JeepParts
My Garage
My Account
Cart
OEM Dodge Ram 1500 Antenna Cable
Radio Antenna Cable- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
10 Antenna Cables found
Dodge Ram 1500 Antenna Cable Part Number: 56043089AF
$48.84 MSRP: $72.40You Save: $23.56 (33%)
Dodge Ram 1500 Antenna Cable Part Number: 56043019AC
$68.43 MSRP: $105.00You Save: $36.57 (35%)
Dodge Ram 1500 Antenna Cable Part Number: 5064491AD
$21.04 MSRP: $26.70You Save: $5.66 (22%)Ships in 1-2 Business Days
Dodge Ram 1500 Antenna Cable Part Number: 5064494AC
$5.56 MSRP: $11.75You Save: $6.19 (53%)Ships in 1-2 Business Days
Dodge Ram 1500 Antenna Cable Part Number: 5064495AB
$7.81 MSRP: $16.50You Save: $8.69 (53%)Ships in 1-2 Business DaysDodge Ram 1500 Antenna Cable Part Number: 5064511AB
$12.47 MSRP: $19.75You Save: $7.28 (37%)Ships in 1-2 Business Days
Dodge Ram 1500 Antenna Cable Part Number: 5064668AC
$12.62 MSRP: $20.00You Save: $7.38 (37%)Ships in 1-2 Business DaysDodge Ram 1500 Antenna Cable Part Number: 5064510AD
Dodge Ram 1500 Antenna Cable Part Number: 56043019AB
Dodge Ram 1500 Antenna Cable Part Number: 56043039AB
Dodge Ram 1500 Antenna Cable
Choose OEM Antenna Cable that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each Antenna Cable follows strict manufacturing steps to lock in quality and fit. If your Dodge Ram 1500 matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Ram 1500 parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.
Dodge Ram 1500 Antenna Cable Parts and Q&A
- Q: How to Install an Antenna Cable for Satellite Systems on Dodge Ram 1500?A:First, run the new harness above the primary harness and afterward, join the cable at each end. Insert the carpet and place the B-pillar lower trim panel in next, then after removing the C-pillar upper trim panel, fasten the B-pillar upper panel. The next step is to put the headliner in place and link the negative Battery Cable. Before mounting other equipment, anchor the Antenna base securely to your roof and then pair the antenna bracket with the fastener to the mounting bracket. Connect the antenna cable to the module and position the antenna on the stick, as you are doing so, be sure to secure the antenna to the stick with the assembly screws provided with your purchase. To attach the video cable from the antenna to the module, run the cable like the other harness, fasten the antenna base, bracket and mast, connect the module's antenna cable, install the headliner and attach the negative battery cable. The signal cable from the radio should be run to the cowl. Next, fix the new harness, assemble the radio, Glove Box, passenger side cowl trim and passenger side scuff plates and then connect the negative battery cable. Loop the new harness from the coewl area to the rear interior ceiling, attach the antenna coming from the video module, set up the passenger side cowl trim panel and scuff plates and affix the headliner.
- Q: How to Safely Remove an Antenna Cable on Dodge Ram 1500?A:You should disconnect and isolate the battery negative cable to take out the satellite Antenna cable. Ease up on the rear piece of the headliner so you can work under the satellite antenna. Take off the upper and lower B-pillar panels from the inside, then move the carpet to reach the cable and separate both its ends. Once more, cut off the head to the satellite audio/video audio cable, isolate the negative Battery Cable, move down the headliner and free the antenna cable from the module without pulling on the connector. Open the antenna and pull out the screw from the mounting bracket, next remove the bracket and base from the roof. To remove the video cable from the antenna to the module, separate the negative battery cable, lower the headliner and unplug the antenna cable from the module. For the signal cable on the radio's end, remove the battery's negative cable, then pull away the passenger side scuff plates and cowl panel and finish by taking out the Glove Box and radio. Next, for the video antenna power cable from the cowl to the aerodynamic trim at the back, pull the negative battery cable away from the battery, go under the headliner with a friend to unmount the video antenna, remove the passenger side scuff plates and cowl panel and remove the video antenna's plug from the back of the roof panel unit.
Related Dodge Ram 1500 Parts
Dodge Ram 1500 MAP Sensor
Dodge Ram 1500 Antenna
Dodge Ram 1500 Ignition Coil
Dodge Ram 1500 Knock Sensor
Dodge Ram 1500 Throttle Position Sensor
Dodge Ram 1500 Wiper Switch
Dodge Ram 1500 Antenna Mast
Dodge Ram 1500 Brake Light Switch
Dodge Ram 1500 Car Key
Dodge Ram 1500 Dimmer Switch
Dodge Ram 1500 Distributor Rotor
Dodge Ram 1500 Neutral Safety Switch