How to Maintain a Knock Sensor on a 4-Cylinder Engine on Dodge Stratus?

Before servicing the knock sensor on a 4-cylinder engine, you should first take off the connector from the sensor, since it is screwed into one of the cylinder block's sides. Take out the knock sensor by attaching the crow foot socket on it. While installing, guide the new knock sensor to its previous spot near the starter and secure it with 10 Nm (7 ft. lbs.) of torque, otherwise the performance may be affected and the spark control could be wrong. At the end, link up the electrical connector with the knock sensor.

How to Effectively Service and Install a Knock Sensor on Dodge Stratus?

You must treat the knock sensor with care, since it is mounted next to the starter and threads into the cylinder block. Remove first the electrical connector and then open the knock sensor using a crow foot socket. While installing, place the knock sensor into the cylinder block and tighten with 10 Nm (7 ft. lbs.) torque, since incorrect torque might result in a failing spark control and difficult engine operation. In the end, attach the connector for the electrical harness back to the knock sensor.

OEM Dodge Stratus Knock Sensor

Engine Knock Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Knock Sensors found

View related parts
Dodge Stratus Knock Sensor Part Number: 4606093AD
$103.54 MSRP: $157.00
You Save: $53.46 (35%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Detonation; Ignition Knock (Detonation) Sensor; Sensor; Sensor Detonation
- Replaces: 4606093
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2004-2006 Dodge Stratus | R/T, SXT | 2.7L V6, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS
View related parts
Dodge Stratus Knock Sensor Part Number: 5033316AB
$128.23 MSRP: $194.00
You Save: $65.77 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Knock; Ignition Knock (Detonation) Sensor; MAP Sensor; Sensor Knock
- Replaces: 5033316AA, 56028563AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2003-2006 Dodge Stratus | ES, SE, SXT | 2.4L L4, 4 Cyl 2.4 L GAS
View related parts
Dodge Stratus Knock Sensor Part Number: MD304933
Product Specifications
- Other Name: Sensor - Knock; Ignition Knock (Detonation) Sensor; Sensor Knock
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2005 Dodge Stratus | SE, SXT | 4 Cyl 2.4 L GAS
View related parts
Dodge Stratus Knock Sensor Part Number: MD159216
Product Specifications
- Other Name: Sensor - Knock; Ignition Knock (Detonation) Sensor; Sensor, Electric Control Knock Stamped# F1T15571; Sensor, Electric Control Knock (Detonation); Sensor Knock
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2005 Dodge Stratus | R/T, SE | 6 Cyl 3.0 L GAS
View related parts
Dodge Stratus Knock Sensor Part Number: 4557667
Product Specifications
- Other Name: Sensor - Knock; Ignition Knock (Detonation) Sensor; Sensor, Knock, 3.3-3.8 Engine; Sensor, Knock; Sensor Knock
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2002 Dodge Stratus | ES, SE, SE Plus | 4 Cyl 2.4 L GAS
View related parts
Dodge Stratus Knock Sensor Part Number: 4557667AB
Product Specifications
- Other Name: Sensor - Detonation; Sensor Detonation
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2004 Dodge Stratus | ES, R/T, SE, SE Plus, SXT | 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS

Dodge Stratus Knock Sensor

Choose OEM Knock Sensor that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each Knock Sensor follows strict manufacturing steps to lock in quality and fit. If your Dodge Stratus matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Stratus parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

The Knock Sensor is a part which improves the outlook of Dodge Stratus vehicles to high performance and reliability. This advanced sensor monitors the vibration inside the engine and turn it into an electrical signal to aid the powertrain control module in determining the right timing for the engine knock. This capability is especially important for fine-tuning and protection against the degradation of the engine's performance in cases when fuels of a lower octane number are utilised. The Knock Sensor can fit into different Stratus models manufactured in 1995 and up to the year 2005. Further, Stratus models come in two body types- sedan and coupe; thus, buyers with an interest in either of the two chassis types will find the knock sensor suitable. It is, therefore, significant to the proper functioning of the Dodge Stratus, and smooth running and improved fuel efficiency which sits between 20-29 mpg depending on the road conditions. Importantly, the Knock Sensor is unique among the competitors in the automotive market as it features the possibilities of changing timings for the given cylinders as well as controlling boost pressure and delivering optimum power in various situations. Due to this reliability and performance the Knock Sensor can be rated as the vital part of the engine management system which also add to the durability and efficiency of car. In summary, the Knock Sensor indeed shows how Dodge is weaving quality and sophistication to its automobiles in today's hi-tech world of advancements, thus adding clear value for the car owners of Dodge Stratus.

Dodge Stratus Knock Sensor Parts and Q&A

Knock Sensor
4606093AD
Q: How to Maintain a Knock Sensor on a 4-Cylinder Engine on Dodge Stratus?
A:
Before servicing the knock sensor on a 4-cylinder engine, you should first take off the connector from the sensor, since it is screwed into one of the cylinder block's sides. Take out the knock sensor by attaching the crow foot socket on it. While installing, guide the new knock sensor to its previous spot near the starter and secure it with 10 Nm (7 ft. lbs.) of torque, otherwise the performance may be affected and the spark control could be wrong. At the end, link up the electrical connector with the knock sensor.
Knock Sensor
MD304933
Q: How to Effectively Service and Install a Knock Sensor on Dodge Stratus?
A:
You must treat the knock sensor with care, since it is mounted next to the starter and threads into the cylinder block. Remove first the electrical connector and then open the knock sensor using a crow foot socket. While installing, place the knock sensor into the cylinder block and tighten with 10 Nm (7 ft. lbs.) torque, since incorrect torque might result in a failing spark control and difficult engine operation. In the end, attach the connector for the electrical harness back to the knock sensor.