How to Maintain and Fix a Neutral Safety Switch on Dodge Ram 1500?

Before servicing the Neutral Safety Switch, you should lift the car and put a pan underneath the switch. Take the wires off the switch and remove the switch from the box following all instructions carefully. Once the shifter is in Park and Neutral, place the switch operating lever fingers so they are in the center of the switch opening in the case. Replace the seal on the switch and install the switch in the case, making sure you tighten it to 34 Nm or 25 ft. lbs. Attach the test lamp to the switch to test it at 12V, link the wires and gently lower your car. Also, pay attention to filling the transmission fluid level to its proper level.

How to Service and Repair the Neutral Safety Switch in the 45RFE/545RFE Automatic Transmission on Dodge Ram 1500?

Make sure to remove the valve body from the transmission to service and repair the Transmission Position Switch/Sensor of the 45RFE/545RFE transmission. Afterward, remove the bolts attached to the transmission solenoid/TRS assembly on the valve body and pull the assembly out. Hold the TRS selector plate in PARK for the installation, attach the transmission solenoid/TRS assembly to the valve body so both alignment dowels are secure and check that the TRS switch contacts match the selector plate. Install bolts to connect the transmission solenoid/TRS assembly to the valve body and tighten the screws beside the arrows cast on the bottom of the valve body to 6 Nm (50 inch lbs.), with the rest of the screws getting the same attention. After everything else is done, replace the valve body in the transmission. When you change the Transmission Solenoid/TRS Assembly, be sure to do the Quick Learn Procedure.

OEM Dodge Ram 1500 Neutral Safety Switch

Transmission Neutral Safety Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Neutral Safety Switches found

View related parts
Dodge Ram 1500 Neutral Safety Switch Part Number: 56028181AC
Product Specifications
- Other Name: Switch - Neutral, Safety, Back Up
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1998-2001 Dodge Ram 1500 | Laramie, SLT, SS/T 5.9L, ST, Sport, WS | 6 Cyl 3.9 L GAS, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS
View related parts
Dodge Ram 1500 Neutral Safety Switch Part Number: 56045489AC
Product Specifications
- Other Name: Switch - Neutral, Safety, Back Up; Switch Neutral Safety, Back Up
- Replaces: 56045489AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2002-2006 Dodge Ram 1500 | Laramie, SLT, SRT-10, ST | 10 Cyl 8.3 L GAS, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 5.9 L GAS
View related parts
Dodge Ram 1500 Neutral Safety Switch Part Number: 3747361AB
Product Specifications
- Other Name: Switch - Neutral Safety, Back Up; Range Sensor; Back-Up Switch
- Replaces: 3747361, P5007747, P5007747AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1994-1999 Dodge Ram 1500 | Base, LT, Laramie, SS/T 5.9L, ST, Sport, WS | 3.9L V6, 5.2L V8, 5.9L V8, 6 Cyl 3.9 L GAS, 8 Cyl 5.2 L CNG, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS

Dodge Ram 1500 Neutral Safety Switch

Choose OEM Neutral Safety Switch that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each Neutral Safety Switch follows strict manufacturing steps to lock in quality and fit. If your Dodge Ram 1500 matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Ram 1500 parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

A Ram 1500 is an exceptional automobile when it comes to reliability and performance and one of the part that boosts safety as well as efficiency is the Neutral Safety Switch part. This component makes it impossible for the Drive Dodge Ram 1500 to start unless the car is in the neutral or the parking lot, reducing the chance of an accident and endangering the car's transmission. Through the retrospect of the years, it has been depicted that several models of Ram 1500 use distinct types of Neutral Safety Switches, which employ certain mechanisms that are part of the functionality of the said vehicle. The Dodge Ram 1500 for its part proves that its past records do not lie; its Neutral Safety Switch also performs well in ensuring the safety features that defines this full-size truck. The compatibility with a vast array of Ram 1500 models guarantees that drivers will have to depend on this component regardless of the generation, thus increasing the efficiency of the vehicle's functionality. In particular, an element like the Dodge Ram 1500's Neutral Safety Switch can be recognized in the automotive market as one of the sturdiest and most reliable on the market; something that is of benefit to any truck owner. Based on its features focused on safety and performance of the vehicle, it can be noted that Neutral Safety Switch is one of Dodge's most valuable and significant products reflecting its adherence to quality and innovation. In conclusion, this article has shown that the Dodge Ram 1500, backed with its effective Neutral Safety Switch, is the optimal pick for the power-loving truck consumers.

Dodge Ram 1500 Neutral Safety Switch Parts and Q&A

Neutral Safety Switch
56028181AC
Q: How to Maintain and Fix a Neutral Safety Switch on Dodge Ram 1500?
A:
Before servicing the Neutral Safety Switch, you should lift the car and put a pan underneath the switch. Take the wires off the switch and remove the switch from the box following all instructions carefully. Once the shifter is in Park and Neutral, place the switch operating lever fingers so they are in the center of the switch opening in the case. Replace the seal on the switch and install the switch in the case, making sure you tighten it to 34 Nm or 25 ft. lbs. Attach the test lamp to the switch to test it at 12V, link the wires and gently lower your car. Also, pay attention to filling the transmission fluid level to its proper level.
Neutral Safety Switch
56045489AC
Q: How to Service and Repair the Neutral Safety Switch in the 45RFE/545RFE Automatic Transmission on Dodge Ram 1500?
A:
Make sure to remove the valve body from the transmission to service and repair the Transmission Position Switch/Sensor of the 45RFE/545RFE transmission. Afterward, remove the bolts attached to the transmission solenoid/TRS assembly on the valve body and pull the assembly out. Hold the TRS selector plate in PARK for the installation, attach the transmission solenoid/TRS assembly to the valve body so both alignment dowels are secure and check that the TRS switch contacts match the selector plate. Install bolts to connect the transmission solenoid/TRS assembly to the valve body and tighten the screws beside the arrows cast on the bottom of the valve body to 6 Nm (50 inch lbs.), with the rest of the screws getting the same attention. After everything else is done, replace the valve body in the transmission. When you change the Transmission Solenoid/TRS Assembly, be sure to do the Quick Learn Procedure.