How to Safely Service and Install an Air Bag Sensor on Dodge Ram 3500?

Before you handle the front impact sensor, stop the car's Supplemental Restraint System (SRS) by disconnecting and isolating the negative battery cable. After that, wait for two minutes so the system capacitor can discharge. Be gentle with the front impact sensor so it doesn't get hit or fall, as such damage can affect its performance; if it gets dropped it needs to be swapped for a new one. Place the sensor near the engine and plug the headlamp and dash wire harness back into the sensor. Put the sensor behind the right or left end of the lower radiator crossmember (1), so that the pin in the sensor goes through the clearance hole in the crossmember. Insert the sensor pin into the mounting hole and tighten screw (4) until it reaches 10 Nm (90 in. lbs.). After servicing any SRS component, do not reconnect the negative battery cable until the SRS verification test procedure is done.

OEM Dodge Ram 3500 Air Bag Sensor

Air Bag Impact Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Air Bag Sensors found

View related parts
Dodge Ram 3500 Impact Sensor, Outer Part Number: 68056160AA
$158.62 MSRP: $234.00
You Save: $75.38 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Impact; Air Bag Impact Sensor, Outer, Rear; Air Bag Sensor; Side Impact Sensor; Sensor for Side Airbag Impact and B/C Pillar.
- Position: Outer
- Replaces: 4896153AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2010 Dodge Ram 3500 | Laramie, SLT, ST | 6 Cyl 6.7 L DIESEL
View related parts
Dodge Ram 3500 Impact Sensor Part Number: 56006911
Product Specifications
- Other Name: Sensor Air Bag; Air Bag Sensor; Front Sensor; Sensor, Air Bag Crash
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1994-1997 Dodge Ram 3500 | Base | 10 Cyl 8.0 L GAS, 6 Cyl 5.9 L DIESEL, 8 Cyl 5.9 L GAS
View related parts
Dodge Ram 3500 Side Impact Sensor Part Number: 56043167AB
Product Specifications
- Other Name: Sensor - Impact; Air Bag Impact Sensor; Air Bag Sensor; Diagnostic Module; Side Sensor
- Replaces: 56043167AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2004-2009 Dodge Ram 3500 | Laramie, SLT, ST, SXT, Sport, TRX4 | 5.7L V8, 5.9L L6, 6 Cyl 5.9 L DIESEL, 6 Cyl 6.7 L DIESEL, 6.7L L6, 8 Cyl 5.7 L GAS

Dodge Ram 3500 Air Bag Sensor

Choose OEM Air Bag Sensor that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each Air Bag Sensor follows strict manufacturing steps to lock in quality and fit. If your Dodge Ram 3500 matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Ram 3500 parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

Dodge Ram 3500 Air Bag Sensor is a crucial model that defines the car as safe and reliable among the brand models. This advanced Air Bag Sensor will be used to determine impacts and set off the air bags with a view of protecting passengers in cases of collisions. Responsible for performance, Dodge Ram 3500 Air Bag Sensor relays information to the control unit and hence provides a fast response in an emergency. This sensor is suitable for the different models of Dodge Ram 3500, and improves on the performance as well as the security of the vehicle, thus acting as a necessity in the vehicle. The Dodge Ram 3500 is a model of a pick up truck that has undergone through years of production, changes in the mechanical and electrical features and the Air Bag Sensor is not left out as it contains mechanisms that enable it to work optimally. Hhuh, specifically, some of the most popular and international known products of Dodge include the Dodge Ram 3500 Air Bag Sensor, which is easily distinguishable from its competitors in the automotive market due to the factors such as its dimensions and well-established record of being effective. Being an important component of the Dodge Ram 3500 whose mechanical and engineering features give it a heavy-duty design, the Air Bag Sensor enhances the safety aspect of occupants; this gives credence to the pickup's position within the full-size pickup market segment. To sum up, it is crucial to note that the Dodge Ram 3500 Air Bag Sensor is much more than a safety component; it is a demonstration of Dodge's commitment to delivering the prime quality vehicle for every driver and passenger out there to safely and efficiently travel the roads.

Dodge Ram 3500 Air Bag Sensor Parts and Q&A

Side Impact Sensor
56043167AB
Q: How to Safely Service and Install an Air Bag Sensor on Dodge Ram 3500?
A:
Before you handle the front impact sensor, stop the car's Supplemental Restraint System (SRS) by disconnecting and isolating the negative Battery Cable. After that, wait for two minutes so the system capacitor can discharge. Be gentle with the front impact sensor so it doesn't get hit or fall, as such damage can affect its performance; if it gets dropped it needs to be swapped for a new one. Place the sensor near the engine and plug the headlamp and dash wire harness back into the sensor. Put the sensor behind the right or left end of the lower radiator crossmember (1), so that the pin in the sensor goes through the clearance hole in the crossmember. Insert the sensor pin into the mounting hole and tighten screw (4) until it reaches 10 Nm (90 in. lbs.). After servicing any SRS component, do not reconnect the negative battery cable until the SRS verification test procedure is done.