To change the passenger heated seat switch, disconnect the negative
Battery Cable first. Pull the instrument panel center bezel away and take out the screws that hold the heated seat switch bezel to it. Lift out the heated seat bezel and the two switches in one step. Pull the switch away from the back of the heated seat switch bezel and gently push it through the front. Be sure to install the heated seat switches in the proper holes of the bezel; the switch on the driver's side-which has the keyway close to the bottom on its connector-should go in the left mounting hole, while the switch for the passenger-where the key is at the top-should be put in the right mounting hole. After heating the heated seat switch, place the switch in through the front of the bezel, snap on the heated seat switch bezel and secure it with retaining screws. Afterward, fix the center bezel over the instrument panel and make sure the negative battery cable is hooked up.