie Rod End; Tie Rod End Outer; Tie Rod End
- Position: Outer Driver Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2011 Dodge Nitro | Detonator, Heat, R/T, SE, SLT, SXT, Shock | 6 Cyl 3.7 L GAS, 6 Cyl 4.0 L GAS

Dodge Nitro Tie Rod End

Choose OEM Tie Rod End that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each Tie Rod End follows strict manufacturing steps to lock in quality and fit. If your Dodge Nitro matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Nitro parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

In Dodge Nitro vehicles, the Tie Rod End happens to be an important component in steering system that connects the rack housing to the knuckles. This connection is critical to extend the stability of the car as well as offering a means of providing accurate direction to the vehicle. Tie Rod Ends, the Inner and Outer Working together to provide steering responsiveness, are used in Dodge Nitro. The Dodge Nitro has probably encountered different types of Tie Rod Ends throughout the years, though there is no indication of the respective alterations. The main purpose is also the same in these types, which ensures adequate steering performance is achievable at all times. In general, the Tie Rod End is crucial to the Dodge Nitro's steering and reliability, which is why it is considered an essential part of the car's steering system.

Dodge Nitro Tie Rod End Parts and Q&A

Outer Tie Rod, Driver Side
52125367AA
Q: How to Install a Tie Rod End on Dodge Nitro?
A:
You should match the number of turns on the outer tie rod end attachment to the number of turns used when removing it. After that, join the outer tie rod end to the knuckle and turn the nut to a tightness of 41 Nm (30 ft.lbs.) and another 90° turn. Tighten down the jam nut to the value of 75 Nm (55 ft.lbs) next. After that, install the tire and wheel together. Next, adjust your toes back to the beginning and get the Steering Wheel in the center.
Outer Tie Rod, Passenger Side
52125366AA
Q: How to Remove and Replace a Tie Rod End on Dodge Nitro?
A:
You should lift and support your car, remove the tire and wheel and mark the old tie rod end from the outside for use when setting the new end in. Loose the jam nut on the tie rod end and remove the outer tie rod end nut. Always follow the instruction to use only the required tool, so you do not harm the Ball Joint seal or knuckle during disassembly. With tool 9360 (2), remove the outer tie rod end (1) from the knuckle (3) and tally the number of turns for installation. Last, take out the outer tie rod end (1) attached to the inner tie rod.