Please disconnect and block the negative
Battery Cable first and once the
Air Bag system has dispensed its charge, wait two minutes before starting work on the air bag or instrument panel. Take the center bezel off and then take out the screws holding the heated seat switch bezel to the center bezel on the instrument panel. Remove both switches and the whole switch bezel in one step. First lift the cover from inside at the back of the heated seat, then push the heated seat switch towards you through the front of the bezel. Make sure the switches go into the proper holes in the heated seat switch bezel because the keyway on the connector receptacle and on the housing are not the same. Through the front part of the bezel, move the heated seat switch into position, secure the heated seat switch bezel in the middle of the instrument panel center bezel and insert the retaining screws. Connect the center bezel on the instrument panel, connect the negative battery cable and see if everything in the vehicle is working correctly.