How to Install an Oil Pan on Dodge Ram 1500?

First, clean the area where the gasket will attach on both the bed and oil pan, check the gasket and change it if it is damaged. Put in the gasket/windage tray assembly (2) and slide the oil pickup tube into the engine, tightening its nuts to 28 Nm (20 ft. lbs.). Should you remove it, install the stud into position No. 9. After that, fit the oil pan on top and bolt it in place with the mounting bolts and a nut (1-17). Tighten them to 15 Nm (11 ft. lbs.) in the proper order. Hand the engine down into its mounts using tool 8534B and separately fasten the left and right mounts through bolts to a tightness of 68 Nm (50 ft. lbs.). Take out special tool 8534B and assemble the cooler lines into the radiator, transmission and clips and remember to replace the line clip on the oil pan stud because of its reduced strength when coming off. Should you have this available, mount the structural dust cover and the front crossmember. Add oil to the engine, join the negative battery cable and start the engine, then check for any leaks before you drive.

How to remove an oil pan on Dodge Ram 1500?

Before you remove the engine oil pan, unscrew the negative cable from the battery. At this point, do not raise the engine; simply install engine support fixture special tool # 8534. Work both of the engine mounts loose by turning the mounting bolts, but leave them in place. If the car has a structural dust cover, remove it and drain out the engine oil. Only raise the engine enough to remove the oil pan and while doing so, verify that the fan shroud clearance to fan and cowl to the manifold is good. Use special tool 8534 to lift the engine and make the required room to take out the oil pan. Do not try forcing the oil pan or oil pan gasket away from the windage tray, as the gasket is part of the windage tray. Take out the bolts around the oil pan, then remove the oil pan itself and finally unbolt and remove the oil pump pickup tube. Check the windage tray and the gasket; if necessary, you should replace them.

OEM Dodge Ram 1500 Oil Pan

Oil Drain Pan

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

9 Oil Pans found

View related parts
Dodge Ram 1500 Oil Pan Part Number: 53021334AF
$269.65 MSRP: $401.00
You Save: $131.35 (33%)
ADD TO CART
Product Specifications
- Other Name: Pan - Engine Oil; Engine Oil Pan; Pan Engine Oil
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2003-2010 Dodge Ram 1500 | Laramie, SLT, ST, SXT, Sport, TRX, TRX4 | 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
Dodge Ram 1500 Oil Pan Part Number: 53020902AB
$248.13 MSRP: $367.00
You Save: $118.87 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pan - Engine Oil; Engine Oil Pan; Pan Engine Oil
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2005-2010 Dodge Ram 1500 | Laramie, SLT, ST, SXT, TRX, TRX4 | 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS
View related parts
Dodge Ram 1500 Oil Pan Part Number: 53021779AC
$144.87 MSRP: $218.00
You Save: $73.13 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pan - Engine Oil; Engine Oil Pan
- Replaces: 53021000AC, 53021000AD, 53021779AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2002-2010 Dodge Ram 1500 | Laramie, SLT, ST, SXT | 3.7L V6, 6 Cyl 3.7 L GAS
View related parts
Dodge Ram 1500 Oil Pan Part Number: 53020914AB
Product Specifications
- Other Name: Pan - Engine Oil; Engine Oil Pan; Pan Engine Oil
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2002-2003, 1998-1999 Dodge Ram 1500 | Laramie, SLT, SS/T 5.9L, ST, Sport | 8 Cyl 5.9 L GAS
View related parts
Dodge Ram 1500 Oil Pan Part Number: 53020918
Product Specifications
- Other Name: Pan - Engine Oil; Engine Oil Pan; Pan, Oil, Partial; Pan Engine Oil
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1994-2001 Dodge Ram 1500 | Base, LT, Laramie, SLT, SS/T 5.9L, ST, Sport | 8 Cyl 5.2 L CNG, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS
View related parts
Dodge Ram 1500 Oil Pan Part Number: 53020920
Product Specifications
- Other Name: Pan - Engine Oil; Engine Oil Pan; Pan, Oil, Partial; Pan Engine Oil
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1994-2001 Dodge Ram 1500 | Base, LT, Laramie, ST, Sport, WS | 6 Cyl 3.9 L GAS
View related parts
Dodge Ram 1500 Oil Pan Part Number: 53020678AD
Product Specifications
- Other Name: Pan - Engine Oil; Engine Oil Pan; Oil Pan Gasket
- Replaces: 53020678AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2002-2004 Dodge Ram 1500 | Laramie, SLT, ST | 4.7L V8, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS
View related parts
Dodge Ram 1500 Oil Pan Part Number: 5037607AC
Product Specifications
- Other Name: Pan - Engine Oil; Engine Oil Pan
- Replaces: 5037607AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006 Dodge Ram 1500 | SRT-10 | 10 Cyl 8.3 L GAS, 8.3L V10
View related parts
Dodge Ram 1500 Oil Pan Part Number: 5037413AF
Product Specifications
- Other Name: Pan - Engine Oil; Engine Oil Pan
- Replaces: 5037413AC, 5037413AB, 5037413AE, 5037413AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2004-2005 Dodge Ram 1500 | SRT-10 | 10 Cyl 8.3 L GAS, 8.3L V10

Dodge Ram 1500 Oil Pan

Choose OEM Oil Pan that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each Oil Pan follows strict manufacturing steps to lock in quality and fit. If your Dodge Ram 1500 matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Ram 1500 parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

Dodge Ram 1500 vehicles' Oil Pan acts as a receptacle of the engine oil that aids in functioning of various mechanical parts through lubrication. The Dodge ram 1500 is incorporated with the oil pan which has high volume of oil for it to be used for acceleration, besides it has to withstand various centrifugal forces in circumstances such as when cornering faster. The Dodge Ram 1500 Oil Pan is made of steel, but because of its location, it can easily get damaged and therefore, can leak from scratches, cracks or dents. Oil change and proper inspection of the drain plug, bolts, and gasket make it easier to correct any signs of corrosion and the general durability of the Oil Pan is encouraged. Also, installing a protective skid plate on the Dodge Ram 1500 can provide an extra layer of protection on the Oil Pan from the road perils, thus improving the general toughness of the pickup truck as well as creating improved off-road performance.

Dodge Ram 1500 Oil Pan Parts and Q&A

Oil Pan
53020902AB
Q: How to Install an Oil Pan on Dodge Ram 1500?
A:
First, clean the area where the gasket will attach on both the bed and oil pan, check the gasket and change it if it is damaged. Put in the gasket/windage tray assembly (2) and slide the oil pickup tube into the engine, tightening its nuts to 28 Nm (20 ft. lbs.). Should you remove it, install the stud into position No. 9. After that, fit the oil pan on top and bolt it in place with the mounting bolts and a nut (1-17). Tighten them to 15 Nm (11 ft. lbs.) in the proper order. Hand the engine down into its mounts using tool 8534B and separately fasten the left and right mounts through bolts to a tightness of 68 Nm (50 ft. lbs.). Take out special tool 8534B and assemble the cooler lines into the Radiator, transmission and clips and remember to replace the line clip on the oil pan stud because of its reduced strength when coming off. Should you have this available, mount the structural dust cover and the front crossmember. Add oil to the engine, join the negative Battery Cable and start the engine, then check for any leaks before you drive.
Oil Pan
53021334AF
Q: How to remove an oil pan on Dodge Ram 1500?
A:
Before you remove the engine oil pan, unscrew the negative cable from the battery. At this point, do not raise the engine; simply install engine support fixture special tool # 8534. Work both of the engine mounts loose by turning the mounting bolts, but leave them in place. If the car has a structural dust cover, remove it and drain out the engine oil. Only raise the engine enough to remove the oil pan and while doing so, verify that the fan shroud clearance to fan and cowl to the manifold is good. Use special tool 8534 to lift the engine and make the required room to take out the oil pan. Do not try forcing the oil pan or oil pan gasket away from the windage tray, as the gasket is part of the windage tray. Take out the bolts around the oil pan, then remove the oil pan itself and finally unbolt and remove the oil pump pickup tube. Check the windage tray and the gasket; if necessary, you should replace them.