How to Service and Repair a Front Engine Mount on Dodge Stratus?

To work on the front engine mount, raise the car or truck first. For Horizon/Intercoastal engines, put bolt and AIR pump together and remove the front mount bracket from mount. Release the rear mount bolt, remove the front mount bolts next to the frame and take off the entire front mount. The front mount should be placed and lightly bolted on the lower radiator crossmember for step two of installation. Loosely insert the front mount vertical bolts and then gas up to achieve a tightness of 61 Nm (45 ft. lbs.). Lift the engine in such a way that the weight stays still in the norm of rest. After that, fasten the rear horizontal through bolt to 75 Nm (55 ft. lbs.) and again install the AIR pump. Afterward, torque the front horizontal through bolt to 75 Nm (55 ft. lbs.) and bring the vehicle down.

How to Remove and Install the Left Side Engine Mount, and When Should It Be Replaced on Dodge Stratus?

Any surface cracks on the left side engine mount Hydro-Mount do not affect its work. A leak is, however, a reason to replace it. Place the transmission on a jack and get rid of the three bolts holding the mount to the transmission bracket. Once that's done, unscrew or unfasten the parts connecting the mount to the frame rail and take the mount off. Align the mount and fix it to the frame rail so the fasteners are tightened to 33 Nm (24 ft. lbs.). Should you take off the transmission bracket, reinstall it and tighten down its bolts until they reach 61 Nm (45 ft. lbs.) value. After that, insert the vertical bolts through the mount and into the transmission bracket and snug them down to 61 Nm (45 ft. lbs.).

OEM Dodge Stratus Engine Mount

Engine Motor Mount

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

20 Engine Mounts found

View related parts
Dodge Stratus Motor Mount, Driver Side Part Number: 4573775AB
$197.25 MSRP: $254.00
You Save: $56.75 (23%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Support - Engine Mount; Left Engine Mount; Torque Strut; Bracket; Transfer Case; Transmission Mount; Side Mount; Side Support; Support; Mount; Support Engine Mount
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1995-2006 Dodge Stratus | Base, ES, R/T, SE, SE Plus, SXT | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS, 6 Cyl 2.5 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS
View related parts
Dodge Stratus Mount Bracket, Passenger Side Part Number: 4593455AA
$62.54 MSRP: $103.00
You Save: $40.46 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket - Engine Mount; Engine Mount Bracket; Motor Mount; Strut Bracket; Engine Bracket; Side Bracket; Side Mount Bracket; Bracket Engine Mount
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1995-1999 Dodge Stratus | Base, ES | 4 Cyl 2.0 L GAS
View related parts
Dodge Stratus Motor Mount, Passenger Side Part Number: 4573773AB
$421.33 MSRP: $601.00
You Save: $179.67 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Support - Engine Mount; Engine Mount, Right; Engine Mount Torque Strut; Engine Mount Bracket; Side Mount; Front Mount; Side Support; Support; Mount; Support Engine Mount; Engine Mount
- Position: Passenger Side
- Replaces: 4578001AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1995-2006 Dodge Stratus | Base, ES, R/T, SE, SE Plus, SXT | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS, 6 Cyl 2.5 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS
View related parts
Dodge Stratus Motor Mount Damper Part Number: MR197992
$21.49 MSRP: $27.24
You Save: $5.75 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Insulator - Engine Mount; Engine Mount Isolator; Dynamic Damper; Damper, Engine Mounting Bracket, Front; Damper Engine Mount
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2005 Dodge Stratus | R/T, SE | 6 Cyl 3.0 L GAS
View related parts
Dodge Stratus Engine Support Part Number: 4593337AF
$86.59 MSRP: $109.77
You Save: $23.18 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Support - Engine Support; Engine Mount Bracket; Motor Mount; Rear Mount; Module; Module Engine Support
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1997-2000 Dodge Stratus | ES | 6 Cyl 2.5 L GAS
View related parts
Dodge Stratus Engine Support Part Number: 4593410
$168.31 MSRP: $213.36
You Save: $45.05 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Support - Engine Support; Motor Mount; Support; Module; Screw/Washer, Right Engine Mount; Module, Engine Support; Module Engine Support
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1996-2000 Dodge Stratus | Base, ES, SE | 2.5L V6, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
Dodge Stratus Engine Support, Rear Part Number: 4593337AB
$260.37 MSRP: $330.07
You Save: $69.70 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Support - Engine Support; Engine Mount Bracket, Rear; Engine Mount, Rear; Motor Mount; Rear Mount; Rear Support; Module Engine Support; Engine Mount Bracket; Engine Mount
- Position: Rear
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2006 Dodge Stratus | ES, R/T, SE, SE Plus, SXT | 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS
View related parts
Dodge Stratus Support Bracket Part Number: 4593436AB
$60.62 MSRP: $69.55
You Save: $8.93 (13%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket - Engine Mount; Transmission Mount Bracket; Side Mount; Front Bracket
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1995-2000 Dodge Stratus | Base, ES, SE | 4 Cyl 2.4 L GAS
View related parts
Dodge Stratus Engine Support, Rear Part Number: 4578020AB
Product Specifications
- Other Name: Support - Engine Support; Engine Mount Bracket, Rear; Engine Mount, Rear; Motor Mount; Rear Support; Module Engine Support
- Position: Rear
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2003-2004 Dodge Stratus | ES, SE, SXT | 4 Cyl 2.4 L GAS
View related parts
Dodge Stratus Side Mount Part Number: 4668200
Product Specifications
- Other Name: Support - Engine Mount - Right; Engine Mount Torque Strut; Engine Mount Bracket; Motor Mount; Rear Mount; Bracket; Insulator; Support Engine Mount
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1995-1996 Dodge Stratus | Base, ES | 4 Cyl 2.0 L GAS
View related parts
Dodge Stratus Engine Support Part Number: 4593338AD
Product Specifications
- Other Name: Support - Engine Support; Engine Mount Torque Strut; Engine Mount Bracket; Motor Mount; Front Mount; Engine Carrier; Module Engine Support
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1997-2000 Dodge Stratus | Base, ES, SE | 4 Cyl 2.0 L GAS, 6 Cyl 2.5 L GAS
View related parts
Dodge Stratus Engine Support, Front Part Number: 4578019AC
Product Specifications
- Other Name: Support - Engine Support; Front Engine Mount Bracket; Rear Engine Mount; Torque Strut.; Front Support; Rear Support; Module Engine Support
- Position: Front
- Replaces: 4578019AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2006 Dodge Stratus | ES, R/T, SE, SE Plus, SXT | 2.7L V6, 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS
View related parts
Dodge Stratus Support Bracket Part Number: 4663144AB
Product Specifications
- Other Name: Bracket - Engine Mount; Engine Mount Torque Strut; Engine Mount Bracket; Motor Mount; Side Mount; Front Bracket
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1995-1997 Dodge Stratus | Base, ES | 4 Cyl 2.4 L GAS
View related parts
Dodge Stratus Damper Part Number: 4668171AA
Product Specifications
- Other Name: Damper - Engine Roll
- Replaces: 4668171
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1995-1996 Dodge Stratus | Base, ES | 2.0L L4, 4 Cyl 2.0 L GAS
View related parts
Dodge Stratus Front Mount Part Number: 4668183
Product Specifications
- Other Name: Insulator - Engine Mgt - Front; Engine Mount Bracket; Engine Mount Bushing; Engine Mount; Motor Mount; Mount; Insulator; Insulator Engine Mount
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1996 Dodge Stratus | Base, ES | 4 Cyl 2.0 L GAS
View related parts
Dodge Stratus Front Mount Part Number: 4668182
Product Specifications
- Other Name: Insulator - Engine Mount - Front; Engine Mount Bracket; Engine Mount Bushing; Motor Mount; Mount; Insulator; Insulator Engine Mount; Engine Mount
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1995-1996 Dodge Stratus | Base, ES | 4 Cyl 2.0 L GAS
View related parts
Dodge Stratus Side Mount Part Number: 4668259AB
Product Specifications
- Other Name: Support - Engine Mount; Engine Mount Torque Strut; Engine Mount Bracket; Motor Mount; Rear Mount; Support; Bracket
- Replaces: 4668259
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1995-1996 Dodge Stratus | Base, ES | 2.0L L4, 4 Cyl 2.0 L GAS
View related parts
Dodge Stratus Engine Support Part Number: 4593445AA
Product Specifications
- Other Name: Support - Engine Support; Engine Mount Bracket; Engine Mount; Motor Mount; Rear Mount; Module Engine Support
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2000 Dodge Stratus | SE | 4 Cyl 2.0 L GAS
View related parts
Dodge Stratus Side Mount Part Number: 4668257
Product Specifications
- Other Name: Support - Engine Mount; Engine Mount Torque Strut; Engine Mount Bracket; Motor Mount; Rear Mount; Support; Bracket; Support Engine Mount
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1995-1996 Dodge Stratus | Base, ES | 4 Cyl 2.0 L GAS
View related parts
Dodge Stratus Engine Support, Front Part Number: 4593383AB
Product Specifications
- Other Name: Support - Engine Support; Engine Mount Bracket, Front; Engine Mount, Front; Engine Mount Torque Strut; Motor Mount; Front Support; Front Mount; Module Engine Support; Engine Mount Bracket; Engine Mount
- Position: Front
- Replaces: 4593383AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2006 Dodge Stratus | ES, R/T, SE, SE Plus, SXT | 2.4L L4, 2.7L V6, 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS

Dodge Stratus Engine Mount

Choose OEM Engine Mount that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each Engine Mount follows strict manufacturing steps to lock in quality and fit. If your Dodge Stratus matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Stratus parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

Dodge Stratus Engine Mount is one of those spare parts that represent dependability and power within the Dodge Stratus line-up of cars which was manufactured from the year 1995 up to 2005. As a product vital in the functioning of the model, it helps the Dodge Stratus Engine Mount to safely support the engine as it is enclosed in the chassis thus reducing noise and vibration. This Engine Mount can be installed in different Stratus models such as the sedan and coupe and it helps in the proper running of the engine which can greatly affect the drive. Some of the newly fashionable technologies it comprises are the fluid filled hydraulic engine mounts and the new generations 'active' mounts with varying stiffness levels in relation to the engine revolutions. Not only does the feeling of comfort enhance, but it also raises the lifetime of the engine and the components located near it. Being a relatively fast car, the Dodge Stratus boasts of such figures as 0-60 mph in 7.6 seconds; thus, the reliability of the Engine Mount is crucial to preserving these characteristics. This is mainly due to the Dodge Stratus Engine Mount with the rate of 20-21 for the city driving and 26-29 for the highway. On balance, the Dodge Stratus Engine Mount is a vital part of automobile for its necessity to make the drive turn out to be safe and comfortable, making it a reputable vehicle for Dodge stratus.

Dodge Stratus Engine Mount Parts and Q&A

Motor Mount, Driver Side
4573775AB
Q: How to Service and Repair a Front Engine Mount on Dodge Stratus?
A:
To work on the front engine mount, raise the car or truck first. For Horizon/Intercoastal engines, put bolt and AIR pump together and remove the front mount bracket from mount. Release the rear mount bolt, remove the front mount bolts next to the frame and take off the entire front mount. The front mount should be placed and lightly bolted on the lower radiator crossmember for step two of installation. Loosely insert the front mount vertical bolts and then gas up to achieve a tightness of 61 Nm (45 ft. lbs.). Lift the engine in such a way that the weight stays still in the norm of rest. After that, fasten the rear horizontal through bolt to 75 Nm (55 ft. lbs.) and again install the AIR pump. Afterward, torque the front horizontal through bolt to 75 Nm (55 ft. lbs.) and bring the vehicle down.
Engine Support
4593337AF
Q: How to Remove and Install the Left Side Engine Mount, and When Should It Be Replaced on Dodge Stratus?
A:
Any surface cracks on the left side engine mount Hydro-Mount do not affect its work. A leak is, however, a reason to replace it. Place the transmission on a jack and get rid of the three bolts holding the mount to the transmission bracket. Once that's done, unscrew or unfasten the parts connecting the mount to the frame rail and take the mount off. Align the mount and fix it to the frame rail so the fasteners are tightened to 33 Nm (24 ft. lbs.). Should you take off the transmission bracket, reinstall it and tighten down its bolts until they reach 61 Nm (45 ft. lbs.) value. After that, insert the vertical bolts through the mount and into the transmission bracket and snug them down to 61 Nm (45 ft. lbs.).