How to Remove and Install an EGR Tube on the Intake Manifold and EGR Valve on Dodge Stratus?

EGR valve and the intake manifold plenum are connected by the EGR tube just below the throttle body. The first step is to loosen the screws holding the EGR tube to the intake manifold, then move on to those fixing the EGR tube to the EGR valve and finally remove the tube itself. Wipe the gasket where it meets the EGR valve and clean the grommet in the intake manifold. This time, only the rubber grommet is needed for the old connection to stay, but we should put on a new gasket for the EGR tube to EGR valve link. First, loosely place both the EGR tube and its attachments, then loosely connect the EGR tube to the EGR valve and the intake manifold. Make sure to tighten the screws between the EGR tube and the intake manifold plenum to 11 Nm (95 in. lbs) torque and do the same for the EGR tube and valve screws.

How to Service and Repair an EGR Tube on Dodge Stratus?

When servicing or repairing the EGR tube, discharge the negatively charged battery cable before removing the air cleaner box. After that, eliminate the clamping bolt from the EGR tube at the intake manifold and pull the clamp out of its slot. Remove the two bolts from the EGR valve and next remove the tube and gasket. If there are any defects on the rubber silicone seal in the intake manifold, replace it. While installing, make sure all surfaces are clean and if the intake manifold's rubber silicone seal looks damaged, replace it. Replace the gasket where the EGR tube and EGR valve connect, secure the EGR valve bolts only slightly and fit the clamp in the manifold slot, screwing the bolt to 11.3 Nm (100 in. lbs.). After that, secure the EGR valve bolts to 11.3 Nm (100 in. lbs.), reattach the air cleaner box and attach the negative battery cable again.

OEM Dodge Stratus EGR Tube

EGR Hose

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 EGR Tubes found

View related parts
Dodge Stratus EGR Pipe Part Number: MR340276
Product Specifications
- Other Name: Tube - EGR To Manifold; Exhaust Gas Recirculation (EGR) Tube; Pipe EGR To Manifold
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2005 Dodge Stratus | R/T, SE | 6 Cyl 3.0 L GAS
View related parts
Dodge Stratus EGR Tube Part Number: 4591231
Product Specifications
- Other Name: Tube - Exhaust Gas Recirculation V; Tube; Tube, EGR; Tube EGR
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1995-2000 Dodge Stratus | ES | 6 Cyl 2.5 L GAS
View related parts
Dodge Stratus EGR Tube Part Number: 4669228
Product Specifications
- Other Name: Tube - Exhaust Gas Recirculation V; EGR Pipe; Tube; Tube, EGR Valve To Manifold; Tube EGR
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1995-2000 Dodge Stratus | Base, ES, SE | 4 Cyl 2.0 L GAS
View related parts
Dodge Stratus EGR Tube Part Number: 4591415AB
Product Specifications
- Other Name: Tube - Exhaust Manifold To EGR Valance; Exhaust Gas Recirculation (EGR) Tube
- Replaces: 4591415AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006 Dodge Stratus | 2.7L V6
- 2001-2002 Dodge Stratus | ES, R/T, SE, SE Plus | 2.7L V6, 6 Cyl 2.7 L GAS
View related parts
Dodge Stratus EGR Valve Part Number: 5145612AA
Product Specifications
- Other Name: Package - Exhaust Gas Recirculation; EGR Tube; Tube
- Replaced by: 5145612AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2002 Dodge Stratus | ES, R/T, SE, SE Plus | 6 Cyl 2.7 L GAS

Dodge Stratus EGR Tube

Choose OEM EGR Tube that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each EGR Tube follows strict manufacturing steps to lock in quality and fit. If your Dodge Stratus matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Stratus parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

Dodge Stratus EGR Tube is a part that contributes greatly to the performance as well as the durability of the automobile. A major part of the vehicle exhaust fumes are kicked back into the engine through the EGR Tube, making it quite useful while substantially decreasing the dreaded NOx pollutants. This feature is especially crucial if the examined model belongs to Dodge Stratus series and was manufactured from 1995 through to 2005, as it contributes to the proper functioning of the engine and constant stabilization of combustion processes. This Dodge Stratus EGR Tube shall fit the different models of Stratus cars, thus allowing the drivers to be able to have the required performance regardless of the different engines in the car such as 2.0 L I4 and 2.7 L V6 engines. That is why the effective operation of an EGR Tube is critical as its failure can cause such inconveniences as rough idle and high emissions that can worsen the efficiency and safety of transportation. Habits of daily checkups and cleaning of the Dodge Stratus EGR Tube is very essential to prevent the accumulation of carbon and thus serve the car for a long time. In the automotive market, there are certain features that stand out in the Dodge Stratus EGR Tube these include the reliability and a strong design that influence the efficiency of the car. Thus, with the fuel economy of 20-29 mpg, the Dodge Stratus is focused not only on delivering power but also on the rational spending of money by any driver. Therefore, the Dodge Stratus EGR Tube is an essential component of the car that helps with performance as well as improves the emissions system and results in a comfortable and economical ride for the consumer.

Dodge Stratus EGR Tube Parts and Q&A

EGR Tube
4591231
Q: How to Remove and Install an EGR Tube on the Intake Manifold and EGR Valve on Dodge Stratus?
A:
EGR Valve and the intake manifold plenum are connected by the EGR tube just below the Throttle Body. The first step is to loosen the screws holding the EGR tube to the intake manifold, then move on to those fixing the EGR tube to the EGR valve and finally remove the tube itself. Wipe the gasket where it meets the EGR valve and clean the grommet in the intake manifold. This time, only the rubber grommet is needed for the old connection to stay, but we should put on a new gasket for the EGR tube to EGR valve link. First, loosely place both the EGR tube and its attachments, then loosely connect the EGR tube to the EGR valve and the intake manifold. Make sure to tighten the screws between the EGR tube and the intake manifold plenum to 11 Nm (95 in. lbs) torque and do the same for the EGR tube and valve screws.
EGR Pipe
MR340276
Q: How to Service and Repair an EGR Tube on Dodge Stratus?
A:
When servicing or repairing the EGR tube, discharge the negatively charged Battery Cable before removing the air cleaner box. After that, eliminate the clamping bolt from the EGR tube at the Intake Manifold and pull the clamp out of its slot. Remove the two bolts from the EGR Valve and next remove the tube and gasket. If there are any defects on the rubber silicone seal in the intake manifold, replace it. While installing, make sure all surfaces are clean and if the intake manifold's rubber silicone seal looks damaged, replace it. Replace the gasket where the EGR tube and EGR valve connect, secure the EGR valve bolts only slightly and fit the clamp in the manifold slot, screwing the bolt to 11.3 Nm (100 in. lbs.). After that, secure the EGR valve bolts to 11.3 Nm (100 in. lbs.), reattach the air cleaner box and attach the negative battery cable again.