How to Service a Turn Signal Switch on Dodge Ram 3500?

In servicing the turn signal switch, disconnect and isolate the battery negative cable and wait at least two minutes to deactivate the Supplemental Restraint System (SRS) to prevent an inadvertent air bag deployment from sending power to the system capacitor. Start by unscrewing the bolt that holds the tilt steering column knob and remove it from the left-hand tilt actuator on the column. Next, remove the two outboard screws that secure the upper column shroud to the lower shroud from below the steering column. To detach the upper shroud, press inward on both sides of the upper shroud, above the parting line of the lower shroud to release the snap features. Next, unscrew the center screw that attaches the lower shroud to the steering column and remove the lower shroud. The wire harness connector must be disconnected from the back of the switch housing. Rotate the steering wheel to access and remove the two screws holding the switch to the multi-function switch mounting housing. Most importantly, the operator must take the switch control stalk in hand and pull the stalk towards the left hand side of the vehicle to remove the switch from the mounting housing.

OEM Dodge Ram 3500 Turn Signal Switch

Turn Signal Indicator Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Turn Signal Switches found

View related parts
Dodge Ram 3500 Multifunction Switch Part Number: 56046114AF
$154.09 MSRP: $231.00
You Save: $76.91 (34%)
ADD TO CART
Product Specifications
- Other Name: Switch - Multifunction; Turn Signal & Combination Lever; Windshield Washer Switch.; Wiper Switch; Switch Multifunction
- Replaces: 56046114AD, 56046114AC, 56046114AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2010 Dodge Ram 3500 | Laramie, SLT, ST | 6 Cyl 6.7 L DIESEL, 6.7L L6
View related parts
Dodge Ram 3500 Ignition Switch Part Number: 4728424
Product Specifications
- Other Name: Switch - Multifunction; Turn Signal & Combination Lever; Steering Column Housing; Windshield Washer Switch.; Turn Signal Switch; Multifunction, Wiper, Headlamp Dimmer, Hazard, Signal & Tilt options.
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1994-2002 Dodge Ram 3500 | Base | 10 Cyl 8.0 L GAS, 6 Cyl 5.9 L DIESEL, 8 Cyl 5.9 L GAS
View related parts
Dodge Ram 3500 Turn Signal Switch Part Number: 56049823AB
Product Specifications
- Other Name: Switch - Multifunction; Turn Signal & Combination Lever; Steering Column Switch; Air Bag Clockspring.; Multifunction Switch; Switch Housing; Ignition Housing; Clockspring; Switch Multifunction
- Replaces: 56045515AA, 56049823AA, 56045165AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2003-2010 Dodge Ram 3500 | Laramie, SLT, Sport, ST, SXT, TRX4 | 10 Cyl 8.0 L GAS, 5.7L V8, 5.9L L6, 6 Cyl 5.9 L DIESEL, 6 Cyl 6.7 L DIESEL, 6.7L L6, 8 Cyl 5.7 L GAS, 8.0L V10

Dodge Ram 3500 Turn Signal Switch

Choose OEM Turn Signal Switch that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each Turn Signal Switch follows strict manufacturing steps to lock in quality and fit. If your Dodge Ram 3500 matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Ram 3500 parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

Dodge Ram 3500 Turn Signal Switch Parts and Q&A

Turn Signal Switch
56049823AB
Q:
How to Service a Turn Signal Switch on Dodge Ram 3500?
A:
In servicing the turn signal switch, disconnect and isolate the battery negative cable and wait at least two minutes to deactivate the Supplemental Restraint System (SRS) to prevent an inadvertent air bag deployment from sending power to the system capacitor. Start by unscrewing the bolt that holds the tilt steering column knob and remove it from the left-hand tilt actuator on the column. Next, remove the two outboard screws that secure the upper column shroud to the lower shroud from below the steering column. To detach the upper shroud, press inward on both sides of the upper shroud, above the parting line of the lower shroud to release the snap features. Next, unscrew the center screw that attaches the lower shroud to the steering column and remove the lower shroud. The wire harness connector must be disconnected from the back of the switch housing. Rotate the steering wheel to access and remove the two screws holding the switch to the multi-function switch mounting housing. Most importantly, the operator must take the switch control stalk in hand and pull the stalk towards the left hand side of the vehicle to remove the switch from the mounting housing.