How to Service and Repair a Tie Rod End on Dodge Stratus?

First, lift the car and remove both the tire and wheel assembly before doing any service or repair on the outer tie rod. Unlock the inner tie rod-to-outer tie rod jam nut, then detach the outer tie rod end nut from the steering knuckle by holding the end stud with an 11/32 socket and loosening and removing the nut quickly. With help from the Remover, Special Tool MB-991113, remove the tie rod end stud from the steering knuckle before detaching the outer tie rod end from the inner one. Begin installation by fastening the outer tie rod onto the inner tie rod and keep the jam nut on the inner tie rod loose at this time. In the next steps, fit the tie rod end seal boot heat shield on the tie rod and slide the tie rod into the steering knuckle, with the nut started onto the stud. Secure the front suspension stud in place and then start to torque the attaching nut with a crowfoot and socket to 61 Nm (45 ft. lbs.), making sure not to twist the steering gear boot. After that, tighten the tie rod jam nut until you reach 61 Nm (45 ft. lbs.). Replace the wheel and tire assembly, lower the car and make the necessary front wheel alignment adjustment.

OEM Dodge Stratus Tie Rod End

Steering Rod End

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Tie Rod Ends found

View related parts
Dodge Stratus Outer Tie Rod, Driver Side Part Number: 5093857AA
$51.29 MSRP: $102.00
You Save: $50.71 (50%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Tie Rod - Steering; Steering Tie Rod End, Left Outer; Drag Link Repair Kit; Outer Tie Rod End; Tie Rod Steering; Tie Rod End
- Position: Outer Driver Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1995-2006 Dodge Stratus | Base, ES, R/T, SE, SE Plus, SXT | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS, 6 Cyl 2.5 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.0 L GAS
View related parts
Dodge Stratus Outer Tie Rod, Passenger Side Part Number: 5094006AA
$48.64 MSRP: $106.00
You Save: $57.36 (55%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Tie Rod - Steering; Steering Tie Rod End, Right Outer; Tie Rod Steering
- Position: Outer Passenger Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1995-2006 Dodge Stratus | Base, ES, R/T, SE, SE Plus, SXT | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS, 6 Cyl 2.5 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.0 L GAS
View related parts
Dodge Stratus Outer Tie Rod Part Number: MR508650
$47.27 MSRP: $59.93
You Save: $12.66 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Tie Rod - Steering; Steering Tie Rod End, Outer; Tie Rod Steering
- Position: Outer
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2005 Dodge Stratus | R/T, SE, SXT | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS

Dodge Stratus Tie Rod End

Choose OEM Tie Rod End that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each Tie Rod End follows strict manufacturing steps to lock in quality and fit. If your Dodge Stratus matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Stratus parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

The Dodge Stratus Tie Rod End is one of those components that make a big difference on the driving experience of the Dodge Stratus, a mid-size car manufactured by the Dodge division of Daimler Chrysler Corporation from 1995 to 2005. Responsibility of this crucial component is to link the steering rack to the steering knuckles so as to afford stability and direction control of the automobile. The Dodge Stratus Tie Rod End therefore includes the inner and outer tie rod ends which help in enhancing the steering meaning that the car can easily be steered, hence enhance the drive of the car. This shows how compatibility with different types of stratus especially the Dodge Stratus sedan as well as coupe models is essential in satisfactorily continuing the functionality and safety of the car. Thus, the proper functioning of the steering system is instrumental with the help of the Dodge Stratus Tie Rod End that helps to avoid the steering problems which might endanger a driver's life at any moment. Incredibly, the Dodge Stratus Tie Rod End can hold this advantage, and by construction, it is a product that endures the wear throughout its operational period within the automotive market. Its structure and the general design, literally assembled to the finest detail, help attain rather high performance figures, including the 0 to 60 mph acceleration in 7.6 seconds. In summary, the Dodge Stratus Tie Rod End is synonymous with quality as it ensures that drivers have control over their authorities by improving the steering responsiveness of the car; therefore is a vital component of the Dodge Stratus family.

Dodge Stratus Tie Rod End Parts and Q&A

Outer Tie Rod, Driver Side
5093857AA
Q: How to Service and Repair a Tie Rod End on Dodge Stratus?
A:
First, lift the car and remove both the tire and wheel assembly before doing any service or repair on the outer tie rod. Unlock the inner tie rod-to-outer tie rod jam nut, then detach the outer tie rod end nut from the Steering Knuckle by holding the end stud with an 11/32 socket and loosening and removing the nut quickly. With help from the Remover, Special Tool MB-991113, remove the tie rod end stud from the steering knuckle before detaching the outer tie rod end from the inner one. Begin installation by fastening the outer tie rod onto the inner tie rod and keep the jam nut on the inner tie rod loose at this time. In the next steps, fit the tie rod end seal boot heat shield on the tie rod and slide the tie rod into the steering knuckle, with the nut started onto the stud. Secure the front suspension stud in place and then start to torque the attaching nut with a crowfoot and socket to 61 Nm (45 ft. lbs.), making sure not to twist the steering gear boot. After that, tighten the tie rod jam nut until you reach 61 Nm (45 ft. lbs.). Replace the wheel and tire assembly, lower the car and make the necessary front wheel alignment adjustment.