How to service and repair the Front Cross-Member on Dodge Ram 3500 Van?

Start with removing the front springs, sway bar, outer tie rod ends and brake rotors to work on the front crossmember. If your vehicle is equipped with anti-lock sensors, loosen both the brake rotor dust shield/backing plates and these sensors. Set Tool C-3487-A underneath the engine, using frame hooks or a similar tool and take out the lower engine-mount nuts as well as the mounting bolts for the crossmember. With the old crossmember removed, put the new one in place, install its bolts and tighten them to 115 N.m (85 ft.lbs.). Replace the lower engine-mount nuts next and tighten them to 102 N.m (75 ft.lbs.) before you get rid of the engine support fixture. Tighten all the brake rotor parts and the anti-lock sensor if it is included, then install the brake rotors, connect the outer tie rod ends, position the stabilizer bar and place on the front springs, finishing before aligning.

OEM Dodge Ram 3500 Van Front Cross-Member

Front Engine Cross Member

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Front Cross-Members found

View related parts
Dodge Ram 3500 Van Engine Cradle, Front Part Number: 52019624AC
Product Specifications
- Other Name: Crossmember - Front Suspension; Engine Cradle, Front; Crossmember Front Suspension
- Position: Front
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1999-2003 Dodge Ram 3500 Van | Base | 8 Cyl 5.2 L CNG, 8 Cyl 5.2 L GAS, 8 Cyl 5.2 L LPG, 8 Cyl 5.9 L GAS
View related parts
Dodge Ram 3500 Van Crossmember, Front Part Number: 55346580AE
Product Specifications
- Other Name: Crossmember - Front Floor; Frame Crossmember; Crossmember Front Floor
- Position: Front
- Replaces: 55346580AD, 55346580AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1999-2003 Dodge Ram 3500 Van | Base | 8 Cyl 5.2 L CNG, 8 Cyl 5.2 L GAS, 8 Cyl 5.2 L LPG, 8 Cyl 5.9 L GAS
View related parts
Dodge Ram 3500 Van Crossmember, Front Part Number: 55347255AC
Product Specifications
- Other Name: Crossmember - Front Suspension; Frame Crossmember; Crossmember Front Suspension
- Position: Front
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1999-2003 Dodge Ram 3500 Van | Base | 8 Cyl 5.2 L CNG, 8 Cyl 5.2 L GAS, 8 Cyl 5.2 L LPG, 8 Cyl 5.9 L GAS

Dodge Ram 3500 Van Front Cross-Member

Choose OEM Front Cross-Member that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each Front Cross-Member follows strict manufacturing steps to lock in quality and fit. If your Dodge Ram 3500 Van matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Ram 3500 Van parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

Dodge Ram 3500 Van Front Cross-Member Parts and Q&A

Engine Cradle, Front
52019624AC
Q: How to service and repair the Front Cross-Member on Dodge Ram 3500 Van?
A:
Start with removing the front springs, sway bar, outer tie rod ends and brake rotors to work on the front crossmember. If your vehicle is equipped with anti-lock sensors, loosen both the brake rotor dust shield/backing plates and these sensors. Set Tool C-3487-A underneath the engine, using frame hooks or a similar tool and take out the lower engine-mount nuts as well as the mounting bolts for the crossmember. With the old crossmember removed, put the new one in place, install its bolts and tighten them to 115 N.m (85 ft.lbs.). Replace the lower engine-mount nuts next and tighten them to 102 N.m (75 ft.lbs.) before you get rid of the engine support fixture. Tighten all the brake rotor parts and the anti-lock sensor if it is included, then install the brake rotors, connect the outer tie rod ends, position the stabilizer bar and place on the front springs, finishing before aligning.