OEM Dodge Sprinter 2500 Engine Oil Cooler

Dodge Sprinter 2500 Engine Oil Cooler Parts and Q&A

• Oil Cooler
  68033097AA
  Q:

  How to Install an Engine Oil Cooler on Dodge Sprinter 2500?

  A:

  Before installing the engine oil cooler, attach the gasket inside the housing by placing it in the correct direction and then secure the lower housing. Tighten all mounting bolts equally in two opposite patterns to 25 Nm (18 ft. lbs.). Then, put in a fresh Oil Filter into the oil filter housing, lay the thermostat gasket beneath the thermostat and secure the thermostat housing by tightening all the bolts to 25 Nm (18 ft. lbs.). First, attach the upper radiator hose to the thermostat's housing, then add the accessory drive idler pulley, the accessory drive tensioner and install the accessory Drive Belt. Next, put in the air pump and both the oil and coolant.
• Oil Cooler
  5179360AB
  Q:

  How to Service an Engine Oil Cooler on Dodge Sprinter 2500?

  A:

  The service of the engine oil cooler should begin with taking off the accessory Drive Belt, then the accessory drive tensioner and idler pulley. Remove the oil by pouring it out and then take the old Oil Filter out of the housing. After that, empty the cooling system and take out the air pump. Fboard first pull off the upper radiator hose from the thermostat housing, after that pull out the thermostat housing and lastly take off the oil cooler housing.